SWAREY H1

SWAREY H1 800ML Ultrasonic Cleaner User Manual

Model: H1

1. Introduction

Thank you for purchasing the SWAREY H1 800ML Ultrasonic Cleaner. This device utilizes 45,000Hz ultrasonic waves to provide effective and deep cleaning for various items such as jewelry, glasses, watch bands, dentures, and coins. This manual provides essential information for the safe and efficient operation and maintenance of your ultrasonic cleaner.

2. Important Safety Information

Please read all safety instructions carefully before using the appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Do not immerse the main unit (base with power cord) in water or other liquids.
  • Ensure the power cord and plug are not damaged. Do not operate if damaged.
  • Keep out of reach of children. This appliance is not a toy.
  • Do not operate the cleaner without liquid in the tank.
  • Always unplug the appliance before cleaning or when not in use.
  • Do not disassemble or attempt to repair the unit yourself. Contact qualified service personnel.
  • Use only tap water or a suitable cleaning solution. Avoid flammable or corrosive liquids.
  • Do not place items that may be damaged by ultrasonic vibrations (e.g., certain soft gemstones, non-waterproof watches).
  • Avoid touching the water during operation.
  • Ensure proper ventilation during use.

3. Package Contents

Verify that all items are present in the package:

  • 1 x SWAREY H1 Ultrasonic Cleaner Main Unit
  • 1 x Large Cleaning Basket
  • 1 x Small Cleaning Basket
  • 1 x User Manual
SWAREY H1 Ultrasonic Cleaner package contents including the main unit, two cleaning baskets, and user manual.

Image: Contents of the SWAREY H1 Ultrasonic Cleaner package.

4. Product Overview

The SWAREY H1 Ultrasonic Cleaner features an 800ML capacity tank and a user-friendly interface for efficient cleaning.

SWAREY H1 Ultrasonic Cleaner with lid open, showing the internal tank and baskets.

Image: Front view of the SWAREY H1 Ultrasonic Cleaner with the lid open, revealing the stainless steel tank and included cleaning baskets.

Key Features:

  • 800ML Capacity: Accommodates various items from small jewelry to glasses.
  • 45,000Hz Ultrasonic Frequency: Provides powerful and deep cleaning action.
  • 4 Cleaning Modes: Pre-set modes for Glasses (180s), Jewelry (240s), Watch (300s), and Degas (360s).
  • Split Structure Design: The cleaning tank separates from the base for easy water pouring and cleaning.
  • SUS304 Stainless Steel Tank: Durable and corrosion-resistant material.
  • Advanced Degas Function: Helps prevent oxidation and improves cleaning effectiveness by removing dissolved gases.
  • LED Digital Display: Clearly indicates cleaning time and mode.
Diagram showing the three-layer split design of the SWAREY H1 Ultrasonic Cleaner, highlighting the removable tank, lid, and base.

Image: Exploded view illustrating the split design of the cleaner, showing the removable tank, lid, and base unit.

SWAREY H1 Ultrasonic Cleaner in operation, showing glasses being cleaned in the tank with ultrasonic waves indicated.

Image: The ultrasonic cleaner in action, demonstrating its 360-degree deep cleaning capability with glasses inside the tank.

5. Setup

  1. Unpack: Carefully remove all components from the packaging.
  2. Placement: Place the main unit on a stable, flat, and dry surface, away from heat sources and direct sunlight. Ensure there is adequate ventilation.
  3. Separate Tank: Lift the cleaning tank from the base unit using the integrated handle.
  4. Fill Tank: Fill the stainless steel tank with tap water. For enhanced cleaning, you may add a few drops of dish soap or a specialized ultrasonic cleaning solution. Do not exceed the maximum fill line.
  5. Insert Basket: Place the appropriate cleaning basket (large or small) into the tank.
  6. Place Items: Carefully place the items to be cleaned into the basket. Ensure items are fully submerged but not overcrowded.
  7. Reassemble: Place the filled tank back onto the base unit, ensuring it is securely seated. Close the lid.
  8. Connect Power: Plug the power cord into a grounded electrical outlet (AC 100-120V, 50/60Hz or AC 220-240V, 50/60Hz depending on your model).
A hand lifting the removable tank of the SWAREY H1 Ultrasonic Cleaner from its base unit.

Image: Demonstrating the removable tank feature, showing how to lift the tank from the base for filling or emptying.

6. Operating Instructions

Follow these steps to operate your SWAREY H1 Ultrasonic Cleaner:

  1. Power On: After setup, press the Power button (indicated by a power symbol) to turn on the unit. The LED display will illuminate.
  2. Select Mode: Press the Mode button (indicated by an 'M' symbol) repeatedly to cycle through the four pre-set cleaning modes:
    • Glasses Mode (180s): For eyeglasses, sunglasses, optical lenses.
    • Jewelry Mode (240s): For rings, necklaces, earrings, bracelets.
    • Watch Mode (300s): For waterproof watch bands and cases.
    • Degas Mode (360s): For items requiring enhanced cleaning and removal of dissolved gases.
    The selected time will be displayed on the LED screen.
  3. Start Cleaning: Once the desired mode is selected, the cleaning cycle will begin automatically after a short delay, or you may press the Start/Stop button (often integrated with the Power button or a separate play/pause icon).
  4. During Cleaning: The unit will operate for the selected duration. A gentle buzzing sound is normal during ultrasonic cleaning.
  5. End of Cycle: The unit will automatically shut off when the cleaning cycle is complete.
  6. Remove Items: Unplug the unit. Carefully lift the tank from the base. Remove the cleaning basket and retrieve your cleaned items.
  7. Rinse and Dry: Rinse the cleaned items under clean running water and dry them thoroughly with a soft cloth.
Control panel of the SWAREY H1 Ultrasonic Cleaner showing buttons for mode selection and LED display.

Image: Close-up of the control panel with LED display and mode selection buttons.

Recommended Applications:

Various items like glasses, jewelry, and watches being cleaned in the SWAREY H1 Ultrasonic Cleaner.

Image: Examples of items suitable for cleaning, including glasses, jewelry, and watch straps.

Before and after images of a watch, glasses, and a necklace cleaned with the SWAREY H1 Ultrasonic Cleaner.

Image: Visual comparison of items before and after ultrasonic cleaning, demonstrating the powerful cleaning effect.

7. Maintenance

Proper maintenance ensures the longevity and optimal performance of your ultrasonic cleaner.

  • Empty and Rinse Tank: After each use, unplug the unit. Lift the tank from the base and carefully pour out the dirty water. Rinse the tank with clean water.
  • Clean Tank: Wipe the inside of the stainless steel tank with a soft cloth. Do not use abrasive cleaners or scouring pads.
  • Clean Exterior: Wipe the exterior of the unit with a soft, damp cloth. Do not use excessive water or allow water to enter the control panel.
  • Storage: Ensure the unit is completely dry before storing. Store in a cool, dry place, away from direct sunlight and out of reach of children.
  • Avoid Harsh Chemicals: Do not use strong acids, alkalis, or corrosive cleaning agents in the tank, as this can damage the stainless steel.

8. Troubleshooting

If you encounter issues with your SWAREY H1 Ultrasonic Cleaner, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Unit does not power on.
  • Power cord not securely plugged in.
  • No power from outlet.
  • Unit malfunction.
  • Ensure power cord is firmly plugged into both the unit and the outlet.
  • Test the outlet with another appliance.
  • Contact customer support.
Poor cleaning results.
  • Insufficient water level.
  • Items overcrowded.
  • Incorrect cleaning mode/time.
  • Stubborn dirt requiring cleaning solution.
  • Ensure items are fully submerged.
  • Clean fewer items at a time.
  • Select a longer cleaning cycle or a more appropriate mode.
  • Add a few drops of dish soap or a specialized ultrasonic cleaning solution.
Unusual noise or vibration.
  • Unit not on a stable surface.
  • Items touching the tank walls.
  • Normal operating sound (buzzing is expected).
  • Place the unit on a firm, flat surface.
  • Ensure items are placed in the basket and not directly touching the tank.
  • If the noise is excessive or unusual, discontinue use and contact support.

9. Specifications

Model:H1
Tank Capacity:800 ml
Ultrasonic Frequency:45,000 Hz
Cleaning Tank Material:Stainless steel (SUS304)
Power Supply:AC 100-120V, 50/60Hz or AC 220-240V, 50/60Hz
Mode Control:4 mode settings (Glasses/Jewelry/Watch/Degas)
Inner Tank Size:172 x 88 x 55 mm (6.77 x 3.46 x 2.17 inches)
Outer Casing Size:216 x 137 x 121 mm (8.5 x 5.39 x 4.76 inches)
Net Weight:0.892 kg
Gross Weight (package include):1.09 kg
Diagram showing the dimensions of the SWAREY H1 Ultrasonic Cleaner tank and outer casing.

Image: Detailed dimensions of the ultrasonic cleaner's tank and external casing.

10. Warranty and Support

SWAREY products are designed and manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official SWAREY website. Please have your model number (H1) and purchase details ready when contacting support.

© 2023 SWAREY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.