Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Victrola The Quincy 6-in-1 Bluetooth Record Player & Multimedia Center. This versatile audio system combines vintage aesthetics with modern functionality, allowing you to enjoy music from various sources including vinyl records, CDs, cassettes, AM/FM radio, and Bluetooth streaming.
Key Features
- 6-in-1 Entertainment Center: Play vinyl records, CDs, cassettes, AM/FM radio, or stream music via Bluetooth or 3.5 mm Aux/headphone jack.
- Integrated Audio System: No external stereo system or additional equipment is required for operation.
- Three-Speed Belt-Driven Turntable: Supports 33 1/3, 45, and 78 RPM records with upgraded sound quality and minimal vibrations.
- Expanded Connection Options: Connect external speakers or an amplifier via RCA Line outputs (cable included) or use the headphone jack for personal listening.
- Intuitive Controls: Features an input select knob, power button, volume knob, AM/FM tuner, playback controls (play/pause/fast forward/rewind), program & repeat buttons, and open/close/eject mechanisms for CD and cassette.
Package Contents
- Victrola The Quincy 6-in-1 Bluetooth Record Player & Multimedia Center
- Power Adapter
- RCA Line Output Cable
- Instruction Manual
- Turntable Slipmat
- 45 RPM Adapter
Setup Instructions
1. Unpacking
Carefully remove the unit from its packaging. Ensure all components listed in the 'Package Contents' section are present. Retain the packaging for future transport or storage.
2. Power Connection
Connect the power adapter to the DC input jack on the rear of the unit, then plug the adapter into a standard wall outlet.
3. Turntable Preparation
Before first use, remove any protective packaging from the turntable platter and tonearm. Ensure the transport screw (if present) is loosened to allow the platter to spin freely. Do not discard the needle protector; it should be re-applied when the unit is not in use to prevent damage.

Operating Instructions
General Controls Overview
The front panel of your multimedia center features various controls for different functions. Familiarize yourself with the Power knob, Input Select knob (Phono, CD, Aux, FM/AM, Bluetooth), Tuning knob, Volume knob, and playback buttons (Program, Repeat, Play/Pause, Fast Forward, Rewind).

Playing Vinyl Records
- Lift the turntable lid.
- Place a vinyl record on the turntable platter. If playing a 45 RPM record, use the included adapter.
- Select 'PHONO' using the Input Select knob.
- Set the speed selector (33, 45, or 78 RPM) to match your record.
- Gently lift the tonearm and position the stylus over the desired track on the record. The platter will begin to spin once the tonearm is moved over the record.
- Lower the tonearm slowly onto the record.
- Adjust the volume to your preference.

Playing CDs
- Select 'CD' using the Input Select knob.
- Press the 'Open/Close' button to open the CD tray.
- Place a CD with the label side facing up into the tray.
- Press the 'Open/Close' button again to close the tray. The CD will begin playing automatically.
- Use the playback buttons (Play/Pause, Fast Forward, Rewind) to control playback.
- Adjust the volume to your preference.

Playing Cassettes
- Select 'TAPE' (or similar, depending on model) using the Input Select knob.
- Insert a cassette tape into the cassette slot on the side of the unit.
- The tape will begin playing automatically.
- Use the playback buttons (Fast Forward, Rewind, Eject) to control playback.
- Adjust the volume to your preference.

AM/FM Radio
- Select 'FM' or 'AM' using the Input Select knob.
- Rotate the 'Tuning' knob to find your desired radio station.
- Adjust the volume to your preference.
Bluetooth Streaming
- Select 'BT' (Bluetooth) using the Input Select knob. The unit will enter pairing mode, indicated by a flashing light or display.
- On your smart device, enable Bluetooth and search for 'Victrola Quincy' (or similar).
- Select the unit from the list of available devices to pair. A confirmation tone or steady light will indicate successful pairing.
- Begin playing music from your device.
- Adjust the volume on both your device and the multimedia center.

Auxiliary Input
- Select 'AUX' using the Input Select knob.
- Connect an external audio device (e.g., MP3 player, smartphone) to the 3.5mm AUX IN jack on the front panel using an auxiliary cable (not always included).
- Begin playing music from your external device.
- Adjust the volume on both your device and the multimedia center.
External Speaker Connection (RCA Output)
To enhance your audio experience, you can connect external speakers or an amplifier to the RCA Line outputs located on the rear of the unit. Use the provided RCA cable to connect the 'L' and 'R' outputs to the corresponding inputs on your external audio equipment.
Maintenance and Care
- Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Avoid abrasive cleaners or solvents.
- Stylus Care: Gently clean the stylus regularly with a soft brush designed for record player needles. Replace the stylus when sound quality deteriorates.
- Record Care: Keep records clean and free of dust. Store them vertically in their sleeves to prevent warping.
- Cassette Care: Ensure tapes are fully rewound before storage. Avoid exposing tapes to extreme temperatures.
- CD Care: Handle CDs by the edges to avoid fingerprints and scratches. Clean with a soft, lint-free cloth if necessary.
- Placement: Place the unit on a stable, level surface away from direct sunlight, heat sources, and excessive dust or moisture.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| No power | Ensure the power adapter is securely connected to the unit and a working wall outlet. Check if the power switch is in the 'ON' position. |
| No sound | Check the volume level. Ensure the correct input source is selected. If using external speakers, verify connections. |
| Turntable not spinning | Confirm the transport screw is loosened. The platter typically starts spinning when the tonearm is moved over the record. |
| Record skipping | Ensure the record is clean and free of dust. Place the unit on a stable surface to minimize vibrations. Check the stylus for damage or wear. |
| Bluetooth not connecting | Ensure the unit is in Bluetooth pairing mode. Turn off and on Bluetooth on your device, then try pairing again. Move your device closer to the unit. |
| CD not playing | Ensure the CD is clean and inserted correctly (label side up). Try a different CD to rule out a disc issue. |
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 18.1 x 25.65 x 9.5 inches |
| Item Weight | 17.31 pounds |
| Item Model Number | VTA-200B-NAT |
| Brand | Victrola |
| Maximum Rotational Speed | 78 RPM |
| Special Feature | Bluetooth |
| Material | Wood |
| Color | Natural |
| Compatible Devices | Speaker |
| Motor Type | AC Motor |

Warranty and Support
Victrola products are designed for quality and reliability. For information regarding warranty coverage, product registration, or technical support, please refer to the official Victrola website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Online Support: Visit the official Victrola Store for FAQs and additional resources.





