Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Sunco 2x2 LED Flat Panel Light. This fixture is designed for drop ceilings and troffer replacement applications, offering selectable color temperature (CCT) and wattage, along with 0-10V dimming capabilities. Please read these instructions carefully before installation and retain them for future reference.
Safety Information
- Always turn off power at the circuit breaker before beginning installation.
- Consult a qualified electrician if you are not familiar with electrical wiring.
- Ensure all connections are secure and comply with local electrical codes.
- Do not install in wet locations. This product is rated for indoor use only.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create safety hazards.
Setup and Installation
The Sunco 2x2 LED Flat Panel Light is designed for easy installation in standard 2x2 drop ceilings. It supports flush mount and can also be suspended (suspension kit not included) or surface-mounted (surface frame kit not included).
Pre-Installation Steps:
- Unpack the fixture and inspect for any damage.
- Turn off power at the main circuit breaker.
- Remove the existing troffer or ceiling tile from the installation area.
Wiring Instructions:
- The fixture operates on 120-277V AC.
- Connect the black wire from the fixture to the live (L) wire from the power supply.
- Connect the white wire from the fixture to the neutral (N) wire from the power supply.
- Connect the green/yellow wire from the fixture to the ground (G) wire from the power supply.
- For 0-10V dimming, connect the purple wire to the dimming positive (+) and the gray wire to the dimming negative (-). If not using dimming, cap these wires individually.
- Ensure all wire connections are secured with appropriate wire connectors.
Drop Ceiling Installation:
- After wiring, carefully place the LED panel into the ceiling grid opening.
- Secure the panel using the included protective brackets by attaching them to the ceiling grid.
- Ensure the panel is flush and stable within the grid.
Image: A person installing the Sunco 2x2 LED Flat Panel Light into a drop ceiling grid.
Installation Overview Video:
Video: An official overview of the Sunco 2x2 Dual Selectable Ceiling Panel, demonstrating its features and installation process.
Operating Instructions
Your Sunco LED Flat Panel Light offers adjustable settings for both color temperature and brightness to suit various environments and preferences.
Selectable Color Temperature (CCT):
The fixture features a slider switch on the back to select between three color temperatures: 4000K (Cool White), 5000K (Daylight), and 6000K (Daylight Deluxe). Adjust this switch before final installation or by carefully accessing the back of the panel if already installed.
Image: A close-up view of the selector switches for color temperature and wattage located on the back of the panel.
Selectable Wattage (Brightness):
Another slider switch on the back allows you to choose between three wattage options: 30W (4200 Lumens), 35W (4700 Lumens), and 40W (5200 Lumens). This adjusts the brightness of the light. Select your desired wattage before installation or by accessing the back of the panel.
0-10V Dimming:
The panel is compatible with 0-10V dimmers, allowing for smooth brightness adjustment from 100% down to 10%. Ensure proper wiring to a compatible 0-10V dimmer switch for this functionality.
Maintenance
The Sunco 2x2 LED Flat Panel Light is designed for minimal maintenance with a long lifespan of 50,000 hours.
- Cleaning: To clean the fixture, ensure power is off. Use a soft, dry, or slightly damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or diffuser.
- Dustproof Sealing: The panel features dustproof sealing to reduce the need for frequent cleaning and maintain optimal light output.
- LED Longevity: The integrated anti-aging LEDs are designed for extended performance, eliminating the need for bulb replacements.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture; Loose wiring; Faulty switch/breaker | Check circuit breaker; Verify all wire connections; Test switch/breaker. |
| Light flickers | Loose wiring; Incompatible dimmer; Power fluctuations | Check wiring connections; Ensure 0-10V dimmer compatibility; Consult electrician for power issues. |
| Incorrect color temperature or brightness | CCT/Wattage selector switches set incorrectly | Adjust the CCT and/or wattage selector switches on the back of the panel to desired setting. |
| Dimming not working | Incorrect dimmer wiring; Incompatible dimmer | Verify 0-10V dimming wire connections (purple/gray); Ensure dimmer is 0-10V compatible. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | PN22_DU-WH-4060K |
| Dimensions | 23.7"L x 23.7"W x 1.46"H |
| Wattage | Selectable: 30W / 35W / 40W |
| Brightness (Lumens) | Up to 5200 LM (at 40W) |
| Color Temperature (CCT) | Selectable: 4000K / 5000K / 6000K |
| Voltage | 120-277V AC |
| Dimming | 0-10V Dimmable |
| Material | SPCC, Polycarbonate Shade |
| Lifespan | 50,000 hours |
| Installation Type | Flush Mount (Recessed), Suspension Mount (kit not included), Surface Mount (kit not included) |
| Certifications | ETL, DLC |
| Included Components | Protective Brackets |
Warranty and Support
Sunco Lighting stands behind the quality of its products.
- Warranty: This product is covered by a 7-Year Warranty. Please retain your proof of purchase for warranty claims.
- Customer Support: For any questions, technical assistance, or warranty inquiries, please contact our USA-based support specialists. Visit the official Sunco Lighting store for contact information or additional resources.
For more information, visit the Sunco Lighting Store.
