1. Introduction
Thank you for choosing the IKT X08 Wireless Bluetooth Earbuds. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your earbuds to ensure optimal performance and longevity. Please read this manual carefully before using the product.
2. Safety Information
To ensure safe and proper use of your IKT X08 earbuds, please observe the following precautions:
- Do not expose the earbuds or charging case to extreme temperatures, direct sunlight, or high humidity.
- Avoid dropping, hitting, or disassembling the device. Unauthorized repairs will void the warranty.
- The earbuds are IP7 waterproof, meaning they are resistant to sweat and rain. Do not submerge them in water or expose them to strong jets of water.
- Keep out of reach of children and pets.
- Use only the provided charging cable or a certified USB-C cable for charging.
- Prolonged listening at high volume levels may cause hearing damage. Adjust the volume to a safe and comfortable level.
3. Product Overview
The IKT X08 Wireless Bluetooth Earbuds offer a superior audio experience with advanced features. The package includes two earbuds and a portable charging case.
Figure 3.1: IKT X08 Wireless Bluetooth Earbuds and Charging Case.
Key Features:
- LED Display Charging Case: The charging case features a dual LED display that accurately shows the battery level of both the case and each earbud.
- Extended Playtime: Enjoy up to 8 hours of single earbud playtime, with an additional 50 hours provided by the charging case, totaling 58 hours of use.
- Enhanced Bass: Equipped with a 14.2mm graphene diaphragm, delivering 85% more powerful bass for a rich audio experience.
- ENC Noise Reduction: Features dual hybrid ENC microphones that passively cancel up to 90% of background noise for crystal-clear calls.
- Comfortable & Durable Design: Ergonomically designed for a comfortable fit that adapts to 99% of ear canals, dispersing 45% of pressure. IP7 water resistance protects against sweat and rain.
- Advanced Bluetooth 5.3: Provides a 200% more stable connection than Bluetooth 5.0, ensuring low latency and stable calls.
- Smart Touch Control: Intuitive touch controls allow easy management of calls, music, and voice assistants without needing to access your phone.
- Wide Compatibility: Easily pairs with a variety of Bluetooth-enabled devices, including iOS/Android smartphones, tablets, and laptops.
4. Setup
4.1 Charging the Earbuds and Case
Before first use, ensure both the earbuds and the charging case are fully charged.
- Place the earbuds into the charging case.
- Connect the USB-C charging cable to the charging port on the case and plug the other end into a USB power adapter (not included).
- The LED display on the charging case will show the battery percentage of the case and individual earbud charging status.
- A full charge typically takes approximately 2 hours.
Figure 4.1: Charging case displaying battery levels. The case provides 50 hours of additional use, with each earbud offering 8 hours on a single charge.
4.2 Pairing with Your Device
The IKT X08 earbuds feature one-step pairing for convenience.
- Initial Pairing: Open the charging case. The earbuds will automatically enter pairing mode.
- On your device (smartphone, tablet, laptop), go to Bluetooth settings and turn Bluetooth on.
- Look for "X08" in the list of available devices and select it to connect.
- Once connected, the earbuds will automatically pair with your device whenever you take them out of the charging case.
Figure 4.2: Bluetooth 5.3 provides a stable and quick pairing experience. After initial connection, earbuds automatically connect to your device.
5. Operating the Earbuds
5.1 Wearing the Earbuds
For optimal sound quality and comfort, ensure the earbuds are properly seated in your ears. The package includes different sizes of silicone ear tips to find your best fit.
Figure 5.1: The IKT X08 earbuds are super lightweight (3.8g) and designed for comfortable wear, with included silicone ear tips for a secure fit.
5.2 Smart Touch Controls
The IKT X08 earbuds feature intuitive touch controls on each earbud (L for Left, R for Right). Refer to the table below for common functions:
Figure 5.2: Smart Touch Control functions for calls, music, and voice assistant.
| Action | Function | Earbud (L/R) |
|---|---|---|
| 2 Clicks | Answer/End Call | L/R |
| Long Press 2s | Reject Call | L/R |
| 3 Clicks | Activate Voice Assistant (Siri) | L/R |
| 1 Click | Volume Up (+) / Volume Down (-) | L/R (specific earbud for each) |
| 2 Clicks | Play/Pause Music | L/R |
| Long Press 2s | Next Track / Previous Track | L/R (specific earbud for each) |
| Long Press 5s | Power On/Off | L/R |
6. Maintenance
Proper maintenance will extend the life of your earbuds and ensure consistent performance.
- Cleaning: Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth. Do not use abrasive cleaners, alcohol, or chemical solvents.
- Ear Tips: Remove the silicone ear tips and clean them with mild soap and water. Ensure they are completely dry before reattaching them to the earbuds.
- Charging Contacts: If charging issues occur, gently clean the charging contacts on both the earbuds and inside the case with a dry cotton swab.
- Storage: When not in use, store the earbuds in their charging case to protect them from dust and damage. Store in a cool, dry place.
- Water Resistance: While IP7 waterproof, avoid exposing the earbuds to saltwater, chlorinated water, or other liquids that may contain chemicals. If they get wet, wipe them dry immediately.
7. Troubleshooting
If you encounter any issues with your IKT X08 earbuds, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Earbuds not pairing with device | Bluetooth off, earbuds not in pairing mode, device already connected to another Bluetooth device. | Ensure Bluetooth is on. Place earbuds in case, close, then open to re-enter pairing mode. Disconnect from other devices. |
| No sound from earbuds | Volume too low, earbuds not connected, media paused. | Increase volume on both earbuds and device. Check Bluetooth connection. Play media. |
| One earbud has no sound | Earbuds not properly synced, low battery. | Place both earbuds back in the charging case, close the lid, wait a few seconds, then take them out again. Ensure both are charged. |
| Charging case not charging | Faulty cable/adapter, dirty charging port. | Try a different USB-C cable and power adapter. Clean the charging port on the case. |
| Poor call quality / Noise during calls | Weak signal, environmental noise, microphone obstruction. | Move closer to your device. Ensure microphone is not covered. The ENC feature reduces background noise. |
| Touch controls not responding | Incorrect touch gesture, temporary software glitch. | Refer to the touch control table. Place earbuds back in case and take them out to reset. |
If the problem persists after trying these solutions, please contact IKT customer support for further assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Model | X08 |
| Connectivity Technology | Wireless, Bluetooth 5.3 |
| Material | Plastic |
| Charging Time | Approx. 2 Hours |
| Water Resistance Level | IP7 (Waterproof) |
| Frequency Range | 20-20000 Hz |
| Impedance | 32 Ohm |
| Sensitivity | 108 dB |
| Single Earbud Playtime | 8 Hours |
| Total Playtime (with case) | Up to 58 Hours |
| Dimensions (Product) | 6.2 x 5.1 x 2 cm |
| Weight (Product) | 40 g |
| Control Type | Touch Control |
| Compatible Devices | Cell phones, Tablets, Laptops |
9. Warranty and Support
IKT provides effective after-sales support and a two-year warranty for the X08 Wireless Bluetooth Earbuds. This warranty covers manufacturing defects and ensures peace of mind for your purchase.
For warranty claims, technical assistance, or any other inquiries, please contact IKT customer support through the retailer where you purchased the product or visit the official IKT website for contact information.
Please retain your proof of purchase for warranty validation.
