Hampton Bay Juliard 13 in. 2-Light Chrome and Crystal Flush Mount Instruction Manual

Important Safety Information

Please read and understand all instructions before beginning assembly and installation. Failure to do so could lead to fire, electric shock, or other injuries.

• Always turn off the power at the main fuse or circuit breaker box before beginning installation.
• Consult a qualified electrician if you have any electrical questions.
• Use only UL/cUL listed wire connectors.
• This fixture is designed for indoor use only.
• Do not exceed the recommended wattage for light bulbs.
• Handle crystal components with care to prevent breakage.

Package Contents

Verify that all parts listed below are included in your package. If any parts are missing or damaged, contact customer service before proceeding with installation.

• A. Fixture Body (1)
• B. Mounting Bracket (1)
• C. Wire Connectors (3)
• D. Mounting Screws (2)
• E. Decorative Nut (1)
• F. Crystal Strands/Components (Quantity as specified by design)

Figure 1: Close-up of the Hampton Bay Juliard 13 in. 2-Light Chrome and Crystal Flush Mount fixture, detailing the chrome finish and the arrangement of the crystal elements. This image provides a clear view of the product's aesthetic design and material quality.

Tools Required (Not Included)

• Phillips Head Screwdriver
• Wire Strippers
• Electrical Tape
• Safety Glasses
• Stepladder

Installation Instructions

1. Turn Off Power: Before starting, ensure the power to the junction box is turned off at the circuit breaker or fuse box.
2. Attach Mounting Bracket: Secure the mounting bracket (B) to the junction box using the provided mounting screws (D). Ensure the bracket is firmly attached.
3. Wire Connections:
   • Connect the bare copper ground wire from the fixture to the ground wire from the junction box using a wire connector (C).
   • Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box using a wire connector (C).
   • Connect the black (live) wire from the fixture to the black (live) wire from the junction box using a wire connector (C).
   • Carefully tuck all wires into the junction box.
4. Attach Fixture Body: Align the fixture body (A) with the mounting bracket (B) and secure it in place with the decorative nut (E).
5. Install Crystals: Carefully attach the crystal strands/components (F) to the fixture body according to the design. Refer to the product image for guidance.
6. Install Light Bulbs: Insert two (2) appropriate light bulbs (not included) into the sockets. Do not exceed the maximum wattage specified on the fixture.
7. Restore Power: Once installation is complete, turn the power back on at the circuit breaker or fuse box.

Figure 2: The Hampton Bay Juliard 13 in. 2-Light Chrome and Crystal Flush Mount fixture as it appears when installed on a ceiling. This image illustrates the fixture's scale and how it integrates into a typical room environment, highlighting its flush-mount design.

Operating Instructions

This fixture is designed for standard wall switch operation. Additionally, it features remote control capability as indicated in the product specifications.

• Wall Switch: Flip the wall switch connected to the fixture to turn the light on or off.
• Remote Control: If a remote control was included or purchased separately, refer to its specific instructions for pairing and operation. Typically, the remote allows for turning the light on/off and potentially dimming or changing light modes, depending on the bulb type and remote features.

Maintenance

Regular cleaning will help maintain the appearance and performance of your fixture.

• Cleaning the Fixture: Always turn off the power before cleaning. Wipe the chrome finish with a soft, dry cloth. Do not use abrasive cleaners, polishes, or chemicals, as they may damage the finish.
• Cleaning Crystals: The crystal components can be gently wiped with a soft, damp cloth. For a deeper clean, a mild glass cleaner can be sparingly applied to the cloth, not directly to the crystals. Ensure no liquid enters the electrical components.
• Bulb Replacement: Ensure the power is off and the bulbs have cooled before replacing. Use only bulbs of the same type and wattage as originally installed or as specified on the fixture.

Troubleshooting

Specifications

Warranty and Support

This Hampton Bay product is backed by a limited manufacturer's warranty. Please retain your proof of purchase for warranty claims.

For technical assistance, missing parts, or warranty inquiries, please contact Hampton Bay customer service. Contact information can typically be found on the product packaging or the retailer's website where the product was purchased.

For further information, you may visit the official Hampton Bay website or the retailer's support page.