1. Introduction
Thank you for choosing the Kobi Fala Children's Bed. This manual provides essential information for the safe assembly, use, and maintenance of your new children's bed. Please read these instructions carefully before assembly and retain them for future reference.
Image 1.1: The Kobi Fala Children's Bed with its integrated drawer and mattress.
2. Safety Information
- Weight Capacity: The bed is designed to support a maximum weight of 110 kg. Do not exceed this limit.
- Fall Prevention: The bed features appropriately high sides to help prevent accidental falls, providing additional security for your child.
- Rounded Edges: All edges are rounded and protected with a PVC border to minimize the risk of injury.
- Assembly: Ensure all components are correctly assembled and tightened according to the provided assembly guide to maintain structural integrity and safety. Regularly check all screws and fittings to ensure they remain secure.
- Supervision: Always supervise young children when they are using the bed, especially during initial use.
- Ventilation: Ensure adequate ventilation around the mattress.
Image 2.1: Close-up view highlighting the rounded edges, mattress, and bed slats for safety and comfort.
3. Package Contents
Upon unpacking, please verify that all the following components are present and undamaged. If any parts are missing or damaged, contact customer support immediately.
- Bed frame components (headboard, footboard, side rails)
- Bed slats (slatted base)
- Pull-out storage drawer components
- 7 cm thick mattress
- Hardware pack (screws, dowels, connectors)
- Assembly instructions (separate document)
Image 3.1: Example of the bed slats included for mattress support.
Image 3.2: The included 7 cm thick mattress.
4. Assembly Instructions (Setup)
Assembly of the Kobi Fala Children's Bed is required. Please follow the detailed step-by-step instructions provided in the separate assembly guide included with your package. It is recommended to have two adults for assembly.
- Preparation: Clear a spacious area for assembly. Lay out all components and hardware. Ensure you have the necessary tools (e.g., screwdriver).
- Frame Assembly: Begin by assembling the main bed frame, connecting the headboard, footboard, and side rails. Ensure all connections are secure.
- Drawer Assembly: Assemble the pull-out drawer according to its specific instructions. The drawer can be mounted on either the right or left side of the bed, offering flexibility in room design.
- Slatted Base Installation: Carefully place and secure the bed slats onto the designated supports within the bed frame.
- Mattress Placement: Once the frame and slats are secure, place the mattress onto the slatted base.
- Final Check: Before use, double-check all screws and fittings to ensure they are tight and secure.
Note: If you encounter difficulties during assembly, refer to the specific assembly manual or contact customer support.
5. Usage (Operating)
The Kobi Fala Children's Bed is designed for comfortable and safe sleep for children. The integrated pull-out drawer provides convenient storage for bedding, toys, or other items, helping to keep the room tidy.
- Sleeping Area: The bed provides a secure and comfortable sleeping environment.
- Storage Drawer: The spacious drawer slides smoothly for easy access to stored items. Ensure the drawer is fully closed when not in use to prevent tripping hazards.
- Side Rails: The bed's side rails offer protection against accidental falls during sleep.
Image 5.1: The Kobi Fala bed in a room setting, demonstrating the integrated storage drawer.
6. Maintenance and Care
Proper care will extend the life and appearance of your Kobi Fala Children's Bed.
- Cleaning the Frame: Wipe the wooden frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Mattress Care: The mattress cover is typically removable and washable. Wash at 30°C (86°F) as indicated by the care symbols. Allow to air dry completely before re-covering.
- Regular Checks: Periodically inspect all screws, bolts, and fittings to ensure they are tight. Re-tighten if necessary.
- Avoid Moisture: Protect the bed from excessive moisture and direct sunlight to prevent warping or discoloration.
Image 6.1: A child sleeping on the mattress, with icons indicating mattress care instructions, including washing at 30°C.
7. Troubleshooting
If you encounter any issues with your Kobi Fala Children's Bed, refer to the following common solutions:
- Bed feels wobbly: Check all assembly screws and bolts. Tighten any loose connections. Ensure the bed is on a flat, even surface.
- Drawer not sliding smoothly: Inspect the drawer runners for any obstructions or debris. Ensure the drawer components are correctly assembled and aligned.
- Squeaking noises: This can often be resolved by re-tightening all hardware. If the issue persists, disassemble and reassemble the affected section, ensuring all parts are correctly seated.
- Damaged parts: If any part is damaged during shipping or assembly, do not attempt to force it. Contact customer support for replacement parts.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | KOBI |
| Model Number | FALA BAR+SZU 160x80 Amazon |
| Material | Wood |
| Color | White |
| Overall Dimensions (L x W x H) | 164 x 85 x 63 cm |
| Mattress Size (L x W) | 160 x 80 cm |
| Mattress Thickness | 7 cm |
| Number of Drawers | 1 |
| Maximum Weight Capacity | 110 kg |
| Item Weight | 45 kg |
| Assembly Required | Yes |
Image 8.1: Detailed dimensions diagram of the Kobi Fala Children's Bed.
9. Warranty and Support
Information regarding specific warranty terms and customer support contact details is not available in the provided product data. Please refer to the documentation included with your purchase or contact the retailer for warranty claims and technical assistance.
For general inquiries or assistance, you may also visit the official KOBI website or contact their customer service department.
Manufacturer: KOBI
