Sweetcrispy Counter Height Bar Stools (Set of 4) - Model KJEIT4R Instruction Manual

1. Safety Information

Please read and understand all instructions before assembly and use. Keep this manual for future reference.

• Always follow the assembly instructions carefully to avoid injury.
• Be cautious when moving the stools to prevent them from tipping or scratching the floor.
• Do not exceed the maximum weight limit of 330 pounds to ensure the stability and safety of the stools.
• Ensure all bolts are tightened securely before use and periodically check for tightness.
• Keep small parts away from children during assembly to prevent choking hazards.

2. Product Overview

The Sweetcrispy Counter Height Bar Stools are designed for comfort and durability, featuring a modern aesthetic suitable for various settings. This set includes four armless bar chairs with ergonomic backrests and sturdy metal legs.

Image: Set of four Sweetcrispy Counter Height Bar Stools, showcasing their design and color.

3. Components List

Before beginning assembly, ensure all parts are present and undamaged. Refer to the diagram below for identification.

Image: Detailed dimensions and component breakdown for the Sweetcrispy Bar Stool.

4. Assembly Instructions

Assembly typically takes 10-15 minutes per stool. Follow these steps carefully:

1. Step 1: Assemble the Metal Legs. Align the screw holes of Metal Leg (B) and Metal Leg (C). Use Wrench (H) to screw the Bolts (F)*2 into the center aligned screw holes. Note: Only screw in 50% at this stage.
2. Step 2: Attach Supporting Round Tubes. Align the round holes of the Supporting Round Tube (D) with the screw holes on the Metal Legs (B&C). Screw in the Bolts (E)*4 with Wrench (I). Note: Only screw in 50% at this stage.
3. Step 3: Attach Seat Cushion. Align the Metal Legs (B&C) over the pre-drilled holes underneath the Seat Cushion (A). Then fix it with the Bolts (G2)*2 and Wrench (H). Finally, screw the Bolts (G1)*2 into the remaining screw holes. Tighten all bolts in the order shown until they are complete. Note: Ensure all bolts are 100% tightened for stability.
4. Step 4: Final Tightening. Double-check and ensure all bolts are 100% tightened. Your bar stool is now ready for use.

5. Operating Instructions

These bar stools are designed for stationary seating at counter height surfaces.

• Ensure the stool is placed on a flat, stable surface before sitting.
• Use the footrest for comfortable seating and to maintain balance.
• Avoid standing on the stool or using it as a step ladder.
• Do not rock excessively or apply uneven weight, as this may compromise stability.

6. Maintenance & Care

Proper care will extend the life and appearance of your bar stools.

• Cleaning: The faux PU leather upholstery is waterproof and easy to clean. Wipe with a damp cloth to remove spills and dirt. Avoid harsh chemicals or abrasive cleaners.
• Frame Care: The black powder-coated tubular metal frames can be wiped clean with a soft, damp cloth.
• Anti-Slip Protectors: The anti-slip and anti-scratch protectors on the legs help prevent floor damage. Periodically check these protectors for wear and tear.
• Tightness: Regularly check all bolts and connections to ensure they remain tight. Re-tighten if necessary to maintain structural integrity.

Image: Illustrates the waterproof faux leather and anti-slip base features.

7. Troubleshooting

If you encounter any issues, refer to the following common solutions:

• Wobbling: Ensure the stool is on a flat surface. Check that all assembly bolts are fully tightened. Uneven floors may require shims under the leg protectors.
• Squeaking: Re-tighten all bolts. If squeaking persists, disassemble and reassemble, ensuring all parts are correctly aligned and tightened.
• Difficulty Cleaning Stains: For stubborn stains on faux leather, use a mild soap solution with a damp cloth. Test on an inconspicuous area first.

8. Specifications

9. Warranty & Support

Sweetcrispy is committed to providing quality products. While specific warranty details are not provided in this manual, if you have any questions or require assistance with your product, please do not hesitate to contact us through the retailer where you purchased the item. Our customer support team is ready to help.