Beats MT293LL/A
Beats Solo3 Wireless On-Ear Headphones
User Manual
Model: MT293LL/A | Brand: Beats
Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Beats Solo3 Wireless On-Ear Headphones. Please read this manual carefully to ensure proper use and to maximize the performance and longevity of your device.
Image: Beats Solo3 Wireless On-Ear Headphones in Silver, showcasing their sleek design.
What's in the Box
Your Beats Solo3 Wireless On-Ear Headphones package includes the following items:
- Beats Solo3 Headphones
- Protective Case
- 3.5mm RemoteTalk Cable
- Universal USB charging cable (USB-A to USB Micro-B)
- Quick Start Guide
- Warranty Card
Setup
1. Charging Your Headphones
Before first use, fully charge your Beats Solo3 headphones. Use the included universal USB charging cable (USB-A to USB Micro-B) to connect your headphones to a USB power source. A full charge provides up to 40 hours of listening time. The Fast Fuel feature allows 5 minutes of charging to provide 3 hours of playback when the battery is low.
Image: Illustration highlighting the 40-hour battery life of the Beats Solo3 headphones.
2. Pairing with Your Device
The Beats Solo3 headphones feature the Apple W1 chip for seamless pairing with Apple devices and Class 1 Bluetooth for compatibility with Android and other Bluetooth-enabled devices.
- For iOS Devices: Power on your headphones. Hold them near your unlocked iOS device. Follow the on-screen prompts to connect.
- For Android & Other Devices: Power on your headphones. Press and hold the power button for 5 seconds until the LED indicator flashes. Go to your device's Bluetooth settings and select "Beats Solo3" from the list of available devices.
Image: Beats Solo3 headphones resting on books, emphasizing their compatibility with both iOS and Android devices, powered by the Apple W1 chip.
3. Adjusting the Fit
Adjust the headband to ensure the ear cups sit comfortably and securely over your ears. The adjustable fit and comfort-cushioned ear cups are designed for extended use.
Operating Your Headphones
On-Ear Controls
The multifunction on-ear controls allow you to manage calls, control music playback, and activate voice assistants.
Image: Detailed view of the right ear cup, showing the intuitive on-device controls for media management and calls.
- Volume Control: Use the volume up/down buttons located on the ear cup.
- Play/Pause: Press the 'b' button once.
- Skip Track: Press the 'b' button twice to skip forward, three times to skip backward.
- Answer/End Call: Press the 'b' button once.
- Activate Voice Assistant (Siri/Google Assistant): Press and hold the 'b' button.
Spatial Audio
Experience immersive sound with Personalized Spatial Audio. This feature requires compatible hardware and software and works with compatible content in supported apps. Not all content is available in Dolby Atmos.
Image: Visual representation of Personalized Spatial Audio, showing sound waves emanating from the headphones.
Maintenance
Cleaning
To maintain the condition of your headphones, regularly wipe them with a soft, dry, lint-free cloth. Avoid using abrasive materials or chemical cleaners. Do not submerge the headphones in water as they are not water resistant.
Storage
When not in use, store your Beats Solo3 headphones in the included protective carrying case. The sleek, streamlined design allows them to be folded for compact storage and portability.
Image: The Beats Solo3 headphones shown in their compact, folded position, ideal for storage and travel.
Troubleshooting
If you encounter issues with your Beats Solo3 headphones, refer to the common problems and solutions below:
| Problem | Solution |
|---|---|
| Headphones not powering on | Ensure the headphones are fully charged. Connect them to a power source using the USB charging cable. |
| Cannot pair with device | Make sure Bluetooth is enabled on your device. Ensure headphones are in pairing mode (flashing LED). Move headphones closer to the device. Forget the device in Bluetooth settings and try pairing again. |
| No sound or low volume | Check volume levels on both headphones and the connected device. Ensure headphones are properly paired. Try playing different audio sources. |
| Intermittent connection | Move closer to the connected device. Avoid sources of strong electromagnetic interference. Ensure headphones are fully charged. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Beats Solo3 |
| Connectivity Technology | Bluetooth |
| Wireless Communication Technology | Bluetooth |
| Battery Life | Up to 40 Hours |
| Charging | Fast Fuel (5 min charge = 3 hrs playback) |
| Headphones Jack | 3.5 mm Jack (for wired use) |
| Compatible Devices | iOS, Android, Desktops, Gaming Consoles, Laptops |
| Control Type | Media Control, Touch |
| Special Features | Apple W1 chip, Microphone Included, Foldable Design, Spatial Audio support |
| Ear Placement | On Ear |
| Noise Control | Sound Isolation |
| Material | Plastic |
| Product Dimensions | 5.16 x 3.74 x 7.44 inches |
| Item Weight | 1.19 pounds |
| Manufacturer | Apple |
Warranty and Support
Your Beats Solo3 Wireless On-Ear Headphones come with a limited warranty. Please refer to the included Warranty Card for detailed terms and conditions, including coverage period and how to make a claim.
For further assistance, technical support, or service inquiries, please visit the official Beats support website or contact their customer service. Keep your proof of purchase for warranty validation.
Related documentsMT293LL/A
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.