User Manual for DJXFLI 60W RGBW Moving Head Stage Light

1. Introduction

This user manual provides detailed instructions for the safe and effective operation of your DJXFLI 60W RGBW Moving Head Stage Light. This professional lighting fixture is designed to enhance various events with its versatile beam and halo effects, offering multiple control modes for dynamic lighting displays.

Figure 1.1: Front view of the DJXFLI 60W RGBW Moving Head Stage Light, showcasing its main lens and halo ring.

2. Safety Information

Please read all safety warnings and instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Ensure the power supply voltage matches the product's requirements (175 Volts).
• Do not expose the device to rain or moisture.
• Always disconnect from power before cleaning or servicing.
• Maintain a minimum distance of 0.5 meters from flammable materials.
• The external surface temperature can reach 150°C; avoid direct contact during operation.
• Only qualified personnel should perform repairs.

3. What's in the Box

Upon unpacking, please verify that all components listed below are included and in good condition:

• One (1) DJXFLI 60W RGBW Moving Head Stage Light
• One (1) Power Cable
• One (1) User Manual
• One (1) DMX Cable
• One (1) Bow Mount
• Two (2) Screws

Figure 3.1: Image showing the stage light, power cable, DMX cable, bow mount, screws, and user manual included in the package.

4. Product Features

The DJXFLI 60W RGBW Moving Head Stage Light is equipped with advanced features for professional lighting applications:

• Powerful Illumination: Features a 60W RGBW LED for vibrant color mixing and a bright beam.
• Halo Effect: Integrated SMD 5050 RGB 3-in-1 LED halo ring provides additional visual effects.
• Flexible Control Modes: Supports Auto, Sound Activated, DMX 512, and Master-Slave modes.
• Wide Movement Range: Horizontal scan (Pan) of 540° and vertical tilt (Tilt) of 180° for dynamic positioning.
• Precise Beam Angle: A narrow 4° beam angle for sharp, focused light effects.
• Strobe Function: Adjustable strobe rate of 15 flashes per second.
• User-Friendly Interface: Equipped with a 4-button control panel and LED display for easy navigation and settings adjustment.
• Memory Function: Retains last operation settings after power cycle.

Figure 4.1: Illustration of the light's 540° horizontal pan and 180° vertical tilt capabilities.

Figure 4.2: Visual representation of the 60W RGBW beam combined with the SMD 5050 RGB 3-in-1 LED halo effect.

5. Setup

5.1 Physical Installation

The moving head light can be placed on a flat surface or mounted to a truss using the provided bow mount and screws. Ensure the mounting surface or truss is capable of supporting the weight of the fixture.

• Securely attach the bow mount to the bottom of the fixture using the two screws.
• If mounting to a truss, use appropriate clamps (not included) to attach the bow mount to the truss. Ensure all connections are tight and secure.
• Maintain adequate ventilation around the fixture to prevent overheating.

5.2 Electrical Connection

Connect the provided power cable to the "POWER IN" port on the back of the fixture and then to a suitable power outlet (175V AC).

Figure 5.1: Back panel of the light, highlighting the DMX IN, DMX OUT, and Power IN connections.

5.3 DMX Connection (Optional)

For DMX control, connect a DMX cable from your DMX controller's output to the "DMX IN" port on the fixture. For multiple fixtures, daisy-chain them by connecting the "DMX OUT" of the first fixture to the "DMX IN" of the next.

6. Operating Modes

The DJXFLI Moving Head Light offers four primary operating modes:

6.1 Control Panel Operation

The control panel on the front of the base features an LED display and four buttons: MENU, DOWN, UP, and ENTER. Use these buttons to navigate through settings and select operating modes.

Figure 6.1: Detailed view of the control panel and its buttons.

6.2 Auto Mode

In Auto mode, the fixture runs through its 8 internal pre-programmed light shows automatically. This mode is ideal for quick setup without external control.

• Press the MENU button until "Auto" or a similar indicator appears on the LED display.
• Press ENTER to confirm. The light will begin its automatic program.

6.3 Sound Activated Mode

The Sound Activated mode allows the light to react to ambient sound, creating dynamic effects synchronized with music or audio. The sensitivity can often be adjusted via the menu.

• Press the MENU button until "Sound" or "Snd" appears.
• Press ENTER to activate. The built-in microphone will detect sound and trigger light patterns.

6.4 DMX 512 Mode

DMX 512 mode provides professional control over all functions of the light using a DMX controller. The fixture supports 16/30 DMX channels.

• Connect the DMX cable as described in Section 5.3.
• Press the MENU button until "DMX" or "Addr" appears.
• Use UP/DOWN to set the DMX address (e.g., A001). Press ENTER to confirm.
• Refer to the DMX Channel Chart (usually provided in a separate DMX manual or appendix) for specific channel functions.

6.5 Master-Slave Mode

In Master-Slave mode, multiple fixtures can be synchronized. One fixture acts as the "Master" (running Auto or Sound mode), and others act as "Slaves," mirroring the Master's actions.

• Connect all fixtures via DMX cables in a daisy-chain.
• Set the first fixture (Master) to Auto or Sound Activated mode.
• Set all other fixtures (Slaves) to "Slave" mode via their control panels.

7. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your moving head light.

7.1 Cleaning

• Always disconnect power before cleaning.
• Use a soft, lint-free cloth to wipe the exterior of the fixture.
• For lenses, use a specialized lens cleaning solution and cloth to avoid scratches.
• Periodically clean the cooling fan vents to prevent dust buildup, which can impede airflow and cause overheating.

7.2 Storage

When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a padded case to protect it from damage.

8. Troubleshooting

If you encounter issues with your DJXFLI Moving Head Light, refer to the table below for common problems and solutions.

9. Specifications

Detailed technical specifications for the DJXFLI 60W RGBW Moving Head Stage Light:

Figure 9.1: Product dimensions for installation planning.

10. Warranty and Support

DJXFLI is committed to providing high-quality products and customer satisfaction.

10.1 Service Guarantee

If you encounter any defective items or have questions regarding your product, please contact DJXFLI customer service. We aim to respond to all inquiries within 24 hours to provide the best possible service.

For support, please visit the official DJXFLI store or contact us through your purchase platform.

Visit the DJXFLI Store on Amazon