1. Introduction
Thank you for choosing the KOORUI 24-inch FHD Monitor, Model P01. This manual provides essential information for setting up, operating, and maintaining your monitor. Please read this manual thoroughly before use to ensure proper functionality and to maximize your viewing experience.
Package Contents
- KOORUI 23.8-inch Monitor with Stand x1
- HDMI Cable x1
- Power Adapter x1
- User Manual x1
2. Safety Information
Observe the following safety precautions to prevent damage to the monitor and ensure user safety:
- Place the monitor on a stable, flat surface to prevent it from falling.
- Ensure adequate ventilation around the monitor. Do not block ventilation openings.
- Use only the power adapter supplied with the monitor.
- Do not expose the monitor to rain or moisture to avoid electric shock or fire.
- Keep the monitor away from direct sunlight, heat sources, and extreme temperatures.
- Unplug the power cord from the outlet before cleaning the monitor.
- Do not attempt to repair the monitor yourself. Refer all servicing to qualified personnel.
3. Setup
3.1 Assembling the Stand
- Carefully remove the monitor and stand components from the packaging.
- Attach the stand base to the stand neck, securing it with the provided screw.
- Align the assembled stand with the mounting slot on the back of the monitor and push firmly until it clicks into place.
3.2 Connecting Cables
Connect the necessary cables to the corresponding ports on the monitor and your computer.
- Power: Connect the power adapter to the monitor's power input and then to a power outlet.
- HDMI: Connect one end of the HDMI cable to the monitor's HDMI port and the other end to your computer's HDMI output.
- VGA: Connect one end of the VGA cable to the monitor's VGA port and the other end to your computer's VGA output.
- Audio: If using external speakers or headphones, connect them to the monitor's audio output port. The monitor also has built-in speakers.
3.3 VESA Mounting
The KOORUI P01 monitor supports 75mm x 75mm VESA mounting standards, allowing you to attach it to a compatible wall mount or desk arm (sold separately).
- Ensure the monitor is powered off and unplugged.
- Carefully remove the stand from the monitor by pressing the release button or unscrewing if applicable.
- Attach your VESA-compatible mount to the four screw holes on the back of the monitor using appropriate screws (typically M4 x 10mm, check your mount's instructions).
- Follow the instructions provided with your VESA mount for installation.
4. Operating the Monitor
4.1 Power On/Off
Press the power button, usually located on the bottom right bezel of the monitor, to turn the monitor on or off. The power indicator light will illuminate when the monitor is on.
4.2 On-Screen Display (OSD) Menu
The OSD menu allows you to adjust various monitor settings. Use the buttons on the bottom right bezel to navigate the menu.
- Press the 'M' button to open the OSD menu.
- Use the directional buttons (usually arrows or '◄'/'►') to navigate through menu options.
- Press the 'E' button (or similar) to select an option or confirm a setting.
- Press the 'X' button (or similar) to exit the menu or go back to the previous level.
4.3 Adjusting Settings
Within the OSD menu, you can modify settings such as:
- Brightness/Contrast: Adjust the overall luminance and contrast levels of the display.
- Color Settings: Modify color temperature, gamma, and individual RGB values for precise color calibration.
- Input Source: Manually select between HDMI and VGA input signals.
- Audio: Control the volume of the built-in speakers or connected audio devices.
- Scenario Mode: Select preset display modes optimized for different content (e.g., Standard, Game, Movie, Text).
4.4 Tilt Adjustment
The monitor stand allows for tilt adjustment. You can tilt the screen approximately 5 degrees forward and 15 degrees backward to find your optimal viewing angle.
4.5 Built-in Speakers
The monitor is equipped with two built-in speakers for audio output. Adjust the volume through the OSD menu or your computer's sound settings.
4.6 FreeSync Technology
This monitor supports FreeSync technology, which synchronizes the monitor's refresh rate with your graphics card's frame rate. This helps eliminate screen tearing and stuttering, providing a smoother gaming experience. Ensure FreeSync is enabled in your graphics card settings and the monitor's OSD menu if available.
4.7 Blue Light Filter
The monitor features a Blue Light Filter to reduce eye strain during prolonged use. This setting can typically be adjusted or enabled within the OSD menu's color settings.
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your monitor.
- Cleaning the Screen: Gently wipe the screen with a soft, lint-free cloth. For stubborn marks, lightly dampen the cloth with water or a screen-specific cleaning solution. Do not spray liquid directly onto the screen.
- Cleaning the Casing: Use a soft, dry cloth to wipe the monitor casing. Avoid using abrasive cleaners, waxes, or solvents as they may damage the finish.
- Power Off: Always unplug the monitor from the power outlet before cleaning.
6. Troubleshooting
If you encounter issues with your monitor, refer to the following common problems and solutions:
| Problem | Possible Solution |
|---|---|
| No power | Ensure the power cable is securely connected to the monitor and a working power outlet. Check if the power adapter is functioning. |
| No signal | Verify that the video cable (HDMI/VGA) is securely connected to both the monitor and your computer. Select the correct input source via the OSD menu. Ensure your computer is powered on and not in sleep mode. |
| Image is blurry or distorted | Check your computer's display settings to ensure the resolution is set to 1920 x 1080 pixels and the refresh rate is 100Hz. Adjust the monitor's OSD settings (e.g., sharpness, phase, clock). |
| No sound from built-in speakers | Increase the volume in the monitor's OSD menu and your computer's sound settings. Ensure the audio output is correctly configured on your computer. |
| Screen flickering | Check the video cable for damage or loose connections. Ensure the refresh rate is set correctly. If using FreeSync, try disabling it temporarily to see if the issue persists. |
7. Specifications
Technical specifications for the KOORUI 24-inch FHD Monitor P01:
| Feature | Specification |
|---|---|
| Model Number | P01 |
| Screen Size | 23.8 Inches |
| Resolution | 1920 x 1080 Pixels (FHD 1080p) |
| Refresh Rate | 100 Hz |
| Response Time | 5ms (GTG) |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Color Gamut | sRGB 99% |
| Viewing Angle | 178° (Horizontal/Vertical) |
| Panel Type | VA |
| Connectivity | 1x HDMI 1.4, 1x VGA, 1x Audio Out |
| Speakers | Built-in (x2) |
| VESA Mount | 75mm x 75mm |
| Tilt Adjustment | -5° to +15° |
| Product Dimensions (with stand) | 7.13 x 21.34 x 16.59 inches |
| Item Weight (with stand) | 8.53 pounds |
| Screen Surface | Matte |
8. Warranty and Support
KOORUI provides comprehensive support for its products.
- Warranty: This monitor is covered by a 3-year warranty from the date of purchase.
- Replacement Service: A 12-month replacement service is offered for eligible issues.
- Customer Support: 24-hour support is available for assistance.
For warranty claims, technical assistance, or any other inquiries, please contact KOORUI customer service through the retailer where you purchased the product or visit the official KOORUI website for contact details.
