1. Introduction
The Katusie Aromatherapy Essential Oil Diffuser (Model AD-01) is designed to enhance your home environment with soothing aromas and captivating light effects. Utilizing ultrasonic high-frequency oscillation technology, it atomizes water and essential oils into a fine mist, quickly diffusing fragrance throughout your space. Featuring a 200ml capacity for up to 12 hours of continuous operation, touch button controls, 17 RGB ambient light modes, and a simulated flame effect, this diffuser offers a blend of functionality and aesthetic appeal for large rooms.
2. Important Safety Information
- Avoid direct skin contact with undiluted essential oils.
- Keep out of reach of children and pets.
- Ensure proper ventilation during use.
- Do not exceed the maximum water fill line (200ml).
- Use only clean tap water or distilled water.
- Do not tilt or move the diffuser when it is operating or contains water.
- Unplug the device before cleaning or refilling.
3. Package Contents
Please check the box for the following items:
- Katusie Aromatherapy Essential Oil Diffuser Unit (Model AD-01)
- Power Adapter
- User Manual
4. Product Overview
Familiarize yourself with the components of your Katusie Essential Oil Diffuser:
5. Setup Guide
Follow these steps to set up your Katusie Essential Oil Diffuser:
- Remove the aroma diffuser from its packaging.
- Clean the device with a damp cloth if necessary.
- Fill the water reservoir up to the maximum mark (200ml).
- Add essential oils of your choice to the water (2-3 drops recommended, adjust to preference).
- Place the top cover back securely.
- Plug the power adapter into the diffuser's power input, then into a standard electrical outlet.
6. Operating Instructions
The Katusie diffuser features intuitive touch controls for mist and light functions.
Mist Control:
Use the mist touch button (often indicated by a cloud icon) to cycle through timing modes:
- ON: Continuous mist until water runs out or manually turned off.
- 30s intermittent: Mist on for 30 seconds, then off for 30 seconds, repeating.
- 2H: Automatic shut-off after 2 hours.
- 4H: Automatic shut-off after 4 hours.
Light Control:
Use the light touch button (often indicated by a light bulb icon) to adjust the lighting effects. The diffuser offers 17 kinds of lighting effects, including a warm-color simulated flame and various cool colorful neon colors.
- Press once to turn on the flame effect.
- Subsequent presses will cycle through the 17 different color modes (monochrome and colorful).
- Press and hold to turn off the light.
Demonstration Videos:
7. Maintenance
Regular cleaning ensures optimal performance and extends the lifespan of your diffuser.
Daily Maintenance:
- Empty any remaining water from the reservoir after each use.
- Wipe the inside of the water tank with a clean, soft cloth.
Weekly Cleaning:
- Unplug the diffuser and remove the top cover.
- Drain any water from the reservoir.
- Add a small amount of white vinegar (about 1 tablespoon) to the water tank and let it sit for 5-10 minutes to dissolve mineral buildup.
- Gently wipe the ultrasonic disc (the small ceramic plate at the bottom of the tank) with a cotton swab dipped in vinegar. Do not scrub or use abrasive materials.
- Rinse the tank thoroughly with clean water, ensuring no vinegar residue remains. Avoid getting water into the air outlet.
- Wipe the exterior with a soft, dry cloth.
- Allow all parts to air dry completely before reassembling or storing.
8. Troubleshooting
If you encounter issues with your diffuser, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No mist or weak mist | Insufficient water; water level too high; ultrasonic disc dirty; air outlet blocked. | Add water to the appropriate level; ensure water is below max line; clean the ultrasonic disc; check for obstructions in the air outlet. |
| No power | Power adapter not connected; power outlet faulty; diffuser not turned on. | Ensure power adapter is securely plugged in; try a different outlet; press the power button. |
| Loud noise or rattling | Diffuser not on a flat surface; internal component loose; fan obstruction. | Place the diffuser on a stable, flat surface; if noise persists, contact customer support. |
| Water leakage | Overfilled water tank; lid not properly sealed; diffuser tilted. | Do not exceed max fill line; ensure lid is securely closed; keep diffuser upright during operation. |
9. Specifications
| Brand | Katusie |
| Model Name | AD-01 |
| Color | 200ml White |
| Capacity | 200 Milliliters |
| Product Dimensions | 9.8"L x 2.7"W x 3.3"H |
| Item Weight | 1.32 pounds (21.2 Ounces) |
| Material | Polypropylene (PP) |
| Power Source | Corded Electric |
| Wattage | 8.5 Watt-hours |
| Runtime | 12 hours |
| Coverage Area | Up to 400 square feet |
| Light Source Type | LED (17 modes) |
| Special Feature | Auto power off when water runs out |
| Recommended Uses | Office, Home |
10. Warranty and Support
Katusie products are manufactured to the highest quality standards. For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Katusie website. Please retain your proof of purchase for any warranty claims.
