Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your RackChoice 5U Rackmount Server Chassis. Designed for server applications, this chassis offers robust construction and compatibility with various components, including advanced liquid cooling systems.
Please read this manual thoroughly before beginning installation to ensure proper setup and to maximize the performance and longevity of your server chassis.
Image: Front-side view of the RackChoice 5U Rackmount Server Chassis, showcasing its silver color and robust design.
Setup and Installation
Follow these steps for proper installation of components within your server chassis.
1. Motherboard Installation
The chassis supports EATX, ATX, MicroATX, and Mini-ITX motherboards. Carefully align your motherboard with the standoffs and secure it with screws.
2. Power Supply Unit (PSU) Installation
This chassis accommodates one standard PS2 ATX PSU and one SFX PSU. Install the PSUs into their designated bays. Ensure proper cable management for optimal airflow.
Image: Internal view of the chassis highlighting the dedicated space for ATX and SFX power supply units. The ATX PSU space is 220.8mm between the SFX PSU bracket and the rear panel.
3. Drive Bay Configuration
The chassis includes 2 internal 3.5-inch drive bays, with an option for 2 additional 3.5-inch drives. Install your hard drives or SSDs securely into the available bays.
4. Cooling System Setup
The chassis is designed for extensive cooling, including liquid cooling. It supports up to 360mm liquid cooling radiators.
- Front Cooling: Three 120mm fans can be installed at the front for liquid cooling radiators.
- Middle Cooling: Two 120mm fans are pre-installed in the middle section.
- Rear Cooling: Optional installation of one 120mm fan and two 80mm fans at the rear.
Image: Internal view illustrating the liquid cooling compatibility. The chassis supports 2x360mm or 1x360mm + 1x240mm liquid cooling space at the top, and an additional 1x240mm liquid cooling space. Optional 1x120mm + 2x80mm fans can be installed. Note: Motherboard, HDD, PSU, and liquid cooling components are not included with the chassis.
Image: Top-down internal view of the chassis, showing the layout for components and pre-installed middle fans.
Operation
Once all components are installed and secured, connect the necessary power and data cables. The chassis features a front panel with a thermal LCD display.
Front Panel Thermal LCD
The front panel includes a thermal LCD display that provides real-time temperature readings and operational status. This allows for quick monitoring of your system's thermal performance.
Image: Front view of the RackChoice 5U chassis, with a red circle highlighting the thermal LCD display on the front panel, showing temperature (e.g., 30°C) and run time.
Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your server chassis.
- Dust Removal: Periodically clean the interior of the chassis and fan filters to prevent dust buildup, which can impede airflow and lead to overheating. Use compressed air or a soft brush.
- Cable Management: Ensure cables are neatly organized to maintain proper airflow and prevent interference with cooling components.
- Fan Inspection: Check fans regularly for proper operation. Replace any noisy or malfunctioning fans.
- Component Security: Verify that all installed components (motherboard, drives, PSUs) remain securely fastened.
Troubleshooting
This section addresses common issues you might encounter.
- No Power:
- Check all power connections, including the PSU to the wall outlet and internal component power cables.
- Verify that the PSU switch is in the 'ON' position.
- Overheating:
- Ensure all fans are spinning correctly.
- Clean dust from fans and vents.
- Verify proper installation of liquid cooling components if used.
- Check thermal paste application on CPU/GPU.
- Component Not Detected:
- Reseat the component (e.g., RAM, GPU, drive).
- Check data and power cable connections to the component.
- Verify compatibility with your motherboard.
Specifications
| Feature | Detail |
|---|---|
| Brand | rackchoice |
| Model | 5U Rackmount Server Chassis |
| Product Dimensions | 19.68"D x 19"W x 8.75"H (500mm D x 482.6mm W x 222.25mm H) |
| Material | Alloy Steel |
| Item Weight | 15.3 Pounds (6.94 kg) |
| Compatible Devices | Server |
| Motherboard Support | EATX/ATX/MicroATX/Mini-ITX |
| Drive Bays | 2 x 3.5" (internal) + 2 x 3.5" (optional) |
| PSU Support | 1 x Standard PS2 ATX + 1 x SFX |
| Liquid Cooling Radiator Support | Up to 360mm (Front: 3x120mm, Top: 2x360mm or 1x360mm+1x240mm, Internal: 1x240mm) |
| Cooling System (Fans) | 3 x 120mm (front, for liquid), 2 x 120mm (pre-installed in middle), 1 x 120mm & 2 x 80mm (rear, optional) |
| Front Panel Features | Thermal LCD display |
Image: Diagram showing the dimensions of the RackChoice 5U Rackmount Server Chassis: 19 inches (width), 220mm (height), and 500mm (depth).
Warranty and Support
For warranty information and technical support, please refer to the official RackChoice website or contact your point of purchase. Keep your proof of purchase for warranty claims.
No official product videos from the seller were found to be included in this manual.
