MCombo Small Power Lift Recliner Chair User Manual

1. Introduction

Thank you for choosing the MCombo Small Power Lift Recliner Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new recliner. Please read it thoroughly before use and retain it for future reference.

Image 1.1: The MCombo Small Power Lift Recliner Chair, featuring a coffee-colored fabric finish.

2. Safety Instructions

To ensure safe operation and prevent injury or damage, please adhere to the following guidelines:

• Weight Limit: Do not exceed the maximum weight capacity of 350 pounds (158 kg).
• Children and Pets: Keep children and pets away from the chair's moving parts, especially during operation.
• Power Cord: Ensure the power cord is not pinched, tangled, or placed under the chair. Avoid placing heavy objects on the cord.
• Clearance: Maintain adequate clearance around the chair to prevent obstruction during reclining or lifting.
• Stable Surface: Place the chair on a flat, stable surface.
• Liquids: Avoid spilling liquids on the chair, especially near electrical components.
• Disassembly: Do not attempt to disassemble or repair the chair yourself. Contact customer support for assistance.
• Power Outage: In case of a power outage while reclined, the chair cannot be manually returned to an upright position. Ensure a backup power source or carefully exit the chair if safe to do so.

3. Package Contents

Your MCombo Power Lift Recliner Chair is shipped in two boxes. Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact MCombo customer support.

Image 3.1: The recliner chair components are shipped in two separate boxes, which may arrive on different days.

Included Components:

• Backrest
• Left Armrest
• Right Armrest
• Base (Seat)
• Accessories Box (containing power adapter, remote controls, and small parts)
• Instruction Manual (this document)

4. Assembly Instructions

Assembly of your MCombo Power Lift Recliner Chair is designed to be straightforward and typically takes about 20 minutes with no tools required. It is recommended to have two people for easier handling of components.

Image 4.1: The main components of the recliner chair laid out for assembly.

Step-by-Step Assembly:

1. Unpack Components: Carefully remove all parts from the boxes and lay them out on a clean, soft surface to prevent scratches.
2. Attach Backrest: Align the metal brackets on the backrest with the corresponding slots on the seat base. Slide the backrest down firmly until it locks into place. Ensure a secure connection.
3. Attach Armrests: Slide each armrest onto the side rails of the seat base. Ensure they are fully seated and secure.
4. Connect Wiring: Locate the electrical cables extending from the backrest, armrests, and seat base. Connect all corresponding wires. There are typically two sets of white/red connectors for the massage/heat functions and a main power connector for the lift mechanism. Refer to the specific wiring diagram in the included accessory manual for detailed connections.
5. Connect Power Adapter: Plug the power adapter into the chair's main power input, then plug the adapter into a wall outlet.
6. Test Functions: Before final placement, test all functions (lift, recline, massage, heat) using the remote controls to ensure proper operation.

5. Operation

5.1 Power Lift and Recline Functions

The chair features a counter-balanced lift mechanism and a TUV certified actuator to assist with standing and reclining. Use the two-button remote control for these functions.

Image 5.1: The two-button remote for controlling the chair's lift and recline positions.

• To Lift: Press and hold the UP arrow button. The chair will slowly tilt forward and lift, assisting you to a standing position.
• To Recline: Press and hold the DOWN arrow button. The chair will recline backward and the footrest will extend. Release the button at your desired position. The chair offers 3 distinct reclining positions.
• To Return to Upright: Press and hold the UP arrow button until the chair returns to its fully upright position.

5.2 Massage and Heat Functions

The chair features 8 vibration nodes, 3 massage modes, 3 intensity levels, and a lumbar heating zone. These functions are controlled by a separate remote.

Image 5.2: The remote control for massage and heat functions, indicating various settings and body zones.

• Heat Function: Press the HEAT button to activate lumbar heating. Press again to turn off. The heating function operates independently of the vibration massage.
• Massage Modes: Press the MODE button to cycle through 3 different massage patterns.
• Intensity Levels: Use the INTENSITY + or INTENSITY - buttons to adjust the vibration strength (3 levels).
• Vibration Zones: Buttons labeled BACK, LUMBAR, THIGH, and LEG allow you to select specific areas for vibration massage.
• Timer: Press the TIMER button to set an auto-off timer for 10, 20, or 30 minutes.

5.3 USB Charging Ports and Convenience Features

The chair is equipped with convenient features for enhanced user experience.

Image 5.3: Armrest features including USB ports, cup holders, and side pockets.

• USB Charging Ports: Located on the side of the chair, these ports allow you to charge your electronic devices while relaxing.
• Cup Holders: Integrated cup holders on both armrests keep beverages within easy reach.
• Side Pockets: Convenient side pockets provide storage for remote controls, magazines, or other small items.
• Extended Footrest: The design includes an extended footrest to provide full, comfortable support for your legs and ankles when reclined.

Image 5.4: The extended footrest provides comprehensive leg support.

6. Care and Maintenance

Proper care will extend the life and appearance of your recliner chair.

• Cleaning: Wipe clean with a damp cloth. For spills, blot immediately with a clean, dry cloth. Avoid harsh chemicals or abrasive cleaners.
• Fabric Care: The chair uses OEKO-TEX Standard 100 certified fabric, ensuring it is free from harmful substances. Regular vacuuming with a soft brush attachment can help maintain the fabric.
• Inspection: Periodically check all connections and fasteners to ensure they are tight.
• Power Cord: Regularly inspect the power cord for any signs of damage. If damaged, discontinue use and contact customer support.

Image 6.1: The chair's fabric is OEKO-TEX Standard 100 certified for safety and quality.

7. Troubleshooting

If you encounter issues with your recliner, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact MCombo customer support for further assistance.

8. Specifications

Detailed specifications for the MCombo Small Power Lift Recliner Chair.

Image 8.1: Dimensional overview of the recliner chair in various positions.

Image 8.2: The 6.3-inch thick seat cushion provides enhanced comfort and support.

9. Warranty and Support

9.1 2-Year Limited Warranty

Your MCombo Power Lift Recliner Chair is backed by a 2-year limited warranty from the date of purchase. This warranty covers free replacements for the following components:

• Reclining/Lifting Mechanisms
• Electrical Systems
• Upholstery & Cushions
• Wood/Metal Frame Structures

Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, or unauthorized modifications.

9.2 Customer Support

For any questions, concerns, or warranty claims, please contact MCombo customer support. You can find contact information on the MCombo official website or through your purchase platform.

Online Support: Visit the MCombo Store on Amazon for product information and support resources.