Introduction
The AEG Jumpstarter JS15 is a versatile portable power station designed to provide emergency jump-starting for vehicles, act as a power bank for mobile devices, and offer illumination with its integrated LED lamp. This manual provides essential information for the safe and effective use of your device.
It is capable of delivering 400 A starting current and a peak current of 1500 A for 3 seconds, suitable for gasoline engines up to 4.0 L and diesel engines up to 2.0 L. The internal Li-ion battery has a capacity of 44.4 Wh (3 x 4000 mAh) and supports up to 1,000 charge cycles.
Safety Instructions
Read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Do not expose the jump starter to rain or wet conditions. Water entering the device will increase the risk of electric shock.
- Do not use the jump starter if it is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
- Do not short-circuit the battery clamps. Ensure positive (+) and negative (-) clamps do not touch each other or the same metal object.
- Always connect the red (+) clamp to the positive (+) terminal of the vehicle battery and the black (-) clamp to a metal part of the vehicle chassis away from the battery.
- Wear eye protection and protective clothing when working with vehicle batteries.
- Keep out of reach of children.
- Do not attempt to jump start a frozen battery.
- Ensure the vehicle is in park (P) or neutral (N) and the parking brake is engaged before attempting to jump start.
- Disconnect the jump starter from the vehicle battery within 30 seconds after the vehicle starts.
Package Contents
Verify that all items are present in your package:
- AEG Jumpstarter JS15 unit
- Jump starter cables with clamps
- USB charging cable
- Storage bag
- User Manual (this document)
Image: The AEG Jumpstarter JS15 alongside its included storage bag, emphasizing portability and protection.
Product Overview
Familiarize yourself with the components of the AEG Jumpstarter JS15.
Image: AEG Jumpstarter JS15 front view, highlighting 12V vehicle voltage, 400A starting current, and 1500A peak power (3s.
Image: Close-up view of the AEG Jumpstarter JS15, showing its compact form factor and integrated LED light.
Image: Detail of the AEG Jumpstarter JS15's battery connection ports, protected by a cover.
Charging the Jump Starter
Before first use, fully charge the AEG Jumpstarter JS15. It takes approximately 6 to 9 hours to fully charge from empty when charging via USB with 2A.
- Connect the provided USB charging cable to the jump starter's input port.
- Connect the other end of the USB cable to a suitable USB power source (e.g., car charger, wall adapter, computer USB port).
- The display will indicate the charging status. Ensure the device is fully charged before storing or using for jump-starting.
Image: AEG Jumpstarter JS15 being charged via USB, car, or wall socket, also featuring a 70 lumen LED light and including a storage bag.
Setup: Connecting to Vehicle for Jump Start
Follow these steps to safely connect the jump starter to a vehicle battery:
- Ensure the jump starter is fully charged.
- Turn off the vehicle's ignition and all accessories (lights, radio, etc.).
- Connect the red (+) clamp to the positive (+) terminal of the vehicle's battery.
- Connect the black (-) clamp to a solid, unpainted metal part of the vehicle's chassis, away from the battery and fuel lines. Do not connect it directly to the negative terminal of the battery unless specified by the vehicle manufacturer.
- Ensure both clamps have a secure connection.
Image: AEG Jumpstarter JS15 showing direct battery connection clamps, suitable for gasoline engines up to 4.0L and diesel engines up to 2.0L.
Operating: Jump Starting a Vehicle
Once the jump starter is correctly connected to the vehicle battery:
- Turn on the AEG Jumpstarter JS15. The display will show the battery status.
- Attempt to start the vehicle's engine. If the vehicle does not start immediately, wait at least 30 seconds before trying again. Do not crank the engine for more than 3 seconds per attempt.
- Once the vehicle starts, immediately disconnect the black (-) clamp from the vehicle chassis, then disconnect the red (+) clamp from the vehicle battery.
- Allow the vehicle's engine to run for a few minutes to recharge its battery.
The AEG Jumpstarter JS15 is compatible with 12V vehicle systems.
Image: AEG Jumpstarter JS15 used in various vehicle types including cars, vans, motorcycles, quads, boats, and scooters.
Using as a Power Bank (USB & Wireless Charging)
The AEG Jumpstarter JS15 can also charge your mobile devices.
USB Charging:
- Connect your device's USB charging cable to the USB output port on the jump starter.
- The jump starter will automatically begin charging your device.
Wireless Charging:
- Place your Qi-compatible smartphone or other device on the wireless charging pad located on the top surface of the jump starter.
- Ensure the device is centered on the pad for optimal charging. The jump starter provides up to 10W wireless charging.
Image: AEG Jumpstarter JS15 functioning as a power bank, charging a smartphone and camera, highlighting 44.4 Wh battery capacity, USB and wireless charging up to 10W, and Li-ion battery with up to 1,000 charge cycles.
Using the LED Lamp
The integrated LED lamp provides 70 lumens of illumination for various situations.
- To turn on the LED lamp, press the dedicated light button (refer to product overview for location).
- Press the button again to cycle through different light modes (e.g., steady on, strobe, SOS, if available) or to turn it off.
Image: The bright 70 lumen LED lamp of the AEG Jumpstarter JS15 illuminated.
Maintenance
Proper maintenance ensures the longevity and performance of your jump starter.
- Charging: Recharge the jump starter every 3-6 months, even if not used, to maintain battery health. Store it with at least 50% charge.
- Cleaning: Wipe the unit with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the jump starter in its protective bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Life: The high-quality lithium-ion battery is designed for up to 1,000 charge cycles.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Jump starter does not turn on. | Battery is completely discharged. | Charge the jump starter fully. |
| Vehicle does not start. | Incorrect connection; vehicle battery too deeply discharged; vehicle issue not related to battery. | Check clamp connections (positive to positive, negative to chassis). Ensure jump starter is fully charged. Consult a mechanic if the issue persists. |
| Wireless charging not working. | Device not Qi-compatible; device not properly aligned; jump starter battery low. | Ensure your device supports Qi wireless charging. Reposition the device on the charging pad. Charge the jump starter. |
| LED lamp not working. | Jump starter battery low; lamp malfunction. | Charge the jump starter. If the problem persists, contact customer support. |
Specifications
| Feature | Value |
|---|---|
| Model | JS15 |
| Manufacturer Part Number | 10736 |
| Battery Type | Lithium-ion |
| Battery Capacity | 44.4 Wh (3 x 4000 mAh) |
| Starting Current | 400 A |
| Peak Current | 1500 A (for 3 seconds) |
| Output Voltage | 12 V |
| Engine Compatibility (Gasoline) | Up to 4.0 L |
| Engine Compatibility (Diesel) | Up to 2.0 L |
| USB Output | Available (for charging mobile devices) |
| Wireless Charging Output | Up to 10 W |
| LED Lamp Brightness | 70 Lumens |
| Charging Time (via USB 2A) | 6-9 hours |
| Dimensions (L x W x H) | 190 x 85 x 28.5 mm |
| Weight | 523 g |
Image: AEG Jumpstarter JS15 dimensions (190 x 85 x 28.5 mm) and weight (523g), demonstrating its compact and portable design.
Warranty and Support
For warranty information and customer support, please refer to the official AEG website or contact your retailer. Keep your purchase receipt as proof of purchase.
Manufacturer: AEG
Model Number: 10736
ASIN: B0CC9N2FQQ
