1. Introduction
This manual provides detailed instructions for the safe and effective use of your Sanyipace S8417D Sewer Camera. This device is designed for inspecting pipes, drains, and other inaccessible areas, offering clear visual feedback and recording capabilities. Please read this manual thoroughly before operation and retain it for future reference.
2. Package Contents
Verify that all items listed below are present in your package:
- Sanyipace S8417D Sewer Camera Unit (with 4.3-inch screen and 100FT/30M cable)
- Camera Probe (0.67in/17mm diameter)
- Mini Screwdriver
- 16GB TF Card (pre-installed or included separately)
- Camera Protective Cover (Small)
- Camera Protective Cover (Large)
- Power Charger
- Connection Cable
- User Manual (this document)
3. Product Features
- Compact Camera Probe: Features a 0.67in/17mm diameter lens, designed for navigating tight curves and bends in pipes, including S-Traps and P-Traps.
- Durable Construction: Equipped with an ergonomic handle for portability and a robust iron storage box to secure components. A thicker, sturdier frame enhances stability during cable retraction.
- Long-lasting Battery: A 5600mAh rechargeable battery provides up to 7 hours of continuous operation.
- High-Resolution Imaging: Integrates a 1/3 CMOS high-resolution sensor and an 8-LED 1000TVL camera for clear images in low-light conditions.
- 4.3-inch LCD Monitor: A true-color 4.3-inch LCD monitor displays clear images, aiding in the identification of pipe issues. Includes a sun visor for improved outdoor visibility.
- DVR & Audio Recording: Beyond standard video recording, the unit includes a built-in microphone and speaker for recording audio during inspections. A 16GB TF card is included for storage (supports up to 32GB).
- IP68 Waterproof: The camera probe is IP68 rated, ensuring reliable operation in wet environments.
4. Setup
- Charge the Battery: Before first use, fully charge the 5600mAh battery using the provided power charger. The charging indicator will show status.
- Connect Camera Probe: Carefully connect the camera probe to the end of the cable. Ensure the connection is secure to maintain waterproofing.
- Insert TF Card: Insert the 16GB TF card into the designated slot on the monitor unit. This is required for recording videos and capturing images.
- Attach Protective Cover (Optional): Depending on the pipe diameter, attach the appropriate small or large protective cover to the camera probe. This helps center the camera in larger pipes and protects the lens.
5. Operation
- Power On: Locate the main power switch on the unit and turn it on. Then, press the 'POWER' button on the monitor to activate the screen.
- Adjust LED Lights: Use the 'LED+' and 'LED-' buttons on the monitor to adjust the brightness of the 8 LED lights on the camera probe for optimal viewing in dark environments.
- Insert Camera: Carefully feed the camera probe into the pipe or area to be inspected. Use the cable reel to control the depth and direction.
- View and Record: Observe the live feed on the 4.3-inch monitor. To record video, press the 'OK' button. Press 'OK' again to stop recording. To capture a still image, press the 'MODE' button to switch to screenshot mode, then press 'OK'.
- Audio Recording: The built-in microphone allows for voice recording during video inspections. Ensure the microphone is clear of obstructions.
- Review Footage: After inspection, you can review recorded videos and images directly on the monitor or by transferring the TF card to a computer.
6. Maintenance
- Cleaning: After each use, clean the camera probe and cable with a damp cloth. Avoid using harsh chemicals that may damage the lens or cable material.
- Storage: Wind the cable neatly onto the reel. Store all accessories in the integrated storage box. Ensure the unit is powered off before storing.
- Battery Care: For long-term storage, charge the battery to approximately 50% and store in a cool, dry place. Recharge every 3-6 months to maintain battery health.
- Waterproof Seals: Periodically inspect the waterproof seals on the camera probe and connections for any signs of wear or damage. Replace if necessary to maintain IP68 rating.
7. Troubleshooting
- No Image on Screen:
- Ensure the main power switch and the monitor's 'POWER' button are both on.
- Check if the camera probe is securely connected to the cable.
- Verify the battery is charged.
- Poor Image Quality:
- Adjust the LED light brightness using 'LED+' and 'LED-'.
- Clean the camera lens if it appears dirty or foggy.
- Ensure the camera is centered in the pipe using the appropriate protective cover.
- Cannot Record/Capture Images:
- Check if the TF card is properly inserted.
- Ensure the TF card has sufficient free space.
- Verify the unit is in the correct recording or screenshot mode.
- Unit Not Powering On:
- Confirm the battery is fully charged.
- Check all power connections.
8. Specifications
| Model Number | S8417D-30M-CA |
| Camera Diameter | 0.67in / 17mm |
| Cable Length | 100FT / 30M |
| Battery Capacity | 5600mAh |
| Continuous Working Time | Up to 7 hours |
| Screen Size | 4.3 inches |
| Camera Resolution | 1000TVL |
| Video Capture Resolution | 720p |
| LED Lights | 8 adjustable LEDs |
| Waterproof Rating | IP68 (Camera Probe) |
| Media Type | Micro SD Card (16GB included, supports up to 32GB) |
| Item Weight | 11.88 pounds |
| Package Dimensions | 14 x 12 x 11 inches |
9. Warranty and Support
Sanyipace products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase documentation or visit the official Sanyipace website. Please retain your proof of purchase for warranty claims.