Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Artika Zephyr 3-Light LED Pendant. Please read this manual thoroughly before beginning installation and retain it for future reference. Proper installation is crucial for safety and optimal performance.
Image: The Artika Zephyr 3-Light LED Pendant in Chrome finish, showcasing its modern design with three intertwined rings of light suspended from a circular ceiling canopy.
Safety Information
- WARNING: Risk of electric shock. Turn off power at the circuit breaker or fuse box before installation.
- All electrical connections must be in accordance with local and national electrical codes. If you are unfamiliar with proper electrical wiring, consult a qualified electrician.
- Do not install this fixture with wet hands or while standing on a wet surface.
- Ensure the mounting surface can support the weight of the fixture.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
- This fixture is designed for indoor use only.
Package Contents
Carefully unpack your fixture and identify all parts. Keep all packaging materials until you are sure all parts are present and in good condition. If any parts are missing or damaged, contact Artika customer service.
- Mounting bracket
- Ceiling canopy
- 3 LED pendant lights with adjustable cables
- Wire connectors
- Mounting screws and anchors
- Instruction manual
Image: The product packaging for the Artika Zephyr 3-Light LED Pendant, showing the fixture's design and key features on the box.
Setup and Installation
Follow these steps carefully to install your pendant light fixture.
- Turn Off Power: Before starting any electrical work, ensure the power supply to the junction box is turned off at the circuit breaker or fuse box.
- Prepare Mounting Bracket: Attach the mounting bracket to the junction box using the provided screws. Ensure it is securely fastened.
- Adjust Pendant Height: The pendant cables are adjustable. Determine the desired hanging height for each of the three pendants. To adjust, gently push the cable into the canopy's cable grip and pull to shorten, or push the small pin on the grip to release and lengthen. Ensure all three pendants are at your preferred heights before wiring.
- Wire Connections: Connect the fixture's wires to the household electrical wires.
- Connect the black wire (Live) from the fixture to the black wire (Live) from the junction box.
- Connect the white wire (Neutral) from the fixture to the white wire (Neutral) from the junction box.
- Connect the green or bare copper wire (Ground) from the fixture to the green or bare copper wire (Ground) from the junction box.
- Secure all connections with the provided wire connectors.
- Mount Canopy: Carefully tuck all wires into the junction box. Align the ceiling canopy with the mounting bracket and secure it using the canopy screws.
- Restore Power: Once the fixture is securely installed, restore power at the circuit breaker.
Image: Diagram illustrating the dimensions of the Artika Zephyr 3-Light LED Pendant, showing a total height of 80.71 inches (205 cm) and a width of 15.35 inches (39 cm).
Operating Instructions
The Artika Zephyr pendant light features adjustable color temperature (CCT) and is dimmable with compatible LED dimmers.
- Turning On/Off: Use your standard wall switch to turn the light fixture on or off.
- Dimming: This fixture is compatible with most LED dimmers. Install an LED-compatible dimmer switch (sold separately) to adjust the brightness level.
- Color Temperature Selection (CCT): The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To cycle through these options, quickly toggle your wall switch OFF and ON. The fixture will remember the last selected CCT when turned off for more than 10 seconds.
Image: A visual representation of the Artika Zephyr pendant light displaying its three selectable color temperatures: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight).
Maintenance
- Cleaning: To clean the fixture, ensure the power is off. Wipe with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- LEDs: The integrated LED lights are designed for a long lifespan (50,000 hours) and are not user-replaceable.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or dims unexpectedly. |
|
|
Specifications
- Model: PDT3-ZEC-CRJ
- Brand: Artika
- Light Source: Integrated LED
- Number of Lights: 3
- Color Temperature (CCT): 3000K / 4000K / 5000K (Selectable)
- Brightness: 1900 Lumens (Total)
- Wattage: 30 Watts (Total)
- Voltage: 120 Volts
- Dimmable: Yes, with LED-compatible dimmer
- Lifespan: 50,000 Hours
- Material: Aluminum, Plastic
- Finish: Chrome
- Dimensions: 15.4" L x 15.4" W x 80.7" H (Adjustable Height)
- Indoor/Outdoor Usage: Indoor
- Certifications: ETL, JA8 Certified, Damp Location
Warranty and Support
For warranty information or technical assistance, please contact Artika customer service. You can typically find contact details on the manufacturer's website or on the product packaging.
Manufacturer: Artika
Website: www.artika.com
