Solac Niagara Pro Vertical Steam Iron User Manual

Product Overview

The Solac Niagara Pro Vertical Steam Iron is designed for quick and efficient garment care, allowing you to iron clothes directly on their hangers. It not only smooths fabrics but also disinfects and refreshes them. With 1680W of power and a continuous steam output of 40g/min, it removes wrinkles rapidly, ready for use in just 25 seconds.

Figure 1: Solac Niagara Pro Vertical Steam Iron, side view.

Figure 2: Solac Niagara Pro Vertical Steam Iron, front view, highlighting the ceramic soleplate.

Safety Instructions

• Always unplug the appliance from the power outlet before filling or emptying the water tank, and before cleaning.
• Do not immerse the appliance in water or any other liquid.
• Keep the appliance out of reach of children.
• Do not touch the hot soleplate or steam nozzle during operation.
• Use only distilled or demineralized water to prevent mineral buildup.
• Ensure the power cord is not damaged and avoid kinking or stretching it.
• The appliance is equipped with an auto-off safety system that turns off the iron after a period of inactivity.

Setup

1. Unpacking and Initial Inspection

Carefully remove all packaging materials and inspect the steam iron for any signs of damage. Ensure all components are present: the main unit, water tank, lint brush accessory, and delicate fabric accessory.

Figure 3: The Solac Niagara Pro Vertical Steam Iron shown with its included accessories: a lint brush and a delicate fabric pad.

2. Filling the Water Tank

1. Ensure the appliance is unplugged.
2. Detach the water tank from the main unit. The tank is designed for easy removal.


Figure 4: Demonstrates how to detach the water tank from the main body of the steam iron for refilling.

3. Open the water tank cap.
4. Fill the 200ml water tank with distilled or demineralized water. Do not overfill beyond the MAX line.


Figure 5: Illustrates the process of filling the water tank with water, ensuring it does not exceed the maximum fill line.

5. Close the cap securely and reattach the water tank to the main unit until it clicks into place.

3. Attaching Accessories

The steam iron comes with two accessories: a lint brush and a delicate fabric pad. These can be easily attached to the steam head by aligning them and pressing firmly until they click into position. Choose the appropriate accessory based on the fabric type.

Operating Instructions

1. Powering On and Heating

1. Plug the appliance into a suitable power outlet. The indicator light will illuminate.
2. The iron will heat up rapidly, becoming ready for use in approximately 25 seconds. The indicator light will change or stop blinking when ready.

2. Selecting Steam Mode

The Solac Niagara Pro offers two continuous steam modes: Eco and Max. Press the steam button to cycle between these modes, selecting the one suitable for your garment's needs.

3. Steaming Garments

Hold the steam iron vertically, keeping the soleplate a few centimeters away from the fabric. Press the steam trigger to release steam. Move the iron slowly over the garment, from top to bottom, to remove wrinkles. For best results, gently pull the fabric taut with your free hand.

Figure 6: Demonstrates the vertical steaming technique on a curtain, showing the steam being applied to remove creases.

Figure 7: Shows the steam iron in use on a shirt, illustrating how to effectively remove wrinkles from hanging garments.

The ceramic soleplate ensures ultra-smooth gliding, making it suitable for all types of garments, including delicate fabrics and curtains. The 2-meter cable provides ample freedom of movement.

4. Auto-Off Safety Feature

For your safety, the appliance is equipped with an automatic shut-off system. If left inactive for a certain period, the iron will automatically turn off. The indicator light will signal this status.

Maintenance

1. Cleaning the Appliance

1. Always unplug the steam iron and allow it to cool completely before cleaning.
2. Empty any remaining water from the tank.
3. Wipe the exterior of the appliance with a soft, damp cloth. Do not use abrasive cleaners or solvents.
4. Clean the ceramic soleplate with a damp cloth. Do not use metallic or abrasive pads.
5. Clean the accessories (lint brush, delicate fabric pad) as needed with a damp cloth and allow them to air dry.

2. Descaling

To maintain optimal performance and extend the life of your steam iron, regular descaling is recommended, especially if using tap water (though distilled water is preferred). Refer to the manufacturer's descaling solution instructions or use a mixture of white vinegar and water (1:1 ratio). Run the solution through the steamer following the operating instructions, then rinse thoroughly with clean water.

3. Storage

Store the cooled and emptied steam iron in a dry place, away from direct sunlight and moisture. Ensure the power cord is neatly wrapped and not kinked.

Troubleshooting

If the problem persists after trying these solutions, please contact customer support.

Specifications

• Brand: Solac
• Model Number: S91870400 (also PC1503 mentioned in some specifications)
• Color: White, Grey
• Power: 1680 Watts
• Continuous Steam Output: 40g/min
• Water Tank Capacity: 200 ml
• Heating Time: Approximately 25 seconds
• Soleplate Material: Ceramic
• Product Dimensions (L x W x H): 32 x 17 x 13.5 cm
• Item Weight: 1.6 Kilograms
• Cable Length: 2 meters
• Safety Feature: Auto-off system

Warranty and Support

This product is covered by the standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Solac website.

For technical support, troubleshooting assistance, or spare parts inquiries, please contact Solac customer service. Contact information can typically be found on the manufacturer's website or on the product packaging.

Return Policy: The product is subject to a 30-day refund/replacement return policy from the date of purchase, as per the seller's terms.