truke Buds Clarity 5 True Wireless Earbuds User Manual

1. Introduction

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your truke Buds Clarity 5 True Wireless Earbuds. Please read this manual carefully before using the product to ensure optimal performance and longevity.

2. Package Contents

Verify that all items are present in your product package:

• truke Buds Clarity 5 Earbuds (Left and Right)
• Wireless Charging Case
• USB Charging Cable
• Eartips (various sizes)
• User Manual

3. Product Overview

The truke Buds Clarity 5 earbuds are designed for clear audio and communication. They feature 13mm Titanium Speaker drivers for rich sound and 6-Mic Environmental Noise Cancellation (ENC) for clear calls.

Image: truke Buds Clarity 5 True Wireless Earbuds with their charging case. The earbuds are black with silver accents and the truke logo, featuring a small green indicator light. The charging case is also black and glossy, with a green indicator light on the front.

The earbuds are housed in a unique magnetic charging case, ensuring secure storage and easy access. The compact design makes them convenient for daily use.

4. Setup

4.1 Charging the Earbuds and Case

Before first use, fully charge the earbuds and the charging case.

• Place the earbuds into the charging case. Ensure they are correctly seated.
• Connect the USB charging cable to the charging port on the case and to a power source.
• The indicator lights on the case and earbuds will show charging status.
• A full charge provides up to 10 hours of playtime for the earbuds, with the charging case extending total playtime up to 80 hours.
• Fast charging allows for approximately 10 hours of playtime from a 10-minute charge.

Image: Graphic illustrating the 80 hours of extended playtime for the truke Buds Clarity 5 earbuds. A large '80 Hrs*' is prominently displayed next to an abstract representation of an earbud and charging case, with text indicating "10mins Charging = 10Hrs Playtime".

4.2 Initial Pairing

The earbuds feature one-step pairing for convenience.

1. Open the charging case. The earbuds will automatically enter pairing mode.
2. On your device (smartphone, tablet, etc.), enable Bluetooth.
3. Search for "truke Buds Clarity 5" in the list of available Bluetooth devices.
4. Select "truke Buds Clarity 5" to connect. Once connected, you will hear a confirmation tone.

The earbuds utilize Bluetooth 5.3 technology for stable connections.

5. Operation

5.1 Touch Controls

The truke Buds Clarity 5 earbuds are equipped with touch controls for managing audio playback, calls, and other functions. Specific touch gestures for various functions are typically detailed in a quick start guide or product insert. Refer to that document for a complete list of touch commands.

5.2 EQ Modes

The earbuds offer three preset Equalizer (EQ) modes to customize your listening experience:

• Dynamic Mode: Standard audio profile.
• Movie Mode: Optimized for cinematic audio.
• Bass Boost Mode: Enhanced bass for deeper sound.

To switch between EQ modes, press and hold the right earbud for 3 seconds.

Image: truke Buds Clarity 5 earbuds with a graphic illustrating three EQ modes: Dynamic Mode, Movie Mode, and Bass Boost Mode. An icon shows a finger pressing and holding the right earbud for 3 seconds to switch modes.

5.3 Dual Connectivity

The earbuds support seamless dual-connectivity, allowing you to connect to two devices simultaneously (e.g., a smartphone and a laptop).

• Once connected to the first device, pair the earbuds with the second device following the initial pairing steps.
• You can easily switch between audio sources or answer incoming calls from either connected device.

Note:

• The dual-pairing feature will automatically close if not connected with the second device within 3 minutes.
• To resume dual-pairing, tap either earbud four times, or place both earbuds back into the charging case and then remove them.

Image: A visual representation of the truke Buds Clarity 5 earbuds connected to both a laptop and a smartphone simultaneously, demonstrating the dual-connectivity feature. An incoming call is shown on the smartphone screen.

5.4 Environmental Noise Cancellation (ENC)

The 6-Mic ENC technology enhances call clarity by reducing background noise, ensuring your voice is heard clearly during conversations.

Image: Graphic illustrating the 6-Mic Advanced ENC feature of the truke Buds Clarity 5 earbuds. An earbud is shown with sound waves emanating from it, alongside icons representing various noisy environments like an airplane, train, and megaphone, indicating noise reduction.

5.5 Ultra-Low Latency Gaming

For gaming, the earbuds offer 35ms ultra-low latency, providing synchronized audio for a competitive edge.

Image: truke Buds Clarity 5 earbuds positioned in front of a smartphone displaying a first-person shooter game, highlighting the 35ms ultra-low latency feature for gaming.

6. Maintenance

• Cleaning: Regularly clean the earbuds and charging case with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• Eartips: Remove and clean the eartips periodically to prevent wax buildup. Ensure they are completely dry before reattaching.
• Storage: When not in use, store the earbuds in their charging case to protect them and keep them charged.
• Water Resistance: The earbuds are IPX5 water-resistant, meaning they can withstand splashes and sweat. Do not submerge them in water or expose them to heavy rain.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Your truke Buds Clarity 5 earbuds come with a 12-month warranty, ensuring quality and customer satisfaction. truke maintains a vast service network with over 350 service points for convenient and accessible support.

For warranty claims, technical assistance, or further inquiries, please refer to the contact information provided on the official truke website or your product's warranty card.