1. Introduction
This manual provides essential information for the safe and effective use of your Satco S12465 A19 LED bulbs. These 8-watt LED bulbs are designed as a 60-watt incandescent equivalent, offering 800 lumens of 5000K daylight white light with an E26 medium base. They are suitable for various indoor applications, including residential, hospitality, retail, and educational institutions.
Image 1.1: Satco S12465 A19 LED bulbs, showing the product and its packaging.
2. Safety Information
- WARNING: To avoid electric shock, always turn off power to the fixture at the circuit breaker or fuse box before installation, removal, or inspection.
- Do not use with dimmers unless explicitly stated as compatible. (Note: This product is indicated as dimmable in product imagery.)
- Do not use in totally enclosed fixtures as this may shorten bulb life.
- Not for use in emergency exit fixtures or emergency lights.
- Avoid direct exposure to water or excessive moisture. This product is rated for damp locations.
- Dispose of bulbs according to local regulations.
3. Setup
Follow these steps to install your Satco S12465 A19 LED bulb:
- Ensure Power is Off: Before beginning installation, verify that the power supply to the light fixture is turned off at the circuit breaker or wall switch.
- Remove Old Bulb: Carefully unscrew the existing bulb from the light fixture. Allow it to cool if it has been recently in use.
- Install New LED Bulb: Gently screw the Satco S12465 LED bulb into the E26 medium base socket until it is snug. Do not overtighten.
- Restore Power: Turn the power back on at the circuit breaker or wall switch.
- Test: Turn on the light switch to confirm the bulb is functioning correctly.
Image 3.1: Key features of the Satco S12465 LED bulb, highlighting Energy Star certification, 15,000-hour lifespan, suitability for damp locations, and dimmable functionality.
4. Operating Instructions
The Satco S12465 A19 LED bulb operates like a standard light bulb. Once installed and power is restored, simply use the wall switch or fixture control to turn the light on or off.
- Dimming: If connected to a compatible dimmer switch, you can adjust the brightness level of the bulb. Ensure your dimmer is rated for LED bulbs to prevent flickering or damage.
- Color Temperature: These bulbs provide a 5000K daylight white light, offering a bright and crisp illumination suitable for task lighting and areas where high visibility is desired.
Image 4.1: A visual reference for color temperatures, indicating that the Satco S12465 provides 5000K Daylight illumination.
5. Maintenance
These LED bulbs require minimal maintenance.
- Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Replacement: Due to their long lifespan (up to 15,000 hours), frequent replacement is not typically necessary. When replacement is required, follow the 'Setup' instructions in reverse.
6. Troubleshooting
If you encounter issues with your Satco S12465 LED bulb, consider the following common solutions:
- Bulb Does Not Light:
- Check that the power switch is on.
- Ensure the bulb is screwed in securely into the socket.
- Verify that the circuit breaker has not tripped.
- Test the bulb in another working fixture to rule out a faulty fixture.
- Bulb Flickers:
- If using a dimmer, ensure it is compatible with LED bulbs. Some older dimmers may cause flickering.
- Check for loose connections in the fixture or wiring.
- Ensure the voltage supply is stable (100-120V, 60Hz).
- Light Output is Low:
- If using a dimmer, ensure it is set to maximum brightness.
- Confirm the bulb is the correct wattage and lumen output for your needs.
7. Specifications
Image 7.1: Visual representation of key specifications and lighting facts for the Satco S12465 LED bulb.
| Specification | Detail |
|---|---|
| Brand | Satco |
| Model Number | S12465 |
| Light Type | LED |
| Special Feature | Energy Efficient, Dimmable |
| Wattage | 8 watts |
| Bulb Shape Size | A19 |
| Bulb Base | E26 Medium |
| Incandescent Equivalent Wattage | 60 Watts (as per image, 24 Watts as per spec list, using 60W as it's more common for 8W LED) |
| Light Color | Daylight White |
| Color Temperature | 5000 Kelvin |
| Brightness | 800 lumens |
| Indoor/Outdoor Usage | Indoor (Damp Location Rated) |
| Power Source | Corded Electric |
| Accepted Voltage Frequency | 100 to 120 Volts and 60 Hertz |
| Lifetime | 15,000 Hours |
| Product Dimensions | 2.44 x 2.44 x 5.12 inches |
| Item Weight | 1.5 pounds (for 8 bulbs) |
| Item Package Quantity | 8 bulbs total (often sold in 4-packs) |
8. Warranty and Support
For warranty information and customer support, please refer to the official Satco website or contact their customer service department. Keep your purchase receipt as proof of purchase.
For further assistance, visit the Satco website.
