Boolegon Blackout Roller Shades User Manual

1. Product Features

• Linen Fabric: Crafted from new linen fabric with an interlaced weave, offering a richer texture and delicate, skin-friendly feel. Provides 100% blackout, UV protection, thermal insulation, and privacy.
• Cordless Free-Stop System: Designed for safety, this system allows you to pull down or push up the shade to stop at any desired position, protecting children and pets from harm.
• Enhanced Blackout Design: Features a baffle and hidden mounting code to effectively solve light leakage issues from the top, ensuring maximum darkness and privacy.
• Durable 38mm Roll Tube: A thickened roll tube provides better stress distribution and supports a wider range of sizes. Its close fit to the fabric minimizes gaps between the shade and the window frame for superior light blocking.

2. What's Included in the Package

Your Boolegon Blackout Roller Shade package includes the following components:

• Stylish Roller Shade (x1)
• Brackets (x2)
• Screws (x4)
• Handle (x1)
• User Manual (this document)

Image: Components included in the Boolegon Blackout Roller Shade package.

3. How to Measure Your Windows

Accurate measurements are crucial for a perfect fit. Please refer to the guidelines below:

Inside Mount

• Window frame depth required: Minimum 2 inches.
• Blind Width: Window Width - 1/4 inch.
• Blind Height: Equal to or greater than Window Height.

Outside Mount

• Blind Width: Window Width + 4 inches (for better coverage).
• Blind Height: Window Height + 4 inches (for better coverage).

Image: Detailed instructions for measuring your windows for both inside and outside mount installations.

4. Setup (Installation Instructions)

Follow these steps to install your Boolegon Blackout Roller Shades:

1. Determine Mounting Type: Decide whether you will use an inside mount (within the window frame) or an outside mount (outside the window frame), based on your measurements.
2. Mark Bracket Positions: Using your measurements, mark the precise locations for the two brackets on your window frame or wall. Ensure they are level and spaced correctly to support the shade.
3. Install Brackets: Securely attach the brackets to the marked positions using the provided screws. For inside mounts, ensure the brackets are positioned to allow the shade to fit snugly and minimize light gaps. For outside mounts, position them to provide adequate coverage beyond the window opening.
4. Attach Roller Shade: Carefully align the roller shade with the installed brackets and snap it into place. Ensure it is securely fastened and operates smoothly.
5. Install Handle: Attach the handle to the bottom rail of the shade for easy operation.

Image: Visual comparison demonstrating the reduced light leakage achieved with Boolegon's hidden mounting and baffle design.

5. Operating Instructions

Your Boolegon Blackout Roller Shade features a convenient cordless free-stop system for easy and safe operation:

• To Lower the Shade: Gently pull down on the handle located at the bottom of the shade. The shade will extend downwards.
• To Raise the Shade: Gently push up on the handle. The shade will retract upwards.
• To Stop the Shade: The free-stop system allows the shade to remain in any position you release it. Simply pull or push to the desired height and let go.

Image: Demonstration of the cordless free-stop mechanism, allowing the shade to be positioned effortlessly at any height.

6. Maintenance

To keep your Boolegon Blackout Roller Shades in optimal condition, follow these simple care instructions:

• Spot Clean Only: For any spills or marks, use a soft cloth dampened with mild soap and water to gently spot clean the affected area.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or bleach, as these can damage the fabric and its protective coatings.
• Dust Regularly: Use a soft brush or vacuum with a brush attachment to gently remove dust and debris from the shade fabric.

7. Troubleshooting

If you encounter any issues with your Boolegon Blackout Roller Shades, please refer to the common solutions below. If the problem persists, contact our support team.

Common Issues:

• Light Leakage: While our shades are designed to minimize light leakage with a baffle and hidden mounting, some minimal light may still be visible around the edges, especially with inside mounts. Ensure measurements were precise and installation is flush.
• Shade Not Stopping at Desired Position: The free-stop system is designed to hold the shade in place. If it's not functioning correctly, ensure there are no obstructions in the mechanism or along the fabric path.
• Difficulty Raising/Lowering: Check for any obstructions or debris that might be hindering the smooth movement of the shade. Ensure the handle is properly attached and not damaged.

For further assistance, please refer to the Warranty and Support section.

8. Specifications

9. Warranty and Support

Boolegon is committed to providing high-quality products and excellent customer service.

• Warranty: Your Boolegon Blackout Roller Shades come with a 24-month warranty from the date of purchase. This warranty covers manufacturing defects and product malfunctions under normal use.
• Customer Support: If you experience any issues with your product or have questions regarding installation, operation, or maintenance, please do not hesitate to contact our professional after-sales team. We are dedicated to resolving your concerns efficiently and effectively.