Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your URAQT Bicycle Computer, Model KS-MASBCM240314-FBA. Please read this manual thoroughly before use to ensure proper functionality and to maximize your cycling experience.
Product Features
- 19 Functions: Tracks calories burned, distance, average speed, and more.
- Automatic Start/Stop: Enters sleep mode after 5 minutes of inactivity and reactivates upon movement or button press.
- IP65 Waterproof: Designed to function reliably in rainy conditions. (Note: Do not immerse directly in water.)
- LED Backlight & Touch Control: Features a backlit display for clear readability in low light. Activate constant backlight by simultaneously touching the "Mode" and "Set" buttons. Deactivate by repeating the action. The anti-glare screen ensures visibility in direct sunlight.
- Extension Mount Support: Includes universal and extension mounts. Extension mounts are compatible with handlebar diameters from 22.2 to 31.8 mm.
Figure 1: Overview of the 19 functions available on the URAQT Bicycle Computer.
Figure 2: The bicycle computer is IP65 waterproof, suitable for use in rainy conditions.
Figure 3: The display features an LED backlight for clear visibility in both day and night conditions.
What's in the Box
The package includes the following components:
- 1x URAQT Bicycle Computer
- 2x CR2032 Batteries (for computer and sensor)
- 1x Speed Sensor
- 1x Wheel Magnet
- 1x Handlebar Mount
- 1x Rubber Ring for Mount
- 2x Adhesive Pads
- Several Cable Ties
- 1x User Manual
Figure 4: All components included in the URAQT Bicycle Computer package.
Setup and Installation
1. Battery Installation
Install the CR2032 batteries into both the bicycle computer and the speed sensor.
- For the Bicycle Computer: Open the battery compartment. Insert a coin into the groove of the battery cover and turn it to open. Insert the CR2032 battery with the positive (+) terminal facing upwards. Close the compartment.
- For the Speed Sensor: Open the sensor's battery cover. Ensure the positive (+) sign of the battery is oriented upwards and insert the CR2032 battery into the compartment. Close the cover.
Video 1: Detailed instructions for installing batteries in the URAQT Bicycle Computer and its sensor, along with initial setup steps.
2. Sensor and Magnet Installation
Proper placement of the sensor and magnet is crucial for accurate readings.
- Sensor Placement: Attach the speed sensor to the front fork of your bicycle using the provided cable ties. The sensor should be positioned on the side of the fork closest to the wheel spokes.
- Magnet Placement: Attach the magnet to a spoke on the front wheel. The flat side of the magnet must face the sensor.
- Distance Requirement: The distance between the magnet and the sensor should be approximately 3 mm. Closer is better for optimal signal detection. Ensure the magnet aligns with the sensor's detection area (usually marked).
- Sensor-to-Computer Distance: The distance between the sensor and the bicycle computer should not exceed 50 cm for reliable signal reception.
Figure 5: Correct installation and alignment of the speed sensor and wheel magnet.
Figure 6: Visual guide for sensor and magnet installation, emphasizing proper alignment and distance.
3. Mounting the Bicycle Computer
Secure the computer to your handlebar using the provided mount.
- Use the rubber ring to secure the mount base to your handlebar.
- Align the screw hole at the bottom of the computer with the screw hole on the mount. Press down and turn clockwise until it is fully screwed in. A locking mechanism prevents accidental detachment.
Operation
1. Unit Selection (Miles/Kilometers)
The initial default unit is Miles. Press the left button to select your preferred unit (Miles or Kilometers) and the right button to confirm. (Note: Miles displayed on this computer represent actual miles; 1 mile = 1.609 kilometers.)
2. Entering Configuration Mode
To access configuration settings, press and hold both the left and right buttons simultaneously for 3 seconds. "2060" will appear on the screen, indicating you are in configuration mode. Use the left button to modify values and the right button to confirm, adjusting from right to left.
3. Setting the Clock (12/24 Hours)
In clock mode, press the left button for 3 seconds to enter the 12/24 hour setting. Continue pressing the left button to toggle between 12-hour and 24-hour formats. Press the right button to enter the hour setting; the digits will flash. Use the left button to adjust the hour. Repeat for minutes.
4. Selecting Operating Modes
Press the right button repeatedly without interruption to cycle through the following operating modes: CLK (Clock), ODO (Odometer), DST (Trip Distance), MXS (Maximum Speed), AVS (Average Speed), TM (Elapsed Time), SCAN (Automatic cycling through DST, MXS, AVS, TM).
Maintenance
The computer includes maintenance reminder settings. The default reminder value is 200 miles (or kilometers, depending on your unit setting). You can adjust this value in configuration mode. The rightmost value transitions to the next parameter. Use the left button to select the value and the right button to confirm.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speed is always 0 during riding. | Incorrect distance or angle between magnet and sensor. | Adjust the magnet and sensor to be within 3mm and properly aligned. Refer to "Sensor and Magnet Installation". |
| Speed value does not match actual speed. | Incorrect wheel circumference setting. | Ensure the wheel circumference is correctly set in the configuration mode. Refer to your bicycle's tire specifications or a wheel circumference chart. |
| Slow response. | Poor installation or low battery. | Check sensor/magnet alignment. Replace batteries if necessary. |
| Black screen. | Operating below 0 degrees Celsius. | The screen will return to normal once the temperature rises. |
| Gray screen. | Prolonged exposure to direct sunlight. | The screen will return to normal after being in the shade for some time. Pause for 10 seconds and resume. |
| Slow touch response. | Heavy rain or strong storms. | In heavy rain, the touch function may automatically activate a water clearing feature on the touch area surface. This is normal. |
Specifications
- Brand: URAQT
- Model Number: KS-MASBCM240314-FBA
- Color: Black
- Display Type: LCD
- Material Type: Polyester
- Product Dimensions (L x W x H): 4.5 x 2 x 6 cm
- Item Weight: 79 Grams
- Sensor Type: Speed Sensor
- Battery Composition: Mercury-zinc oxide (CR2032)
- Connectivity Technology: Wired (Note: Product specifications mention ANT, but the physical product and installation video indicate a wired sensor.)
- International Protection Rating: IP65 (Dust tight and protected against water jets)
Figure 7: Dimensions of the URAQT Bicycle Computer.
Warranty and Support
For warranty information, technical support, or any inquiries regarding your URAQT Bicycle Computer, please refer to the contact details provided with your purchase or visit the official URAQT website. Keep your proof of purchase for warranty claims.
