AERLANG HM08 Cordless Hand Massager Instruction Manual

1. Product Overview

The AERLANG HM08 Cordless Hand Massager is designed to provide targeted relief for hand discomfort through innovative heat and compression technology. Featuring multiple massage modes, intensity levels, and heat options, this portable device helps improve circulation and alleviate pain.

Key Features:

• Heat and Compression Massage: Double-sided airbags provide all-directional squeeze massage with optional heat (113-122 °F).
• Multiple Settings: 3 massage modes, 3 intensity levels, and 2 heat options for customizable comfort.
• Cordless & Portable: Equipped with a high-quality lithium battery for 2-3 hours of use per charge, rechargeable via Type-C cable.
• 10-Minute Timer: Automatic shutoff after 10 minutes for safe and convenient use.

2. Safety Information

• Do not use while charging.
• The product will automatically stop after 10 minutes of continuous use.
• The hand massager is not water resistant.
• Do not use if you have open wounds, skin irritations, or severe hand conditions without consulting a doctor.
• Keep out of reach of children.

3. Getting Started

Charging the Device:

1. Connect the provided Type-C charging cable to the massager's charging port.
2. Connect the other end of the cable to a compatible USB power source (e.g., laptop, power bank, wall adapter).
3. The ring blue light will flash during charging. It will stop flashing when fully charged.
4. Ensure the device is fully charged before first use. Charging time is approximately 5 hours.

4. Operating Instructions

Control Panel:

Using the Massager:

1. Ensure the device is fully charged.
2. Place your hand into the massager, ensuring it fits comfortably and your palm rests on the internal pad.
3. Press and hold the Power Button for 2-3 seconds to turn on the device.
4. Select your desired Massage Mode (Soft, Soothing, or Strong) by pressing the 'M' button.
5. Adjust the Intensity Level (1-3) by pressing the 'Intensity' button.
6. Activate or deactivate Heat (113-122 °F) by pressing the 'Heat' button.
7. Activate or deactivate Vibration by pressing the 'Vibration' button.
8. The massager will automatically shut off after 10 minutes. To continue, simply turn it on again.

5. Maintenance

Cleaning:

• Wipe the exterior of the massager with a soft, damp cloth.
• Do not use abrasive cleaners or immerse the device in water.
• For hygiene, disposable gloves can be used, especially in commercial settings.

6. Troubleshooting

• Device not turning on: Ensure the battery is fully charged.
• No massage/heat/vibration: Check that the device is not in charging state. The massager cannot be used while charging.
• Automatic shutoff: This is a safety feature. The device is programmed to stop after 10 minutes of continuous use. Turn it on again if further massage is desired.

7. Specifications

8. Warranty and Support

For warranty information or product support, please refer to the contact details provided with your purchase or visit the AERLANG official website.

Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.