Introduction
The iRestore Elite Laser Hair Growth System is an FDA-cleared device designed to treat androgenic alopecia, hair loss, hair thinning, and pattern baldness in men and women. It utilizes advanced low-level red light therapy to stimulate hair follicles and encourage denser, fuller hair regrowth. This manual provides essential information for safe and effective use of your iRestore Elite system.
Safety Information
Important: Please read all safety information before using the device.
- The iRestore Elite is protected by a 1-year manufacturer's warranty against defects.
- This device is FDA 510(k) cleared for hair regrowth.
- Users must be at least 18 years of age.
- Refer to the Norwood-Hamilton Scale (approved: Class IIa to V) / Ludwig-Savin Scale (approved: Class I to II) and Fitzpatrick Skin Type Scale (approved: Type I to IV) for compatibility.
- Not indicated for users with severe hair loss.
- Clinically tested for males between 18 and 48 years and females between 18 and 60 years.
- If you are taking medications that affect skin sensitivity to light or have a medical condition that makes you extremely sensitive to light, consult your doctor before use.
Package Contents
Your iRestore Elite system package should contain the following items:
- iRestore Elite Laser Hair Growth Helmet
- Controller with Timer Display
- Universal Power Adapter
- Protective Hard Shell Carrying Case
- Storage Pouch for Cords
- Microfiber Cleaning Cloth
- Quick Start Guide
- User Manual (this document)
Image: The iRestore Elite helmet, controller, power adapter, and carrying case.
Setup
- Unpack the Device: Carefully remove all components from the packaging.
- Connect the Controller: Plug the helmet's cable into the designated port on the controller.
- Connect Power: Plug the universal power adapter into the controller, then into a wall outlet. Ensure the controller displays power.
- Adjust for Comfort: The iRestore Elite features medical-grade padding for comfort. Adjust the fit as needed for optimal scalp contact.
Image: Close-up of the iRestore Elite controller with its display.
Operating Instructions
- Preparation: Ensure your hair and scalp are clean and dry before each session.
- Place the Helmet: Position the iRestore Elite helmet comfortably on your head, ensuring full contact with your scalp. The device has a safety feature that pauses operation if it loses contact with your head.
- Start Treatment: Press the power button on the controller, then the play/pause button to begin the 12-minute treatment cycle. The display will show the remaining time.
- During Treatment: The device is hands-free, allowing you to perform other activities during the 12-minute session.
- End of Session: The device will automatically shut off after 12 minutes.
- Frequency: Use the iRestore Elite for 12 minutes daily for optimal results. Consistent use is key for visible improvements, typically seen within 3-6 months.
Image: A person wearing the iRestore Elite helmet during a treatment session.
Video: Demonstrates the ease of use and hands-free nature of the iRestore Elite device, including how to wear it and operate the controller.
Maintenance
- Cleaning: Use the provided microfiber cleaning cloth or a soft, damp cloth to gently wipe the interior and exterior of the helmet after each use. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the device in its protective hard shell carrying case in a cool, dry place when not in use. This protects the device from dust and damage.
- Pads: The medical-grade padding can be removed for cleaning or replacement if necessary.
Image: The iRestore Elite stored securely in its protective hard shell carrying case.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Not properly connected to power or helmet not making contact. | Ensure all cables are securely connected and the power adapter is plugged into a working outlet. Confirm the helmet is properly seated on your head, engaging the safety sensors. |
| Lights turn off during session. | Helmet lost contact with head (safety feature). | Adjust the helmet position to ensure continuous contact with your scalp. The device will resume once contact is re-established. |
| Controller display is blank. | No power or controller malfunction. | Check power connections. If the issue persists, contact iRestore customer support. |
Specifications
- Model: iRESTORE Elite
- Light Source: 500 Lasers and LEDs
- Total Power Output: 2500 mW
- Wavelengths: Triple wavelength technology (625/655/680nm)
- Treatment Duration: 12 minutes per session
- FDA Clearance: FDA 510(k) cleared
- Package Dimensions: 13.07 x 11.18 x 7.56 inches
- Weight: 4.06 Pounds
- UPC: 859690003910
- Manufacturer: iRestore
Video: An animated overview of the iRestore Elite's features, including its 500 lasers and LEDs, triple wavelength technology, and superior scalp coverage.
Warranty and Support
The iRestore Elite Laser Hair Growth System comes with a 1-year manufacturer's warranty against defects. For warranty claims, technical support, or any questions regarding your device, please contact iRestore customer service.
For more information, visit the official iRestore store: iRestore Store on Amazon