Product Overview
The ENEGON AA AAA Battery Charger is an advanced, intelligent 8-bay charging solution designed for Ni-MH and Ni-CD rechargeable batteries. It features independent charging slots, allowing you to charge 1 to 8 batteries simultaneously or individually. With a fast charging current of up to 1000mA, it can fully charge batteries in less than 5 hours. The integrated intelligent LCD display provides real-time charging status for each battery, ensuring you are always informed.
This charger incorporates smart auto cut-off technology, which automatically stops charging when batteries reach full capacity, preventing overcharging and extending battery life. Additionally, it includes multiple safety protections such as over-voltage, over-current, short-circuit, high-temperature, and over-charge protection, ensuring safe and reliable operation.
Image: The ENEGON 8-Bay AA AAA Battery Charger, shown with its detachable power cord.
Key Features
- Independent 8-Bay Charging: Charge 1 to 8 AA or AAA Ni-MH/Ni-CD batteries independently or simultaneously.
- Fast Charging: Delivers up to 1000mA charging current, fully charging batteries in under 5 hours.
- Intelligent LCD Display: Provides real-time charging status for each individual battery.
- Smart Auto Cut-off: Automatically stops charging when batteries are full, preventing overcharge.
- Comprehensive Safety Protections: Includes protection against over-voltage, over-current, short-circuit, high-temperature, and over-charge.
- Universal Voltage Input: Compatible with AC100-240V 50/60Hz power sources.
Image: The intelligent LCD display showing real-time charging status for each battery.
Image: Illustration of the smart auto cut-off feature, preventing overcharging.
Setup Guide
- Unpack the Charger: Carefully remove the ENEGON battery charger and AC power adapter from its packaging.
- Connect Power Adapter: Insert the small end of the AC power adapter cable into the power input port on the side of the charger.
- Plug into Power Outlet: Plug the other end of the AC power adapter into a standard AC100-240V 50/60Hz wall outlet. The LCD display on the charger will illuminate briefly, indicating it is ready for use.
Image: The charger and its power adapter, ready for connection to a power source.
Operating Instructions
- Insert Batteries: Place 1 to 8 AA or AAA Ni-MH/Ni-CD rechargeable batteries into the charging slots. Ensure the positive (+) and negative (-) terminals of the batteries align correctly with the markings in the charger slots. Incorrect insertion can damage the battery or charger.
- Monitor Charging Status: The intelligent LCD display will show the charging status for each inserted battery.
- CHG: Indicates the battery is currently charging. The battery icon will show segments filling up.
- FULL: Indicates the battery is fully charged. The battery icon will be completely filled.
- ERR: Indicates an error, such as a non-rechargeable battery, short-circuit, or damaged battery. Remove the battery immediately.
- DCHG: (If applicable, not explicitly mentioned for this model but common for smart chargers) Indicates discharge mode.
- Automatic Cut-off: The charger will automatically stop charging each battery once it reaches full capacity, indicated by "FULL" on the LCD.
- Remove Batteries: Once charging is complete, carefully remove the batteries from the charger. Unplug the charger from the power outlet when not in use.
Image: The charger with multiple AA batteries inserted, demonstrating independent charging and LCD status display.
Safety Precautions
To ensure safe operation and prolong the life of your charger and batteries, please observe the following precautions:
- Only charge Ni-MH and Ni-CD rechargeable batteries. Do not attempt to charge alkaline, carbon-zinc, or other non-rechargeable battery types, as this may lead to leakage, rupture, or explosion.
- Ensure correct polarity (+/-) when inserting batteries.
- Do not disassemble or modify the charger.
- Avoid exposing the charger to water, high humidity, or extreme temperatures.
- Do not operate the charger if it appears damaged.
- Keep the charger away from children and pets.
- Unplug the charger from the power outlet when not in use or during cleaning.
- The charger is equipped with multiple safety features including over-voltage, over-current, short-circuit, high-temperature, and over-charge protection. If an error is detected, the charger will automatically cut off power to the affected slot.
Image: Visual representation of the multiple safety protections integrated into the charger, including over-voltage, over-current, short-circuit, high-temperature, and over-charge protection.
Maintenance
- Cleaning: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the surface of the charger. Do not use liquid cleaners or abrasive materials.
- Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Terminals: Periodically check the battery terminals in the charging slots for any dust or debris and clean them gently if necessary to ensure good contact.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not powering on. | No power from outlet; power adapter not connected properly; damaged power adapter. | Check wall outlet with another device. Ensure power adapter is securely connected to both charger and outlet. Try a different compatible power adapter if available. |
| Battery not charging (LCD shows "ERR"). | Incorrect battery type (non-rechargeable); battery inserted incorrectly (polarity); short-circuited or damaged battery. | Ensure only Ni-MH/Ni-CD batteries are used. Verify correct polarity. Remove and reinsert the battery. If "ERR" persists, the battery may be faulty and should be replaced. |
| Charging takes too long. | High capacity batteries; charger operating in a very cold environment. | Charging time varies with battery capacity. Ensure charger is used within recommended temperature range (typically room temperature). |
| LCD display is dim or flickering. | Unstable power supply; charger malfunction. | Try plugging the charger into a different power outlet. If the issue persists, contact customer support. |
Technical Specifications
| Feature | Detail |
|---|---|
| Brand | ENEGON |
| Model | 8-Bay Ni-MH Ni-CD Battery Charger |
| Compatible Battery Types | AA, AAA Ni-MH, Ni-CD Rechargeable Batteries |
| Input Voltage | AC 100-240V, 50/60Hz |
| Charging Current | Up to 1000mA per slot |
| Approx. Charging Time | Less than 5 hours (for full charge, depending on battery capacity) |
| Product Dimensions | 14 x 19.3 x 3.7 cm |
| Item Weight | 288 g |
| Safety Protections | Over-voltage, Over-current, Short-circuit, High-temperature, Over-charge, Non-rechargeable battery detection |
Warranty and Customer Support
ENEGON provides comprehensive support for its products:
- Warranty: This product is covered by a 12-month warranty from the date of purchase.
- Refund Policy: A 3-month refund period is offered for eligible returns.
- Customer Support: For any inquiries, technical assistance, or warranty claims, please contact ENEGON customer support. Our team is available 24 hours to ensure your satisfaction.
Please retain your proof of purchase for warranty service.
