1. Introduction
Thank you for choosing the Sandinrayli End Table with Charging Station. This versatile piece of furniture is designed to enhance your living space with convenient storage and integrated power solutions. Featuring two spacious drawers, an open shelf, and a built-in power strip with AC outlets and USB ports, this end table is perfect for bedrooms, living rooms, or small spaces. Please read this manual carefully before assembly and use to ensure proper installation and safe operation.
Figure 1.1: Sandinrayli End Table with Charging Station.
2. Safety Information
WARNING: Failure to follow these safety instructions may result in injury or damage to the product.
- Do not exceed the stated weight limits for the table top (220 lb), shelf (100 lb), and drawers (40 lb).
- Assemble the product strictly according to the detailed manual provided. Incorrect assembly can lead to instability and potential hazards.
- Keep power outlets and USB ports away from water and any foreign objects to prevent electrical shock or damage.
- Always unplug the power cable from the wall outlet when the charging station is not in use or during cleaning.
- Ensure the power cable is not pinched or routed in a way that could cause damage or a tripping hazard.
- This product is intended for indoor use only.
3. Package Contents
Before beginning assembly, ensure all parts and hardware are present. Refer to the included parts list in your physical manual for specific quantities and identification. Typically, your package will include:
- Table Panels (Top, Side, Bottom, Shelf, Drawer components)
- Hardware (Screws, Dowels, Cam Locks, Drawer Slides, Handles)
- Integrated Power Strip with USB Ports and AC Outlets
- Power Cable
- User Manual (this document)
If any parts are missing or damaged, please contact Sandinrayli customer support immediately.
4. Assembly Instructions
Assembly is required for this product. It is recommended to have a Phillips head screwdriver and a clear, spacious area for assembly. Follow the steps below carefully.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface to prevent scratches. Identify each part by comparing it to the parts list in your physical manual.
- Assemble Side Panels and Frame: Attach the side panels to the top and bottom panels using the provided hardware (e.g., cam locks and dowels). Ensure all connections are secure and aligned.
- Install Middle Shelf: Secure the middle shelf into the designated slots or with appropriate hardware, ensuring it is level and stable.
- Attach Drawer Slides: Install the drawer slides to the inner side panels of the table frame. Pay close attention to the orientation of the slides (left/right, front/back) as indicated in the physical manual.
- Assemble Drawers: Construct the two drawers by attaching the front, back, and side panels, and then securing the bottom panel. Install the drawer handles to the front panels.
- Insert Drawers: Carefully slide the assembled drawers onto the installed drawer slides. Ensure they glide smoothly.
- Install Power Strip: Place the integrated power strip into its designated recessed area, typically on the middle shelf. Route the power cable through the cable management hole at the back of the table.
- Final Checks: Once assembled, gently lift and move the table to its desired location. Ensure all connections are tight and the table is stable.
Figure 4.1: Product Dimensions and Load Capacities.
Figure 4.2: Stable Construction with Solid Wood Supports.
5. Operating Instructions
5.1 Using the Charging Station
The Sandinrayli End Table is equipped with a convenient recessed power strip to charge your electronic devices.
- Power Connection: Plug the 6.5-foot power cable from the end table into a standard wall outlet (120V/12A).
- AC Outlets: Use the two 125V/12A AC outlets to power lamps, laptops, or other small appliances.
- USB Ports: Use the two 5V/2A USB ports to charge smartphones, tablets, and other USB-powered devices.
- Cable Management: Utilize the cable management hole at the back of the table to keep cords tidy and out of sight.
Figure 5.1: Recessed Power Strip with AC Outlets and USB Ports.
5.2 Using the Drawers and Shelf
The end table provides ample storage for various items.
- Drawers: The two drawers are ideal for storing small necessities, remote controls, or personal items, keeping your space clutter-free. Each drawer supports up to 40 lb.
- Open Shelf: The open shelf is suitable for placing books, magazines, or a tablet. It supports up to 100 lb.
- Table Top: The top surface can be used for displaying decorative items, a lamp, or for placing beverages. It supports up to 220 lb.
Figure 5.2: Spacious Drawers for Storage.
6. Maintenance
Proper care will extend the life and appearance of your Sandinrayli End Table.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
- Spills: Immediately wipe up any spills to prevent staining or damage to the wood.
- Electrical Components: Keep the power outlets and USB ports clean and free of dust. Do not attempt to clean them with liquids while plugged in.
- Hardware: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Sunlight and Heat: Avoid placing the table in direct sunlight or near heat sources, as this can cause fading or warping of the wood.
7. Troubleshooting
If you encounter any issues with your end table, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Power outlets/USB ports not working. | Not plugged in; tripped circuit breaker; damaged power strip. | Ensure the table's power cable is securely plugged into a working wall outlet. Check your home's circuit breaker. If the issue persists, the power strip may be faulty; contact customer support. |
| Drawers do not slide smoothly or get stuck. | Incorrectly installed drawer slides; debris in slides; loose hardware. | Remove drawers and inspect slides for proper alignment and any obstructions. Ensure all screws on the slides are tight. Refer to assembly instructions for correct slide orientation. |
| Table feels wobbly or unstable. | Loose assembly hardware; uneven floor. | Check and tighten all screws, cam locks, and other fasteners. Ensure the table is placed on a flat, level surface. If necessary, use furniture pads under the legs to level the table. |
| Missing parts during assembly. | Packaging error. | Do not attempt to force assembly with incorrect or missing parts. Contact Sandinrayli customer support with your purchase details and the specific missing part number. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Sandinrayli |
| Model Number | B0CCLGYK1M |
| Product Dimensions (D x W x H) | 23.62" x 11.81" x 24.01" |
| Item Weight | 48.3 Pounds |
| Color | Black |
| Material Type | Engineered Wood, Metal, Pine, Wood |
| Number of Drawers | 2 |
| Number of Shelves | 1 (open shelf) |
| Max. Weight Capacity (Table Top) | 220 Pounds |
| Max. Weight Capacity (Shelf) | 100 Pounds |
| Max. Weight Capacity (Drawers) | 40 Pounds |
| Power Outlets | 2 x 125V/12A AC Outlets |
| USB Ports | 2 x 5V/2A USB Ports |
| Power Cord Length | 6.5 feet |
| Tools Recommended for Assembly | Screwdriver |
9. Warranty and Support
Sandinrayli is committed to providing quality products. While specific warranty details are not provided in this manual, most products come with a limited warranty against manufacturing defects. Please retain your proof of purchase for any warranty claims.
For customer support, missing parts, or any inquiries regarding your Sandinrayli End Table, please contact the seller directly through your purchase platform or visit the official Sandinrayli store:
- Seller Name: SANDINRAYLI
- Amazon Store: Visit Sandinrayli Store on Amazon
Please have your model number (B0CCLGYK1M) and purchase date ready when contacting support.
