ANTLUX 8FT 110W LED Wraparound Strip Light

1. Introduction

The ANTLUX 8FT 110W LED Wraparound Ultra Slim Strip Light is designed to provide high-efficiency, bright illumination for various environments. This fixture delivers 12600 lumens at 4000K, offering significant energy savings and a long operational lifespan of 50,000 hours. Its durable aluminum construction ensures excellent heat dissipation and stable performance.

Featuring an ultra-slim design and 180-degree illumination, this fixture provides soft, glare-free light, enhancing visual comfort. It is suitable for a wide range of applications including warehouses, workshops, supermarkets, garages, offices, basements, and utility rooms, serving as an ideal replacement for traditional fluorescent lighting.

Figure 1: ANTLUX 8FT LED Wraparound Ultra Slim Strip Light

2. Safety Information

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Always disconnect power at the circuit breaker before installing, servicing, or cleaning the fixture.
• Installation should be performed by a qualified electrician or a person familiar with the construction and operation of the product and the hazards involved.
• Ensure the fixture is properly grounded to avoid potential electrical hazards.
• Do not modify the fixture or use it for purposes other than its intended use.
• Do not handle the fixture with wet hands or while standing on wet or damp surfaces.
• Keep flammable materials away from the fixture during operation.

3. Package Contents

Verify that all components are present and undamaged before proceeding with installation.

• ANTLUX 8FT 110W LED Wraparound Strip Light fixture (2 units per pack)
• Mounting hardware (screws, anchors, wire nuts)
• Instruction manual

4. Setup and Installation

The ANTLUX LED strip lights are designed for easy and fast installation, even for a single person. The nuts can be revolved by hand for convenience. The fixtures are linkable, allowing for continuous runs by knocking out end holes and assembling them in line.

Figure 2: Easy-to-use thumb screws for mounting

Figure 3: Installation features and light distribution

Installation Steps:

1. Prepare for Installation: Turn off power at the circuit breaker before beginning any electrical work. Ensure the wall switch controlling the fixture is also in the OFF position.
2. Remove Old Fixture (if applicable): Disconnect the wiring (black, white, and ground) from the old fixture. Carefully remove the old fixture from the ceiling or mounting surface.
3. Install Mounting Plate: Secure the provided mounting plate to the ceiling or desired surface where the electrical wires emerge. Use appropriate screws and anchors for your surface type (e.g., drywall anchors for drywall).
4. Wire the Fixture: Hold the new LED fixture near the mounting plate. Connect the wires: white to white (neutral), black to black (live), and green/bare wire to the ground wire. Use the provided wire nuts to secure connections.
5. Test the Connection: Before fully securing the fixture, temporarily mount it and turn the power back on at the circuit breaker. Flip the wall switch to test if the light functions correctly. If it does, turn the power off again.
6. Secure the Fixture: Align the fixture with the mounting plate and secure it using the provided hardware. Ensure it is firmly attached to prevent accidental dislodging.
7. Restore Power: Once the fixture is fully installed and secured, restore power at the circuit breaker.

5. Operating Instructions

Operating the ANTLUX LED Wraparound Strip Light is straightforward:

• Ensure the fixture is correctly installed and connected to a power source as per the installation instructions.
• Use a standard wall switch to turn the light fixture ON or OFF.

6. Maintenance

The ANTLUX LED Wraparound Strip Light is designed for minimal maintenance, offering a long lifespan of 50,000 hours. Regular cleaning can help maintain optimal light output and appearance.

• Cleaning: Before cleaning, ensure the power to the fixture is turned off at the circuit breaker. Use a soft, dry, or slightly damp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
• Inspection: Periodically inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and address them promptly.
• No User-Serviceable Parts: The LED components and driver are integrated and not designed for user replacement. Attempting to open or modify the fixture will void the warranty.

7. Troubleshooting

If you encounter issues with your ANTLUX LED fixture, refer to the following common troubleshooting steps:

• Light Does Not Turn On:
  • Check if the power switch is in the ON position.
  • Verify that the circuit breaker supplying power to the fixture is not tripped.
  • Ensure all electrical connections (black, white, ground) are secure and correctly wired.
• Light Flickers:
  • Check for loose wiring connections at the fixture or the wall switch.
  • Ensure the voltage supply is stable and within the specified range (120 Volts).
• Reduced Brightness:
  • Ensure the fixture is clean and free from dust or debris that might obstruct light output.
  • Verify that the ambient temperature is within the recommended operating range.

If these steps do not resolve the issue, please contact ANTLUX customer support for further assistance.

8. Specifications

9. Warranty and Support

The ANTLUX 8FT LED Wraparound Strip Light is designed for long-term reliability, with an estimated lifespan of 23 years based on 6 hours of daily use. While specific warranty periods are not detailed, ANTLUX is committed to customer satisfaction.

If you require any support, have questions, or encounter issues with your product, please contact the ANTLUX customer service team. They are dedicated to providing timely assistance and ensuring a satisfactory solution.

For support, please refer to the contact information provided with your purchase or visit the official ANTLUX website.