Marshall CV504 3GSDI Micro POV Camera User Manual

1. Introduction

This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your Marshall CV504 3GSDI Micro POV Camera. Please read this manual thoroughly before using the camera to ensure optimal performance and to prevent damage.

2. Safety Information

Observe the following safety precautions to prevent damage to the camera and ensure user safety:

• Do not expose the camera to water or moisture.
• Avoid placing the camera in direct sunlight or near heat sources.
• Use only the specified power adapter and cables.
• Do not attempt to open or service the camera yourself. Refer all servicing to qualified personnel.
• Keep the camera away from strong magnetic fields.

3. Package Contents

Please check the contents of your package to ensure all items are present. If any items are missing or damaged, contact your retailer.

• Marshall CV504 3GSDI Micro POV Camera
• Power Adapter (specific model may vary)
• Instruction Manual (this document)
• Mounting accessories (if included with your specific kit)

4. Camera Overview

Familiarize yourself with the physical components and connections of the Marshall CV504 camera.

Figure 4.1: Front view of the Marshall CV504 camera, showing the main lens assembly.

Figure 4.2: Side view of the Marshall CV504 camera, displaying the Marshall CV504 branding and a side screw.

Figure 4.3: Another side view of the Marshall CV504 camera, highlighting the adjustable lens ring with markings like "4mm IR 1/2.7" 3MP".

Figure 4.4: Top/rear perspective of the Marshall CV504 camera, showing the compact form factor and the Marshall CV504 logo.

Figure 4.5: Side view of the Marshall CV504 camera, showing the lens assembly on one end and a connector on the other, with the Marshall CV504 logo.

Figure 4.6: Rear panel of the Marshall CV504 camera, featuring the 3G-SDI output port, an I/O connector, a service port (Micro USB), and an indicator LED.

Key Components:

• Lens: Adjustable zoom lens for capturing video.
• 3G-SDI Output: BNC connector for video output.
• I/O Port: Multi-pin connector for external control and power input.
• Service Port: Micro USB port for firmware updates and configuration.
• Indicator LED: Provides status information (e.g., power, recording).

5. Setup

Follow these steps to set up your Marshall CV504 camera for initial use.

1. Mounting: Securely mount the camera using appropriate mounting accessories (not included unless specified). Ensure the camera is stable and positioned correctly for your desired shot.
2. Power Connection: Connect the provided power adapter to the I/O port on the rear of the camera. Plug the adapter into a suitable power outlet. The indicator LED should illuminate.
3. Video Output: Connect a 3G-SDI cable from the 3G-SDI output port on the camera to your monitor, recorder, or video switcher.
4. Initial Configuration: If required, connect to the service port via Micro USB to a computer for initial configuration or firmware updates using Marshall's proprietary software (refer to Marshall's website for software downloads).

6. Operating Instructions

This section details the basic operation of the Marshall CV504 camera.

6.1 Powering On/Off

• Power On: Connect the power adapter. The camera will power on automatically.
• Power Off: Disconnect the power adapter.

6.2 Adjusting the Lens

The CV504 features an adjustable zoom lens. Carefully rotate the lens ring to achieve the desired focus and field of view. Ensure the image is sharp on your connected monitor.

6.3 Video Output

The camera outputs video via the 3G-SDI port. Supported resolutions include 1080p and 720p. The video capture format is MPEG 4. The camera also features image stabilization for smoother footage.

6.4 Advanced Settings

For advanced settings such as white balance, exposure, and color adjustments, connect the camera to a computer via the service port and use the dedicated Marshall control software. Refer to the software's user guide for detailed instructions.

7. Maintenance

Proper maintenance ensures the longevity and performance of your camera.

• Cleaning the Lens: Use a soft, lint-free cloth specifically designed for optical lenses. Do not use abrasive materials or harsh chemicals.
• Cleaning the Body: Wipe the camera body with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the ports.
• Storage: When not in use, store the camera in a cool, dry place, away from direct sunlight and extreme temperatures. Use a protective case if transporting.

8. Troubleshooting

This section addresses common issues you might encounter with your Marshall CV504 camera.

9. Specifications

Detailed technical specifications for the Marshall CV504 3GSDI Micro POV Camera.

10. Warranty and Support

For warranty information and technical support, please refer to the official Marshall Electronics website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Marshall Electronics Official Website: www.marshall-usa.com