Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your GreenYi HD 960x720 Car Backup Camera. This camera is designed to enhance vehicle safety by providing clear rear, front, or side views with dynamic trajectory guidelines, night vision, and a waterproof design. Please read this manual thoroughly before installation and use.
Product Features
- Dynamic Trajectory Guide Lines: The camera features an advanced chip that automatically adjusts parking guidelines based on your vehicle's movement, assisting with precise parking. This feature can be disabled by cutting a specific cable.
- High Definition Imaging: Equipped with a 4089T CCD image sensor, providing 960x720 pixel resolution for clear images, even in low-light conditions (0.01 Lux).
- Adjustable Fisheye Lens: A 170-degree wide-angle fisheye lens minimizes blind spots. The camera body allows for 360-degree rotation and 45-degree vertical adjustment using the included mini wrench, ensuring an optimal viewing angle.
- IP68 Waterproof Rating: Designed for extreme conditions, the camera is fully sealed with waterproof silicon rubber and tested to ensure reliable operation in various weather environments.
- RCA Connection Compatibility: This camera is compatible with monitors that support RCA connections. For head units, a trigger wire connection is required.
The camera displays auto-adjusted trajectory guide lines on the monitor, adapting to the car's movement.
Comparison highlighting the GreenYi camera's 170-degree wide-angle view and superior 0.01 Lux night vision.
Diagram showing the camera's adjustable body, allowing for 360-degree rotation and 45-degree vertical angle adjustment with a mini wrench.
The camera is IP68 rated, ensuring reliable performance in rain, snow, and extreme temperatures.
What's in the Box
Verify that all components are present before beginning installation:
- Camera Body
- Metal Camera Holder with Accessories
- 26.2FT Double-shielded Video Cable
- 5FT 4Pin to RCA Power Cable
- Installation Kits (including mini wrench, screws, zip ties, wire clamps, electrical tape, T-tap set, mini screwdriver)
All components included in the GreenYi HD 960x720 Car Backup Camera package.
Setup and Installation
Follow these steps for proper installation of your backup camera:
- Mounting the Camera: Choose a suitable location for the camera (rear, front, or side). Use the provided metal holder and accessories to securely mount the camera. The camera's lens can be rotated 360 degrees and adjusted vertically by 45 degrees using the mini wrench to achieve the best viewing angle.
- Wiring for Head Unit (with Trigger Wire):
- Connect the camera's 4-pin connector to the video cable.
- Connect the black wire (GND) of the power cable to a vehicle ground point.
- Connect the red wire (positive) of the power cable to a 12V power source, such as the reversing light positive, brake light positive, turning light positive, or ACC (Accessory) power.
- Connect the video cable's trigger wire (C) to the head unit's trigger wire (A).
- Wiring for Monitor (without Trigger Wire):
- Connect the camera's 4-pin connector to the video cable.
- Connect the black wire (GND) of the power cable to a vehicle ground point.
- Connect the red wire (positive) of the power cable to a 12V power source (reversing light positive, brake light positive, turning light positive, or ACC).
- For normal mirror monitors or TFT monitors, the trigger detection cable is not required.
- Dynamic Trajectory Guide Line Control: To disable the dynamic trajectory guide lines, locate the green switcher cable on the camera's wiring harness and cut it. Reconnect the power supply after cutting any cable for changes to take effect. The guide lines can be re-enabled by reconnecting the cut cable if desired.
Detailed wiring diagram for connecting the camera to a head unit or a monitor.
Illustration of the double-shielded video cable structure for reliable signal transmission.
The camera includes stainless steel screws for secure and durable mounting.
Operating Instructions
Once installed, the camera operates automatically:
- Power On: The camera will activate automatically when the vehicle is put into reverse gear (if wired to the reversing light positive) or when the connected monitor is powered on.
- Viewing the Feed: The camera's video feed will display on your connected monitor or head unit.
- Dynamic Guide Lines: If the green switcher cable is intact, dynamic guide lines will appear on the screen, adjusting their curve as you steer, providing real-time parking assistance.
- Night Vision: The camera's 0.01 Lux rating ensures clear visibility in low-light conditions, enhancing safety during nighttime operation.
Video demonstrating the dynamic trajectory guide lines in action during vehicle maneuvering.
Maintenance
To ensure the longevity and optimal performance of your GreenYi Car Backup Camera, follow these maintenance guidelines:
- Cleaning: Periodically clean the camera lens with a soft, damp cloth to remove dirt, dust, or water spots that may obstruct the view. Avoid abrasive cleaners.
- Waterproof Design: The IP68 rating ensures the camera is protected against water and dust ingress. No special waterproofing maintenance is required.
- Cable Inspection: Occasionally check the wiring connections for any signs of wear, corrosion, or loose connections to ensure consistent power and video signal.
Troubleshooting
If you encounter issues with your camera, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on monitor | Loose power or video connection; incorrect wiring; monitor incompatibility. | Check all cable connections. Ensure power wires are correctly connected to 12V and ground. Verify your monitor supports RCA input. For head units, ensure the trigger wire is connected. |
| Dynamic guide lines not appearing or not moving | Green switcher cable cut; camera malfunction. | Ensure the green switcher cable is intact. If it was cut, reconnect it and cycle power. If the issue persists, contact support. |
| Image is blurry or distorted | Dirty lens; incorrect camera angle; damaged lens. | Clean the camera lens. Adjust the camera angle using the mini wrench. If the lens is damaged, contact support for replacement options. |
| Camera not powering on | No power supply; blown fuse; faulty wiring. | Check the 12V power connection and ground. Inspect the vehicle's fuse for the connected power source. Ensure all wiring is secure. |
For any issues not covered here, please refer to the user manual included in the package or contact GreenYi customer support for assistance. We typically respond within 24 hours.
Specifications
| Feature | Detail |
|---|---|
| Brand | GreenYi |
| Model Number | GreenYi-207 |
| Product Dimensions (L x W x H) | 1.26" x 1.22" x 0.94" |
| Compatible Devices | Monitor (with RCA connection) |
| Installation Type | Surface Mount, Horizontal or Vertical face |
| Voltage | 24 Volts (compatible with 12V systems via power cable) |
| Optical Sensor Technology | CCD (4089T image sensor) |
| Lens Type | Fisheye |
| Real Angle of View | 170 Degrees |
| Connector Type | 4-Pin Mini DIN, RCA |
| Optical Sensor Size | 1/3 inch |
| Effective Still Resolution | 0.69 MP |
| Lux Rating | 0.01 |
| Video Capture Resolution | 720p (960x720 Pixels) |
| Waterproof Rating | IP68 |
| Item Weight | 2.08 ounces |
Warranty and Support
GreenYi provides the following support for your product:
- Money Back Guarantee: One month money back guarantee from the date of purchase.
- Replacement Warranty: Two years new replacement warranty for manufacturing defects.
- Customer Service: Lifetime customer service and technical support.
For support or warranty claims, please contact GreenYi customer service through the platform where you purchased the product or refer to the contact information provided in the product packaging. We aim to respond to inquiries within 24 hours.