Hygger Clip-on Aquarium Light 10W User Manual

1. Introduction

Thank you for choosing the Hygger Clip-on Aquarium Light. This full-spectrum LED light is designed to provide optimal illumination for freshwater planted aquariums ranging from 18-30 cm (7-12 inches) in length. It features a user-friendly controller with adjustable timer settings, 10 color options, 10 brightness levels, a DIY color mode, and a 24/7 natural light cycle simulation.

2. Safety Instructions

Always disconnect the power supply before performing any maintenance or installation.
This product is designed for indoor use only. Do not expose to rain or moisture.
Ensure your hands are dry when handling the power adapter or plugging/unplugging the unit.
Do not operate if the light or power cord is damaged.
Keep out of reach of children.
The lamp beads are waterproof, but the controller and power adapter are not. Avoid submerging the controller or adapter in water.

3. Package Contents

Please check the package for the following items:

Hygger Clip-on Aquarium Light (10W)
Power Adapter with Controller
User Manual

4. Setup

Unpack all components and inspect them for any damage.
Attach the clip of the light fixture securely to the rim of your aquarium. Ensure the light is centered over the tank for even illumination. The improved clip design accommodates various glass thicknesses.
Connect the power adapter to the light fixture.
Plug the power adapter into a suitable electrical outlet.

Hygger Clip-on Aquarium Light installed on a fish tank — Image 1: The Hygger Clip-on Aquarium Light securely attached to the rim of an aquarium.

5. Operating Instructions

The light features an intuitive controller for easy adjustments. Refer to the controller diagram below for button functions.

Hygger Aquarium Light Controller with labeled buttons for time, color, brightness, DIY, and 24/7 mode — Image 2: Overview of the Hygger Aquarium Light Controller, showing options for setting time, color, brightness, DIY mode, and 24/7 natural mode.

5.1. Setting the Timer

The controller offers 6 timer options for scheduled operation:

Daytime Options: 6 hours, 8 hours, 12 hours.
Nighttime Options: 3 hours, 5 hours, 12 hours.

Select the desired duration using the timer button on the controller. The light will operate for the chosen period and then turn off.

5.2. Color Adjustment

The light provides 10 preset colors to enhance your aquarium's appearance. Press the 'Color' button on the controller to cycle through the available colors:

White, Red, Green, Blue, Orange, Pink, Cyan, Yellow, Light Green, Rose Red.

Display of 10 preset lighting colors for the Hygger aquarium light, including white, red, green, blue, orange, pink, cyan, yellow, light green, and rose red. — Image 3: Visual representation of the 10 preset lighting colors available with the Hygger aquarium light.

5.3. Brightness Adjustment

Adjust the light intensity to suit your needs with 10 levels of brightness, ranging from 10% to 100%. Use the brightness control buttons on the controller to increase or decrease the intensity.

5.4. DIY Mode

The DIY mode allows you to create custom colors by individually adjusting the brightness of the Red, Green, and Blue (RGB) LEDs. This feature enables you to mix thousands of unique light colors.

Examples of 16 million DIY colors created by adjusting Red, Green, and Blue light components on the Hygger aquarium light. — Image 4: Illustrations of various custom colors achievable through the DIY RGB mixing mode.

5.5. 24/7 Natural Mode

This mode simulates a natural light cycle from dawn to dusk, promoting a healthy environment for your aquatic life. The default cycle is:

6:00 AM - 8:30 AM: Gradual transition to orange light (sunrise).
8:30 AM - 5:30 PM: White light (daylight).
10:30 PM - 6:00 AM: Lights off (night).

You can adjust the start time of the 24/7 cycle to 6 AM, 7 AM, or 8 AM. The lights will automatically turn off at 10:30 PM regardless of the chosen start time.

Diagram illustrating the 24/7 natural light mode cycle, showing transitions from orange light (sunrise), to white light (day), to blue light (sunset), and then off. — Image 5: Visual representation of the 24/7 natural light cycle, depicting the progression of light colors throughout the day.

6. Maintenance

Regularly wipe the light fixture with a soft, damp cloth to remove dust and water spots.
Ensure the light is unplugged before cleaning.
Do not use abrasive cleaners or solvents, as they may damage the fixture.
Check the power cord and connections periodically for any signs of wear or damage.

7. Troubleshooting

Light not turning on: Check if the power adapter is securely connected to both the light and the electrical outlet. Ensure the outlet is functional.
Incorrect light settings: Review the operating instructions for setting the timer, color, brightness, and modes. Reset the controller if necessary by unplugging and replugging the power.
Flickering light: Ensure all connections are secure. If flickering persists, contact customer support.

8. Specifications

Feature	Specification
Power	10 W
Number of Lamp Beads	30 pieces (White: 16, Red: 1, Green: 1, Blue: 6, RGB: 6)
Applicable Aquarium Length	18-30 cm (7-12 inches)
Power Cord Length	5 ft + 2 ft (approx. 2.1 meters total)
Input Voltage	AC 100-240V
Output Voltage	DC 20V
Color Temperature	6500-10000 K (Average 9250 K)
Lumens	412.6 lm
Light Efficiency	73.91 lm/W
Color Rendering Index (CRI)	85%
Product Dimensions	21 x 9.5 x 9 cm
Product Weight	400 g
Material	Plastic, Glass (Shade)

Detailed specifications table and full spectrum graph for Hygger aquarium lights, showing LED quantities, light sizes, and application ranges. — Image 6: Technical specifications and spectral distribution chart for the Hygger aquarium light series.

9. Warranty and Support

Hygger products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Hygger website. Please retain your proof of purchase for warranty claims.

10. Product Videos

No official product videos are available for embedding at this time.

	Hygger HG-990 Aquarium Clip-On Light User Manual User manual for the Hygger HG-990 Planted + 24/7 Aquarium Clip-On Light, detailing product features, parameters, application methods, safety precautions, warranty, and disposal.
	Hygger HG-990 Aquarium Clip-On Light User Manual Comprehensive user manual for the Hygger HG-990 Planted + 24/7 Aquarium Clip-On Light. Learn about product features, parameters, application methods, and safety precautions for optimal aquarium lighting.
	Hygger HG018 24/7 Aquarium Clip-On Light User Manual Comprehensive user manual for the Hygger HG018 clip-on aquarium light, detailing features, specifications, installation, operation, and safety precautions for planted and freshwater aquariums.
	Hygger HG211 Aqua Puredigest Pro User Manual This user manual provides detailed instructions for the Hygger HG211 Aqua Puredigest Pro, a microbial formula for aquarium ecosystems. It covers product description, usage guidelines, application scenarios, precautions, warranty information, and contact details for Hygger Aquarium, Inc., helping users maintain healthy aquatic environments.
	Hygger HG-957 Aquarium Extendable LED Light User Manual Detailed user manual for the Hygger HG-957 Aquarium Extendable LED Light, covering features, product parameters, safety instructions, operation modes (Standard, Manual, DIY), installation, and troubleshooting. Learn how to set up and program your aquarium lighting for optimal plant growth and aquarium aesthetics.
	Hygger HG192 UFO Planted Tank Light User Manual \| Enhance Aquarium Plant Growth Detailed user manual for the Hygger HG192 UFO Planted Tank Light. Learn about features, installation, specifications, and warranty for optimal aquatic plant growth and fish health. Includes models HG192-55W, HG192-75W, HG192-95W.

Hygger 10W