1. Important Safety Information
Please read all instructions carefully before using this appliance and retain for future reference. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always place the heater on a firm, level surface.
- Do not cover the heater or block air inlets/outlets.
- Keep flammable materials (curtains, furniture, bedding) at least 1 meter (3 feet) away from the heater.
- Do not use in bathrooms, laundry areas, or similar wet locations.
- Unplug the heater when not in use.
- Do not operate with a damaged cord or plug.
- Keep out of reach of children and pets.
Safety Features:
- Overheat Protection: The heater automatically shuts off if it reaches an unsafe temperature (e.g., 65°C / 149°F).
- Tip-Over Protection: The heater automatically shuts off if it is accidentally knocked over (at a 45° angle).
- V0 Flame Retardant Material: Constructed with fire-resistant materials for enhanced safety.
- Reinforced Plug: Designed for durability and safe electrical connection.
Figure 1: Overview of Heater Safety Features
Figure 2: Tip-Over Protection in action
Figure 3: Overheat Protection mechanism
2. Product Overview
The Spardar SP-NFJ-03 is a compact and efficient 1800W ceramic fan heater designed to provide rapid and consistent warmth for indoor spaces. It features multiple heating modes, oscillation, and advanced safety mechanisms.
Figure 4: Spardar SP-NFJ-03 Ceramic Fan Heater
Key Features:
- Rapid Heating: Utilizes ceramic heating technology to quickly warm up a room.
- Multiple Modes: Offers Low Heat (650W), High Heat (1100W), Ultra High Heat (1800W), and Natural Wind (Fan Only) modes.
- 60° Oscillation: Distributes heat evenly across a wider area.
- 1-12 Hour Timer: Allows for scheduled operation and automatic shut-off.
- ECO Mode: Energy-saving setting to optimize power consumption.
- Low Noise Operation: Operates quietly at approximately 35 dB.
- Remote Control: For convenient operation from a distance.
3. Setup
- Unpacking: Carefully remove the heater from its packaging. Retain packaging for storage or return if necessary.
- Placement: Place the heater on a stable, flat, and heat-resistant surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater to allow for proper airflow and to prevent fire hazards. Do not place on soft surfaces like beds or rugs where openings may be blocked.
- Power Connection: Ensure the heater is switched off before plugging it into a standard electrical outlet. The power supply must match the voltage specified on the heater's rating label.
4. Operating Instructions
The Spardar SP-NFJ-03 can be operated using the control panel on the unit or the included remote control.
Figure 5: Control Panel and Remote Control
4.1 Power On/Off
- Press the Power button (On/Off symbol) on the control panel or remote to turn the heater on or off.
4.2 Selecting Heating Modes
Press the Mode button (vertical bars symbol) repeatedly to cycle through the available heating modes:
- Natural Wind (Fan Only): Provides cool air circulation.
- Low Heat (650W): For gentle warmth.
- High Heat (1100W): For moderate heating.
- Ultra High Heat (1800W): For maximum heating power.
Figure 6: Flexible Heating Modes
4.3 Oscillation Function
- Press the Oscillation button (curved arrows symbol) to activate or deactivate the 60° oscillation feature, which helps distribute warm air more widely.
Figure 7: 60° Wide-Angle Heating Range
4.4 Timer Setting
- Press the Timer button (clock symbol) to set the automatic shut-off timer from 1 to 12 hours. Each press increases the timer by one hour.
Figure 8: Intelligent 1-12 Hour Auto-Off Timer
4.5 Temperature Adjustment (ECO Mode)
- Use the + and - buttons to set your desired temperature. The heater will automatically adjust its power output to maintain this temperature, operating in an energy-saving ECO mode.
Figure 9: ECO Energy-Saving Mode
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
- Cleaning: Always unplug the heater and allow it to cool completely before cleaning. Use a soft, dry cloth to wipe the exterior surfaces. Do not use abrasive cleaners, waxes, or polishes.
- Dust Removal: Use a vacuum cleaner with a brush attachment to gently remove dust from the air intake and exhaust grilles.
- Storage: When not in use, store the heater in a cool, dry place, preferably in its original packaging, away from direct sunlight and moisture.
- No User-Serviceable Parts: Do not attempt to open or repair the heater yourself. Refer all servicing to qualified personnel.
6. Troubleshooting
If you encounter issues with your heater, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | Not plugged in; power outlet not working; safety feature activated. | Ensure plug is fully inserted. Test outlet with another device. Check for tip-over or overheat protection activation (unplug, wait 30 min, restart). |
| Heater stops working unexpectedly. | Overheat protection activated; tip-over protection activated; timer expired. | Check for obstructions. Ensure heater is upright. Check timer settings. Unplug, wait 30 min, restart. |
| Insufficient heat output. | Incorrect mode selected; room too large; blocked air vents. | Select a higher heating mode (e.g., 1800W). Ensure heater is appropriate for room size (up to 20 m²). Clear any obstructions from air vents. |
| Unusual noise or smell. | Dust accumulation; internal fault. | Unplug and clean thoroughly. If problem persists, discontinue use and contact customer support. |
If the problem persists after trying these solutions, please contact Spardar customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | Spardar |
| Model Number | SP-NFJ-03 |
| Color | Deep Black |
| Heat Output | 1800 Watts (Max) |
| Heating Element | Ceramic (PTC) |
| Heating Modes | Natural Wind (Fan Only), Low Heat (650W), High Heat (1100W), Ultra High Heat (1800W) |
| Oscillation | 60° |
| Timer | 1-12 Hours Auto-Off |
| Noise Level | Approximately 35 dB |
| Coverage Area | Up to 20 m² |
| Dimensions (Package) | 29 x 20 x 15.1 cm |
| Item Weight | 1.49 Kilograms |
| Safety Features | Overheat Protection, Tip-Over Protection, V0 Flame Retardant Material |
8. Warranty and Support
For warranty information or technical support, please contact Spardar customer service through the retailer where the product was purchased or visit the official Spardar website. Please have your model number (SP-NFJ-03) and purchase date available when contacting support.
