KEDIERS P6 ATX Mid Tower PC Case User Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your KEDIERS P6 ATX Mid Tower PC Case. The P6 case is designed with a 270° panoramic view, featuring full glass front and side panels, and a 1.2mm fine steel mesh for enhanced airflow and dust filtration. It comes with 5 pre-installed adjustable speed ARGB fans and supports a wide range of components, including 360mm radiators.

Image: KEDIERS P6 ATX Mid Tower PC Case showcasing its panoramic design and internal components.

Setup and Installation

1. Panel Removal and Access

The KEDIERS P6 case features advanced quick-release panels for convenient access. To remove the side glass panel, first gently lift the top panel, which is secured by magnets. Once the top panel is removed, the side glass panel can be easily detached without the need for screws, thanks to its secure rivet-mounted mechanism. This design minimizes the risk of accidental glass breakage and simplifies component installation.

Image: Exploded view illustrating the removable panels and components of the KEDIERS P6 case.

2. Motherboard and Component Installation

The P6 ATX tower case offers a spacious layout compatible with ATX, Micro-ATX, and Mini-ITX motherboards. It provides ample room for CPU coolers up to 165mm in height and GPUs up to 410mm in length.

Image: Detailed dimensions and component support for the KEDIERS P6 ATX tower case.

3. Drive Installation

The case supports multiple storage configurations. It includes slots for 2.5-inch SSDs and 3.5-inch HDDs, providing large storage capacity.

Image: Storage drive installation locations within the KEDIERS P6 case, also showing cable management space.

4. Cooling System Installation

The KEDIERS P6 comes with 5 pre-installed adjustable speed ARGB fans. The case supports 360mm radiators and offers flexible fan placement options for optimal cooling performance.

• Pre-installed Fans: 5 ARGB fans are pre-installed to ensure proper airflow.
• Radiator Support: Supports 360mm, 280mm, 240mm, and 120mm radiators.
• Fan Support:
  • Rear: 120mm x 1
  • Top: 120mm x 3 / 140mm x 3
  • Bottom: 120mm x 3
  • Side: 120mm x 2

Image: The pre-installed 5-fan system in the KEDIERS P6 case.

Image: Cooling capacity and fan/radiator support configurations.

5. Cable Management

The P6 case features super cable routing, where the 5 ARGB case fans require only one advanced cable connection, simplifying the wiring process. There is a large space behind the motherboard tray for hidden cable management, ensuring a clean and organized build.

Operating Instructions

1. Front I/O Panel

The upgraded high-speed I/O panel includes a Type-C port for faster data transfer, USB 3.0, USB 2.0 ports, a headphone/microphone combo jack, and a reset button.

• Type-C Port: For high-speed data transfer. Not recommended for power charging.
• USB 3.0 Ports: For connecting various devices.
• USB 2.0 Ports: For connecting various devices.
• Audio Jack: Combined headphone and microphone port.
• Reset Button: To restart the system.

Image: Front I/O panel with labeled ports and buttons.

2. ARGB Fan Control

The pre-installed ARGB fans can be controlled via motherboard software, allowing customization of various lighting modes. Connect the fans to a +5V ARGB motherboard header. If your motherboard lacks a +5V 3-pin RGB interface, a 12V 4-pin interface can use an RGB converter.

Image: ARGB fan connection diagram for motherboard software control.

3. Airflow and Cooling Performance

The case's design, including the 1.2mm fine mesh and anti-vortex fan blades, ensures streamlined airflow and superior cooling performance, extending hardware life.

Image: Airflow paths and cooling channels within the KEDIERS P6 case.

Maintenance

1. Dust Filter Cleaning

The KEDIERS P6 case is equipped with high-quality dust filters, including a dust filter mesh with a magnetic sticker design. These filters prevent dust accumulation and maintain normal ventilation. Regularly remove and clean the filters to ensure optimal performance and longevity of your components.

Image: Magnetic dust filters for easy removal and cleaning.

2. Panel Re-installation

After maintenance or component upgrades, carefully re-install the side glass panel by aligning it with the rivet-mounted mechanism, then secure the top panel back into place using its magnetic attachment. Ensure all panels are properly seated to maintain optimal airflow and dust protection.

Troubleshooting

If you encounter issues during setup or operation, please review the following common points:

• Power On Issues: Ensure all power supply cables are securely connected to the motherboard, GPU, and other components. Verify the power button cable is correctly attached to the motherboard's front panel header.
• Fan/ARGB Lighting Not Working: Check that the ARGB fan cables are properly connected to the +5V ARGB header on your motherboard. If your motherboard lacks a +5V 3-pin RGB interface, a 12V 4-pin interface can use an RGB converter. Confirm motherboard software is installed and configured for ARGB control.
• USB Ports Not Functioning: Verify that the USB 3.0, USB 2.0, and Type-C cables from the front I/O panel are correctly connected to their respective headers on the motherboard.
• Overheating: Ensure all fans are spinning correctly and are oriented for optimal airflow (intake/exhaust). Check that dust filters are clean and not obstructing airflow. Verify CPU cooler and GPU cooling solutions are properly installed.

Specifications

Warranty and Support

For warranty information and technical support, please refer to the official KEDIERS website or contact their customer service directly. Keep your purchase receipt for warranty claims.

Official Product Videos