User Manual: Idealstream Bath & Shower Mixer and Eurostorm Basin Mixer

1. Product Overview

This manual provides instructions for the installation, operation, and maintenance of the Idealstream Bath & Shower Mixer and the Eurostorm Basin Mixer. These products are designed for reliable performance and ease of use in your bathroom.

Figure 1: Idealstream Bath & Shower Mixer (top) and Eurostorm Basin Mixer (bottom). Both fixtures feature a polished chrome finish and a single lever handle.

The Idealstream Bath & Shower Mixer is a wall-mounted unit, while the Eurostorm Basin Mixer is a centerset installation. Both feature a single lever handle for controlling water flow and temperature.

2. Safety Information

Important Safety Instructions:

• Always turn off the main water supply before beginning any installation or maintenance work.
• Ensure all connections are secure to prevent leaks.
• If you are unsure about any part of the installation process, consult a qualified plumber.
• Do not use abrasive cleaners or harsh chemicals on the chrome finish, as this may damage the surface.
• Keep small parts out of reach of children.

3. Package Contents

Please verify that all components are present before beginning installation:

• Idealstream Bath & Shower Mixer (1 unit)
• Eurostorm Basin Mixer (1 unit)
• Mounting hardware for both mixers
• Flexible supply lines for basin mixer (typically pre-attached or included)
• Handle(s) (included as part of the mixer assembly)
• Instruction manual (this document)

4. Setup and Installation

4.1. General Preparation

1. Turn off the main water supply to your home.
2. Clear the installation area and ensure you have adequate lighting.
3. Gather necessary tools (e.g., adjustable wrench, screwdriver, plumber's tape).

4.2. Idealstream Bath & Shower Mixer (Wall Mount)

1. Ensure the wall connections are properly prepared and spaced for the mixer.
2. Apply plumber's tape to the threaded ends of the water supply pipes.
3. Attach the mixer to the wall connections, ensuring a tight and leak-free seal.
4. Secure the mixer to the wall using the provided mounting hardware.
5. Connect the shower hose and head (if applicable) to the designated outlet.

4.3. Eurostorm Basin Mixer (Centerset)

1. Insert the basin mixer into the pre-drilled hole on your basin or countertop.
2. Secure the mixer from underneath the basin using the provided mounting nut and washer.
3. Connect the flexible supply lines from the mixer to your hot and cold water supply valves. Ensure hot and cold lines are connected correctly.
4. Tighten all connections, but do not overtighten.

4.4. Post-Installation

1. Slowly turn on the main water supply.
2. Check all connections for leaks. If leaks are present, tighten connections further or re-apply plumber's tape.
3. Test the operation of both mixers.

5. Operating Instructions

Both the Idealstream Bath & Shower Mixer and the Eurostorm Basin Mixer operate using a single lever handle.

• Water Flow: Lift the lever handle upwards to increase water flow. Push it downwards to decrease flow and turn off the water.
• Temperature Control: Move the lever handle to the left for hot water and to the right for cold water. Adjust the position between left and right to achieve the desired water temperature.
• Bath/Shower Diverter (Idealstream Mixer): The Idealstream Bath & Shower Mixer includes a diverter knob or pull-up mechanism, typically located on the spout. Pull or turn this knob to switch water flow between the bath spout and the shower head.

6. Maintenance

Regular cleaning and maintenance will ensure the longevity and appearance of your Ideal mixers.

• Cleaning the Finish: Clean the chrome finish regularly with a soft cloth and mild soap and water. Rinse thoroughly and dry immediately to prevent water spots.
• Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or cleaners containing bleach or alcohol, as these can damage the chrome finish.
• Aerator Cleaning: If water flow becomes restricted, the aerator (at the end of the spout) may be clogged with debris. Unscrew the aerator, clean any sediment, and rinse before reattaching.
• Leak Checks: Periodically check all connections for any signs of leaks. Tighten connections if necessary.

7. Troubleshooting

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact a qualified plumber or the manufacturer's customer support.

8. Specifications

9. Warranty and Support

For warranty information, please refer to the documentation provided at the time of purchase or contact the retailer where the product was acquired. Warranty terms and conditions may vary.

For technical support or further assistance, please contact Ideal customer service or the authorized distributor in your region. Contact details can typically be found on the manufacturer's official website or on your purchase receipt.