1. Introduction
Welcome to the world of personalized coffeehouse beverages at home with your new Keurig K-Café Barista Bar Single Serve Coffee Maker and Frother. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your appliance to ensure optimal performance and enjoyment.
Image 1.1: The Keurig K-Café Barista Bar Coffee Maker and Frother.
2. Safety Information
- Read all instructions before using the appliance.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against fire, electric shock, and injury to persons, do not immerse cord, plugs, or the appliance in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
- The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
- Do not use appliance for other than intended use.
3. What's in the Box
Your Keurig K-Café Barista Bar package includes:
- Keurig K-Café Barista Bar Single Serve Coffee Maker
- Milk Frother
- Removable Drip Tray
- Water Reservoir (42 oz capacity)
- User Manual (this document)
4. Setup
4.1 Initial Setup
- Remove all packing materials from the coffee maker and frother.
- Place the coffee maker upright on a stable, flat surface.
- Plug the coffee maker into a grounded outlet.
4.2 Water Reservoir
The 42oz removable water reservoir allows for multiple brews between refills.
- Remove the water reservoir lid.
- Fill the reservoir with fresh, filtered water up to the MAX fill line.
- Replace the lid, ensuring it is securely seated.
Image 4.1: The 42oz removable water reservoir on the Keurig K-Café Barista Bar.
4.3 Frother Setup
The included milk frother can create hot or cold frothed milk for your beverages.
- Ensure the frother is clean and dry before first use.
- Place the frother on a flat, stable surface near the coffee maker.
- Plug the frother into a separate grounded outlet.
5. Operating Instructions
5.1 Brewing Hot Coffee
- Lift the handle and place a K-Cup pod into the K-Cup pod holder.
- Lower the handle completely to close the lid.
- Place a mug on the drip tray. For larger mugs, the drip tray can be removed.
- Select your desired brew size (8, 10, or 12 oz) from the buttons on the side. The selected button will illuminate.
- The brewer will begin dispensing coffee.
Image 5.1: Brew size selection buttons on the Keurig K-Café Barista Bar.
5.2 Brewing Iced Coffee
The Brew Over Ice feature automatically adjusts the brew temperature for optimal iced coffee flavor.
- Fill a tumbler with ice. Ensure the tumbler is large enough to accommodate the selected brew size.
- Place a K-Cup pod into the K-Cup pod holder and lower the handle.
- Place the tumbler on the drip tray.
- Press the "Brew Over Ice" button (indicated by an ice cube icon). The button will illuminate.
- The brewer will dispense iced coffee.
Image 5.2: The Keurig K-Café Barista Bar supports both hot and iced coffee brewing.
Image 5.3: Close-up of the "Brew Over Ice" button.
5.3 Using the Coffee Shot
The "Shot" button brews a concentrated 2oz coffee shot, ideal for specialty drinks like lattes and cappuccinos.
- Place a K-Cup pod into the K-Cup pod holder and lower the handle.
- Place a small mug or glass on the drip tray.
- Press the "Shot" button. The button will illuminate.
- The brewer will dispense a concentrated coffee shot.
Image 5.4: The "Shot" button for concentrated coffee.
5.4 Using the Milk Frother (Hot & Cold)
The frother allows you to create perfectly frothed milk for hot or cold beverages.
- Pour fresh milk or a dairy alternative (oat, almond, soy) into the frother. Do not exceed the MAX fill line.
- Place the lid securely on the frother.
- To froth hot milk, press the button with the "SSS" (steam) icon. The light will turn red.
- To froth cold milk, press the button with the snowflake icon. The light will turn blue.
- The frother will automatically stop when the frothing cycle is complete.
Image 5.5: Features of the Keurig Milk Frother, including hot and cold frothing.
6. Maintenance and Cleaning
6.1 Cleaning the Brewer
- Drip Tray: The drip tray is removable for easy cleaning. Simply slide it out, empty any liquid, and wash with warm, soapy water. Rinse thoroughly and dry.
- Water Reservoir: The water reservoir can be removed and washed with warm, soapy water. Rinse thoroughly.
- K-Cup Pod Holder: The K-Cup pod holder can be removed for cleaning. Lift the handle, grasp the top of the K-Cup pod holder, and pull up. Wash with warm, soapy water and rinse.
- Exterior: Wipe the exterior of the brewer with a damp cloth.
Image 6.1: The removable drip tray for easy cleaning and accommodating travel mugs.
6.2 Cleaning the Frother
- Unplug the frother before cleaning.
- Remove the lid and the whisk from inside the frother.
- Wash the frother interior, lid, and whisk with warm, soapy water. The interior has a nonstick coating for easy cleaning.
- Rinse thoroughly and dry all parts before reassembling.
6.3 Descaling
Over time, calcium deposits (scale) can build up in your coffee maker. The "Descale" indicator light will illuminate when descaling is required. Follow the descaling instructions provided in the full user manual (PDF) available on the product page or Keurig's official website.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Brewer not turning on | Not plugged in; power outage | Ensure brewer is securely plugged into a grounded outlet. Check circuit breaker. |
| No coffee dispenses | Water reservoir empty; K-Cup pod not properly seated; brew needle clogged | Fill water reservoir. Ensure K-Cup pod is correctly inserted and handle is fully lowered. Clean brew needle. |
| Coffee tastes weak or watery | Incorrect brew size selected; K-Cup pod not suitable for chosen size | Select a smaller brew size. Use a K-Cup pod designed for stronger brews. |
| Frother not frothing milk | Not enough milk; whisk not installed; incorrect milk type | Ensure milk is above MIN line. Check if whisk is properly installed. Use fresh milk or recommended dairy alternative. |
| "Add Water" light on | Water reservoir low or empty | Refill the water reservoir to the MAX fill line. |
8. Specifications
- Brand: Keurig
- Model Name: 5000374606
- Color: Black
- Product Dimensions: 16"D x 16"W x 9"H
- Item Weight: 8.43 pounds
- Water Reservoir Capacity: 42 oz
- Brew Sizes: 8 oz, 10 oz, 12 oz, 2 oz Shot
- Special Features: Brew Over Ice, Hot & Cold Milk Frother, Energy Efficient Auto-Off
- Compatible with: K-Cup Pods, My K-Cup Universal Coffee Filter (sold separately)
Image 8.1: Detailed product dimensions for the Keurig K-Café Barista Bar.
Image 8.2: Dimensions and frothing capabilities of the Keurig Milk Frother.
9. Warranty and Support
For warranty information, product registration, and customer support, please refer to the official Keurig website or the documentation included with your purchase. You may also contact Keurig customer service directly for assistance with your K-Café Barista Bar.