Ibergrif Bidet Attachment User Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Ibergrif M41050 non-electric bidet attachment. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Product Overview

The Ibergrif M41050 is a non-electric bidet attachment designed for easy integration with most standard toilets. It features a dual retractable nozzle system and adjustable cold water pressure for personalized cleaning.

• High-Quality Construction: Made from durable ABS material with a stainless steel T-adapter and hose for long-lasting performance.
• Dual Retractable Nozzles: Includes two nozzles for different cleaning modes.
• Three Cleaning Modes:
  • Nozzle Self-Cleaning: For maintaining nozzle hygiene.
  • Rear Wash: For general posterior cleaning.
  • Front (Feminine) Wash: For gentle feminine hygiene.
• Adjustable Water Pressure: Control the water spray intensity for comfort.
• Non-Electric Design: Operates solely on water pressure, requiring no electricity.
• Cold Water Only: This model provides cold water spray.

Image: The ultra-slim design of the Ibergrif M41050 bidet attachment, highlighting its minimal thickness for seamless toilet integration.

Image: Close-up of the control knob, illustrating the different cleaning modes: Rear, Front, and Nozzle Cleaning.

Safety Information

• Ensure all connections are tight to prevent leaks.
• Do not use excessive force when operating the control knob.
• This bidet uses cold water only. Do not attempt to connect to a hot water supply unless specifically designed for it.
• Regularly inspect hoses and connections for wear or damage.
• Keep out of reach of small children when not in use, or supervise during use.

Package Contents

Verify that all components are present before beginning installation:

• Ibergrif Bidet Attachment (M41050)
• T-Adapter
• Stainless Steel Hose
• Mounting Accessories (washers, seals, etc.)
• User Manual

Image: All included components for the Ibergrif M41050 bidet attachment, laid out for inspection.

Setup and Installation

The Ibergrif M41050 bidet attachment is designed for easy, non-electric installation. Follow these steps:

1. Turn off Water Supply: Locate the water shut-off valve for your toilet and turn it clockwise until the water flow stops. Flush the toilet to drain the tank.
2. Remove Toilet Seat: Unscrew the bolts holding your current toilet seat to the toilet bowl. Keep the bolts and nuts as they will be reused.
3. Position Bidet Attachment: Place the bidet attachment on the toilet bowl, aligning the mounting holes with the holes on the toilet bowl. Adjust its position to ensure the nozzles are centered and clear.
4. Reinstall Toilet Seat: Place your toilet seat back over the bidet attachment and secure it with the original bolts and nuts. Ensure the bidet is firmly in place.
5. Connect T-Adapter: Disconnect the existing water supply hose from the toilet tank's fill valve. Connect the T-adapter to the fill valve.
6. Connect Water Supply: Connect the original water supply hose to the bottom of the T-adapter.
7. Connect Bidet Hose: Connect one end of the provided stainless steel bidet hose to the side of the T-adapter and the other end to the water inlet on the bidet attachment.
8. Check for Leaks: Slowly turn the water supply valve counter-clockwise to restore water flow. Check all connections for any leaks. Tighten gently if necessary.
9. Test Functionality: Once installed, test the bidet's functions as described in the Operating Instructions section.

Image: The Ibergrif M41050 bidet attachment correctly installed on a toilet, with the water supply hose connected.

Operating Instructions

The bidet is operated using the control knob located on the side panel.

1. Select Cleaning Mode: Rotate the control knob to select your desired cleaning mode:
   • "REAR" Mode: For posterior cleaning.
   • "FRONT" Mode: For feminine cleaning.
   • "NOZZLE CLEANING" Mode: For self-cleaning the nozzles.
2. Adjust Water Pressure: Continue rotating the knob in the selected mode's direction to increase water pressure. Rotate back towards "OFF" to decrease pressure.
3. Turn Off: Rotate the knob back to the "OFF" position to stop the water flow. The nozzles will retract automatically.

Note: This bidet provides cold water spray only. The water pressure is adjustable to suit individual comfort levels.

Image: A hand demonstrating the operation of the bidet's control knob to select modes and adjust water pressure.

Image: The bidet nozzle extended and spraying water for the Rear Wash mode.

Image: The bidet nozzle extended and spraying water for the Front (Feminine) Wash mode.

Image: The bidet nozzle undergoing its self-cleaning process, with water spraying downwards.

Maintenance

• Nozzle Cleaning: Regularly use the "NOZZLE CLEANING" mode to rinse the nozzles. For a more thorough cleaning, gently wipe the nozzles with a soft cloth and mild soap when they are extended (e.g., by partially turning the knob to a wash mode while the water supply is off).
• Exterior Cleaning: Clean the exterior of the bidet attachment with a soft, damp cloth and mild, non-abrasive cleaner. Avoid harsh chemicals that could damage the finish.
• Leak Inspection: Periodically check all water connections for any signs of leaks. Tighten connections gently if needed.
• Winterization (if applicable): If the bidet is in an unheated area subject to freezing temperatures, disconnect the water supply and drain the bidet to prevent damage from freezing water.

Troubleshooting

Specifications

Image: Technical drawing showing the precise dimensions of the Ibergrif M41050 bidet attachment.

Warranty and Support

Ibergrif products are manufactured with quality and durability in mind. For warranty information, technical support, or to inquire about replacement parts, please contact Ibergrif customer service directly. Refer to the product packaging or the official Ibergrif website for contact details.

Note: Availability of spare parts is not specified in the product information.