1. Introduction
Thank you for choosing the FTes RFKits V70 Wireless Video Intercom System. This system provides enhanced security and convenience for your home or multi-family dwelling. Featuring a 1080p outdoor camera, a 7-inch indoor touchscreen monitor, PIR motion detection, night vision capabilities, and seamless integration with the Tuya smart home application, this intercom allows for clear two-way communication and remote access control. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your device.
2. Safety Information
Please read and understand all safety instructions before installing and operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Electrical Safety: Ensure all wiring is performed by a qualified electrician if you are unsure. Disconnect power before any installation or maintenance.
- Water Exposure: The outdoor unit is designed to be waterproof (IP55), but avoid submerging it in water or exposing it to high-pressure water jets.
- Temperature: Operate the system within the specified temperature range (-30°C to +60°C) to prevent damage.
- Placement: Install the indoor monitor in a dry, stable location away from direct sunlight and heat sources.
- Children: Keep packaging materials and small components away from children to prevent choking hazards.
3. Package Contents
Carefully unpack the box and ensure all the following items are included:
- Indoor Monitor (7-inch touchscreen)
- Outdoor Camera Unit
- Power Adapters (for indoor monitor)
- Mounting Brackets and Screws
- Wiring Cables (e.g., 4-core cable)
- User Manual (this document)
Figure 3.1: Illustration of package contents and a basic wiring diagram.
4. Product Overview
Familiarize yourself with the components of your FTes RFKits V70 system.
4.1. Outdoor Camera Unit
Figure 4.1: Outdoor camera unit and indoor monitor dimensions and features.
- 1080p Camera: High-resolution video for clear visitor identification.
- PIR Motion Detection: Detects human movement and triggers alerts/recording.
- IR LEDs: Provides infrared illumination for clear night vision.
- Microphone & Speaker: Enables two-way audio communication.
- Call Buttons: For visitors to initiate a call to the indoor monitor(s). For multi-family units, each button connects to a specific indoor monitor.
- Rain Cover: Integrated protection against weather elements.
Figure 4.2: Outdoor unit with customizable nameplate area for multi-family use.
4.2. Indoor Monitor
Figure 4.3: Indoor monitor controls and rear wiring ports.
- 7-inch TFT LCD Touchscreen: Displays video feed and allows interaction with the system.
- Control Buttons: Unlock key, Left/Right select, Monitor/Confirm, Answer/Return.
- TF Card Slot: For local storage of video recordings and snapshots.
- Speaker & Microphone: For two-way audio.
- Wiring Port: Connects to the outdoor unit and power supply.
- Adjustments: Options to adjust color, brightness, intercom volume, and ringing mode.
5. Setup & Installation
Follow these steps for proper installation of your video intercom system.
5.1. Wiring
The system uses a 4-wire connection between the outdoor unit and the indoor monitor. Ensure all connections are secure.
Figure 5.1: Wiring diagram for the FTes RFKits V70 system. Note: Electronic lock is not included.
- Connect the 4-core cable from the outdoor unit to the designated wiring port on the indoor monitor.
- If installing multiple indoor monitors (for multi-family homes), connect each monitor to its respective call button on the outdoor unit.
- Connect the power supply to the indoor monitor.
- If using an electronic control lock (not included), connect it according to the provided wiring diagram.
5.2. Physical Installation
Figure 5.2: Installation of the outdoor camera unit.
- Outdoor Unit: Choose a suitable location near your entrance, typically at eye level, ensuring a clear view of visitors. Mount the unit securely using the provided screws and mounting bracket. Ensure the rain cover is properly positioned.
- Indoor Monitor: Mount the indoor monitor on a wall at a convenient height within your home. Ensure it is within reach of a power outlet.
5.3. Tuya App Setup
The system integrates with the Tuya Smart app for remote control and monitoring.
Figure 5.3: Tuya app installation and system pairing.
- Download the free "Tuya Smart" app from the App Store (iOS) or Google Play Store (Android).
- Register or log in to your Tuya account.
- Follow the in-app instructions to add your FTes RFKits V70 video intercom system. This typically involves putting the indoor monitor into pairing mode and connecting it to your home Wi-Fi network.
6. Operating Instructions
6.1. Answering a Call
When a visitor presses the call button on the outdoor unit, the indoor monitor will ring and display the visitor's video feed.
- Press the Answer/Return button on the indoor monitor to speak with the visitor.
- To end the call, press the Answer/Return button again.
6.2. Two-Way Audio & Unlocking
Figure 6.1: Two-way audio communication and one-key unlock.
- During a call, you can speak to the visitor and hear their response.
- If an electronic lock is connected, press the Unlock button on the indoor monitor to remotely open the door.
6.3. Remote Access via Tuya App
Figure 6.2: Remote control and monitoring through the Tuya app.
- When a visitor calls, you will receive a notification on your smartphone via the Tuya app.
- Open the app to view the live video feed, speak to the visitor, and remotely unlock the door from anywhere with an internet connection.
6.4. Monitoring
- Press the Monitor button on the indoor unit to view the live feed from the outdoor camera at any time.
6.5. Video Recording & Playback
Figure 6.3: Video recording and playback interface.
- Insert a TF card (not included) into the indoor monitor's TF card slot to enable video recording.
- The system can automatically record video when motion is detected or when a visitor calls.
- Access recorded videos and snapshots through the indoor monitor's menu or the Tuya app.
6.6. Night Vision & PIR Motion Detection
Figure 6.4: Day and night vision with PIR motion detection.
- The outdoor unit automatically switches to night vision mode in low-light conditions, providing clear black and white video.
- PIR motion detection triggers recording and notifications when movement is detected in the camera's field of view.
6.7. Do Not Disturb Mode
- Activate the "Do Not Disturb" mode from the indoor monitor's settings to silence the ringtone for a specified period. You will still receive notifications on the Tuya app.
7. Maintenance
Regular maintenance ensures the optimal performance and longevity of your intercom system.
- Cleaning: Use a soft, damp cloth to clean the indoor monitor screen and the outdoor camera lens. Avoid abrasive cleaners or solvents.
- Outdoor Unit: Periodically check the outdoor unit for any obstructions (e.g., dirt, spiderwebs) that might block the camera or microphone. Ensure the rain cover is intact.
- Software Updates: Check the Tuya app regularly for any available firmware updates for your device to ensure you have the latest features and security patches.
- Wiring: Occasionally inspect wiring connections for any signs of wear or damage.
8. Troubleshooting
If you encounter issues with your FTes RFKits V70 system, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on indoor monitor | Power issue, loose wiring, camera malfunction | Check power connections. Ensure 4-core cable is securely connected. Restart the system. |
| No audio or poor audio quality | Microphone/speaker obstruction, volume settings, wiring issue | Check for obstructions on outdoor unit. Adjust volume settings on indoor monitor. Verify wiring. |
| Indoor monitor not ringing | Do Not Disturb mode active, volume too low, wiring issue | Deactivate Do Not Disturb mode. Increase ringtone volume. Check wiring. |
| Cannot connect to Tuya app | Incorrect Wi-Fi password, weak Wi-Fi signal, pairing mode not active | Ensure correct Wi-Fi credentials. Move monitor closer to router. Re-enter pairing mode in app. |
| Remote unlock not working | Electronic lock not connected, power issue to lock, wiring issue | Verify electronic lock connection and power. Check wiring to the lock. |
9. Specifications
Key technical specifications for the FTes RFKits V70 Wireless Video Intercom System:
- Brand: FTes RFKits
- Model Number: V70
- Product Dimensions (L x W x H): 20 x 11 x 37 cm (7.87 x 4.33 x 14.57 inches)
- Item Weight: 1 kilogram (2.2 lbs)
- Outdoor Camera Resolution: 1080p
- Indoor Monitor Screen: 7-inch TFT LCD Touchscreen
- Connectivity: Wireless (Wi-Fi for Tuya app), 4-wire system for intercom
- Motion Detection: PIR (Passive Infrared)
- Night Vision: Yes, with IR LEDs
- Waterproof Rating (Outdoor Unit): IP55
- Operating Temperature: -30°C to +60°C
- Included Components: Indoor monitor, outdoor camera, power adapters, wiring cables, mounting hardware.
10. Warranty & Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact FTes RFKits customer service directly. Details regarding spare parts availability are not provided in this manual.