Wostore RME002

Download PDF
Contents

Universal AC Remote Control Instruction Manual

Model: RME002 | Brand: Wostore

Introduction

This manual provides comprehensive instructions for the Wostore Universal AC Remote Control (Model RME002). This versatile remote is designed to operate a wide range of air conditioning units, offering 6000-in-1 compatibility. It features an intuitive LCD display and controls for various functions, serving as an ideal replacement for lost or broken AC remotes.

Front and side view of the Wostore Universal AC Remote Control

Figure 1: Wostore Universal AC Remote Control (Model RME002)

Image showing a pile of multiple remote controls contrasted with a single universal remote, highlighting the convenience of one remote.

Figure 2: The universal remote simplifies control by replacing multiple dedicated remotes.

Setup

1. Battery Installation

Open the battery cover on the back of the remote control. Insert two AAA batteries, ensuring correct polarity (+/-). Close the battery cover securely.

Back view of the remote control with the battery compartment open, showing where to insert two AAA batteries.

Figure 3: Battery compartment for two AAA batteries.

2. Code Setting for Your AC Unit

The remote control requires a specific code to operate your air conditioning unit. There are two primary methods for setting the code:

Method A: Manual Code Input

  1. Identify your AC unit's brand from the provided code list.
  2. Press and hold the SELECT button for approximately 5 seconds until the code digits on the LCD display start flashing.
  3. Input the 3-digit code corresponding to your AC brand using the number buttons (0-9).
  4. Press the OK button to confirm the code. The code digits will stop flashing.
  5. Test the remote by pressing the POWER button. If the AC unit responds, the setup is complete. If not, repeat the process with the next code for your brand, or try Method B.
  1. Ensure your AC unit is powered on.
  2. Press and hold the SELECT button for approximately 5 seconds until the code digits on the LCD display start flashing. The remote will begin automatically searching for the correct code, indicated by the code digits changing rapidly.
  3. Point the remote at your AC unit. When the AC unit responds (e.g., turns on, beeps), immediately press the OK button to confirm the code.
  4. Test all functions of the remote (temperature, mode, fan speed) to ensure full compatibility. If some functions do not work, repeat the auto-search process to find an alternative compatible code.

Compatible Brands List

Refer to the following images for a comprehensive list of compatible AC brands and their corresponding codes. This list covers a wide range of manufacturers, ensuring broad compatibility for your universal remote.

Part 1 of the compatible brands list for the universal AC remote, showing various brands and their corresponding numerical codes.

Figure 4: Compatible Brands List (Part 1)

Part 2 of the compatible brands list for the universal AC remote, showing additional brands and their numerical codes.

Figure 5: Compatible Brands List (Part 2)

Operating Instructions

The Wostore Universal AC Remote Control features a clear LCD display and well-labeled buttons for easy operation. Below are the functions of the main buttons:

Close-up view of the universal AC remote control with labels pointing to the screen display, temperature regulation buttons, power button, timer button, and mode button.

Figure 6: Key functions of the remote control.

  • POWER: Turns the AC unit on or off.
  • TEMP+ / TEMP-: Adjusts the temperature up or down.
  • Q.COOL / Q.HEAT: Quick cool or quick heat functions for rapid temperature change.
  • MODE: Cycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
  • FAN: Adjusts fan speed (e.g., Auto, Low, Medium, High).
  • SWING: Controls the louver swing direction for optimal air distribution.
  • TIMER ON / TIMER OFF: Sets a timer for the AC unit to turn on or off automatically.
  • SELECT: Used during code setting to initiate the search or input process.
  • AUH: Auxiliary function, specific use may vary by AC model.
  • OK: Confirms selections or code inputs.

Temperature Unit Conversion

To switch between Celsius (°C) and Fahrenheit (°F) temperature displays, press the TEMP+ and TEMP- buttons simultaneously.

Timer Function

The remote allows you to set a timer for automatic power on or off. Press the TIMER ON or TIMER OFF button, then use the temperature buttons to adjust the desired time. Press OK to confirm. The timer can be set for up to 12 hours.

Image showing the remote control in use with a person relaxing, highlighting the timing switch feature for energy consumption reduction.

Figure 7: Utilizing the timer function for convenience and energy saving.

Maintenance

Battery Replacement

When the remote's display becomes dim or the remote stops responding, it's time to replace the batteries. Always replace both AAA batteries at the same time with new ones. Do not mix old and new batteries, or different types of batteries.

Cleaning

Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners, aerosols, or harsh chemicals, as these can damage the remote's surface or internal components.

Storage

If the remote will not be used for an extended period, remove the batteries to prevent leakage and corrosion. Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

  • Remote not responding:
    • Check if batteries are installed correctly and have sufficient power. Replace if necessary.
    • Ensure the remote is pointed directly at the AC unit's infrared receiver.
    • Verify that the correct code for your AC unit has been successfully set. Try re-entering the code or using the automatic code search function.
  • Some functions do not work:
    • Not all AC units support every function available on the universal remote. This is common with universal remotes.
    • Try using the automatic code search again to find a more compatible code for your specific AC model. Different codes for the same brand might offer varying levels of functionality.
  • Short operating distance:
    • Ensure there are no obstructions between the remote and the AC unit.
    • Replace the batteries with new ones.

Specifications

BrandWostore
Model NumberRME002
Compatible DevicesAir Conditioner
Max Number of Supported Devices1
ColorWHITE
Special FeatureUniversal
Batteries RequiredYes (2 AAA batteries)
Item Weight2.88 ounces
Package Dimensions8.62 x 4.41 x 1.1 inches
Country of OriginChina

Warranty and Support

Specific warranty information for the Wostore Universal AC Remote Control (Model RME002) is not provided in this manual. For warranty details, technical support, or further assistance, please refer to the product packaging or contact Wostore customer service directly through their official website or the retailer where the product was purchased.

© 2025 Wostore. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.