HP 420 Programmable Bluetooth Mouse User Manual

Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your HP 420 Programmable Bluetooth Mouse. Please read this guide thoroughly to ensure proper use and to maximize the functionality of your device.

Product Overview

The HP 420 Programmable Bluetooth Mouse is designed for enhanced productivity and comfort. It features six programmable buttons, a 4D tilt wheel for horizontal scrolling, and multi-surface tracking with up to 4000 DPI sensitivity. This mouse connects wirelessly via Bluetooth 5.3 and Microsoft Swift Pair, allowing seamless switching between up to three devices across Windows, Mac, and Chrome operating systems. Its ergonomic design with rubber side grips ensures comfort during extended use, and quiet clicks minimize distractions. The mouse is powered by a single AA battery, offering up to 24 months of battery life, and is constructed with 65% post-consumer recycled materials in recyclable packaging.

Image: Top view of the HP 420 Programmable Bluetooth Mouse, illustrating its key features like Bluetooth 5.3, long battery life, and multi-OS compatibility.

Image: Side view of the HP 420 Programmable Bluetooth Mouse, emphasizing its ergonomic design and rubber side grips for comfortable handling.

Setup

1. Battery Installation

1. Locate the battery compartment on the underside of the mouse.
2. Slide the battery cover open.
3. Insert one AA battery, ensuring correct polarity (+/-).
4. Close the battery cover securely.
5. Turn the mouse on using the power switch located on the bottom.

2. Bluetooth Pairing

The HP 420 mouse supports pairing with up to three devices.

1. Ensure the mouse is powered on.
2. Press the Bluetooth pairing button on the top of the mouse (often indicated by a Bluetooth icon and numbers 1, 2, 3) to select an available channel (e.g., 1). The LED indicator for the selected channel will blink.
3. On your computer or device, enable Bluetooth.
4. For Windows devices, if Microsoft Swift Pair is enabled, a notification may appear to connect the mouse. Click to connect.
5. If Swift Pair does not appear or for other operating systems (Mac, Chrome), go to your device's Bluetooth settings and search for "HP 420 Programmable Bluetooth Mouse" in the list of available devices. Select it to pair.
6. Once paired, the LED indicator for the selected channel will glow solid for a few seconds, then turn off.
7. Repeat these steps to pair with up to two additional devices using channels 2 and 3.

Image: Close-up of the HP 420 mouse, showing the multi-device pairing button and channel indicators.

Operating Instructions

1. Basic Use

• Left Click: Primary selection and activation.
• Right Click: Accesses contextual menus.
• Scroll Wheel (Vertical): Scrolls content up and down.
• Scroll Wheel (4D Tilt - Horizontal): Tilting the scroll wheel left or right scrolls content horizontally.

2. Programmable Buttons

The HP 420 mouse features six programmable buttons for customized commands and shortcuts. To configure these buttons:

1. Download and install the HP Accessory Center (HPAC) Software from the Microsoft Store (for Windows) or Apple Store (for Mac).
2. Launch the HPAC software.
3. Follow the on-screen instructions to customize the functions of the six programmable buttons to suit your workflow. Common customizations include copy, paste, cut, zoom in/out, mute/unmute, and volume control.

Image: Illustration of the HP 420 mouse's programmable buttons and their potential functions.

3. Multi-Device Switching

To switch between paired devices:

• Press the Bluetooth pairing button on the top of the mouse to cycle through the paired channels (1, 2, or 3).
• The mouse will automatically connect to the selected device if it is within range and has Bluetooth enabled.

Maintenance

1. Cleaning

• Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the mouse surface.
• Avoid using harsh chemicals or abrasive materials.
• Do not immerse the mouse in water or any liquid.

2. Battery Replacement

When the mouse's performance degrades or the battery indicator (if present) signals low power, replace the AA battery:

1. Turn off the mouse using the power switch on the bottom.
2. Open the battery compartment.
3. Remove the old AA battery.
4. Insert a new AA battery, observing the correct polarity.
5. Close the battery cover and turn the mouse back on.

Troubleshooting

• Mouse not connecting:
  • Ensure the mouse is powered on and the battery is correctly installed.
  • Check that Bluetooth is enabled on your device.
  • Press the Bluetooth pairing button on the mouse to ensure it's in pairing mode or attempting to connect to the correct channel.
  • Remove the mouse from your device's Bluetooth list and attempt to re-pair.
  • Try pairing with a different device to rule out an issue with the original device's Bluetooth.
• Cursor movement is erratic or unresponsive:
  • Ensure the optical sensor on the bottom of the mouse is clean and free of debris.
  • Use the mouse on a clean, non-reflective surface. While the mouse supports multi-surface tracking, glass surfaces may affect functionality.
  • Replace the battery if it is low.
• Programmable buttons not working:
  • Ensure the HP Accessory Center (HPAC) software is installed and running.
  • Verify that the buttons have been correctly configured within the HPAC software.
  • Restart the HPAC software or your computer.

For further assistance, please refer to the HP support website.

Specifications

Image: Dimensions of the HP 420 Programmable Bluetooth Mouse.

Warranty and Support

This HP 420 Programmable Bluetooth Mouse comes with a 1-year manufacturer's warranty. For warranty claims, technical support, or additional product information, please visit the official HP support website or contact HP customer service.

What's in the Box:

• HP 420 Programmable Bluetooth Mouse
• 1 x AA Battery
• Quick Start Guide
• Warranty Card
• R.E.D. RTF Card