QIACHIP DC 5.5-24V

Download PDF
Contents

QIACHIP Mini Wireless Remote Control Switch DC 5.5-24V User Manual

Model: DC 5.5-24V

Introduction

This manual provides detailed instructions for the installation, setup, and operation of your QIACHIP Mini Wireless Remote Control Switch. This device is designed for various applications requiring remote control of DC-powered systems, such as LED lights, car batteries, garage doors, and other electronic devices. Please read this manual thoroughly before use to ensure proper functionality and safety.

QIACHIP Mini Wireless Remote Control Switch with two remotes and two receivers

Image: Two QIACHIP wireless remote controls and two receiver modules, illustrating the complete product package.

Product Overview and Features

The QIACHIP Mini Wireless Remote Control Switch operates on a 433 MHz frequency, offering reliable wireless control. It features a compact design and supports a wide range of DC input voltages.

  • Frequency: 433 MHz universal wireless.
  • Input Voltage: DC 5.5V to 24V (some versions may support 5V to 60V).
  • Working Mode: Superheterodyne for stable reception.
  • Transmission Distance: Approximately 50-100 meters in open spaces.
  • Remote Control Compatibility: Supports EV1527 learning code remote controls, up to 20 remotes.
  • Output Terminals: Normally Open (NO), Normally Closed (NC), Common (COM).
  • Function Modes: Momentary, Toggle, Latched, and Delay.
QIACHIP Remote Switch with exposed antenna and wider voltage range

Image: A close-up of the receiver module highlighting the exposed antenna for improved reception and indicating a wider voltage range (5.5-24V to 5-60V) for newer versions.

Specifications

ParameterValue
Input VoltageDC 5.5V - 24V (Some versions support DC 5V - 60V)
Max Relay Contact Current20 Amps
RF Frequency433 MHz
PCB Dimensions (L x W x H)47 x 26 x 18 mm
Output TerminalsNO (Normally Open), NC (Normally Closed), COM (Common)
Control MethodRemote Wireless
Remote Battery Type2 x CR2032 (included)
Dimensions of the QIACHIP remote switch receiver

Image: Diagram showing the physical dimensions of the receiver module: 30mm (1.2in) width, 51mm (2.0in) length, and 21mm (0.8in) height for the main body.

Setup and Wiring

Component Identification

Familiarize yourself with the components of the receiver module before proceeding with wiring.

Internal components of the QIACHIP receiver module

Image: An overhead view of the receiver's circuit board, labeling key components such as the learning button, indicator lamp, relay, receiving module, antenna, and output terminals (NO, COM, NC), along with the DC 5.5V-24V input terminals.

Wiring Diagrams

Ensure all power is disconnected before attempting any wiring. Connect the receiver according to your specific application using the appropriate diagram below.

Wiring diagram for DC load with QIACHIP remote switch

Image: Wiring diagram for connecting a DC load (e.g., an LED light) to the QIACHIP receiver. The diagram shows the DC 5.5-24V power input connected to V+ and V-, and the load connected between NO (Normally Open) and COM (Common) terminals, with the other side of the load connected to the positive power supply.

Wiring diagram for access control or door lock with QIACHIP remote switch

Image: Wiring diagram for an access control or door lock application. The diagram illustrates connecting the receiver to a button and a door lock, powered by a DC 5.5-24V source.

Wiring diagram for external power supply load with QIACHIP remote switch

Image: Wiring diagram for controlling a load with an external power supply. This setup shows the receiver's input connected to a DC 5.5-24V source, while the load is powered by a separate 1V-250V AC/DC source, connected through the NO/COM/NC terminals of the relay.

Operating Modes and Pairing

The QIACHIP remote control switch supports four operating modes. Follow the instructions below to pair your remote control and set the desired mode.

Resetting the Receiver

To clear all previously paired remote controls, press the learning button on the receiver module 8 times continuously. The indicator light will flash seven times and then turn off, indicating a successful reset.

Location of the learning button on the QIACHIP receiver

Image: A close-up view of the QIACHIP receiver module, clearly indicating the location of the learning button.

Pairing and Mode Selection

1. Momentary Mode

In Momentary mode, the relay activates only while the remote button is pressed. Releasing the button deactivates the relay.

  1. Press the learning button on the module 1 time. The indicator light will turn on.
  2. Press the desired button on the remote control. The indicator light will flash 3 times and then turn off.
  3. Pairing is successful. If no code is received within 15 seconds, the indicator light will turn off, exiting the learning state.
Diagram illustrating Momentary mode operation

Image: Diagram showing Momentary mode: Press and hold button A to turn ON, release button A to turn OFF.

2. Toggle Mode

In Toggle mode, each press of the remote button alternates the relay state (ON/OFF).

  1. Press the learning button on the module 2 times. The indicator light will turn on.
  2. Press the desired button on the remote control. The indicator light will flash 3 times and then turn off.
  3. Pairing is successful. If no code is received within 15 seconds, the indicator light will turn off, exiting the learning state.
Diagram illustrating Toggle mode operation

Image: Diagram showing Toggle mode: Press button A to turn ON, press button A again to turn OFF.

3. Latched Mode

In Latched mode, one button turns the relay ON, and another button turns it OFF. This requires a remote with at least two buttons (e.g., A and B).

  1. Press the learning button on the receiver 3 times. The indicator light will turn on.
  2. Press the first button (e.g., 'A') on the remote control. The indicator light will flash and then stay on.
  3. Press the second button (e.g., 'B') on the remote control. The indicator light will turn off.
  4. Pairing is successful.
Diagram illustrating Latched mode operation

Image: Diagram showing Latched mode: Press button A to turn ON, press button B to turn OFF.

4. Delay Mode

In Delay mode, the relay activates for a set duration after the remote button is pressed, then automatically turns off.

  1. Press the learning button on the receiver a specific number of times for the desired delay:
    • 4 times: 5-second delay
    • 5 times: 10-second delay
    • 6 times: 15-second delay
    • 7 times: 20-second delay
    The indicator light will turn on.
  2. Press the desired button on the remote control. The indicator light will turn off after successful pairing.
  3. The relay will activate for the set delay time after the remote button is pressed.
Diagram illustrating Delay mode operation

Image: Diagram showing Delay mode: Press button A to start countdown, then automatically OFF after 5s/10s/15s (depending on setting).

Maintenance

  • Cleaning: Use a dry, soft cloth to clean the receiver and remote control. Avoid using liquids or abrasive cleaners.
  • Battery Replacement: The remote control uses two CR2032 batteries. If the remote's range decreases significantly or it stops responding, replace the batteries. Ensure correct polarity when inserting new batteries.
  • Antenna: For optimal reception, ensure the receiver's antenna is not obstructed. If reception is poor, consider extending the internal antenna outside the receiver casing if possible, as shown in some product images.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

ProblemPossible CauseSolution
Receiver does not respond to remote.
  • Remote not paired.
  • Remote battery is low or dead.
  • Receiver not powered.
  • Interference.
  • Perform pairing procedure for the desired mode.
  • Replace remote batteries (CR2032).
  • Check power connections to the receiver.
  • Move receiver or remote away from sources of interference.
Short remote control range.
  • Obstructions between remote and receiver.
  • Weak remote battery.
  • Receiver antenna obstructed or not optimized.
  • Ensure clear line of sight or minimize obstructions.
  • Replace remote batteries.
  • Ensure receiver antenna is fully extended and unobstructed. Consider pulling the antenna outside the casing if possible.
Relay does not switch or load does not activate.
  • Incorrect wiring.
  • Load requires more current than relay can handle.
  • Faulty load.
  • Review wiring diagrams and ensure connections are correct.
  • Verify load current draw does not exceed 20 Amps.
  • Test the load independently to ensure it is functional.
Illustration of remote control range within a house layout

Image: An overhead floor plan illustrating the typical remote control range of 50-100 meters, showing how the signal can travel through walls but is optimized in open spaces.

Warranty and Support

For warranty information or technical support, please refer to the product's purchase platform or contact QIACHIP customer service directly. Keep your purchase receipt for warranty claims.

Manufacturer: QIACHIP

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.