Introduction
This manual provides essential information for the safe and proper assembly, operation, and maintenance of your BORNOON Shoe Cabinet with 3 Flip Drawers. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Safety Information
WARNING: To prevent tipping, this shoe cabinet must be securely fastened to the wall using the anti-tipping device provided. Failure to do so can result in serious injury.
- Always use the anti-tipping device and kits included with your cabinet.
- Do not allow children to climb on or play with the cabinet.
- Do not overload the cabinet. The maximum recommended capacity is 18-24 pairs of shoes, depending on shoe size and height. Overloading can compromise stability and cause damage.
- Ensure all screws and fasteners are tightened securely during assembly and checked periodically.
Package Contents
Before assembly, verify that all components listed below are present. If any parts are missing or damaged, please contact customer support.
- Cabinet panels (top, bottom, sides, back)
- 3 Flip Drawer assemblies
- Adjustable/Removable shelf panels for each drawer
- Hardware kit (screws, dowels, hinges, anti-tipping device, etc.)
- Assembly tools (if provided)
- Instruction manual
Assembly Instructions
Assembly is required for this product. A detailed instruction manual with diagrams is included in the package. Please follow these general guidelines:
- Preparation: Clear a spacious, clean area for assembly. Lay out all parts and hardware.
- Tools: Use only the provided tools or appropriate hand tools. Avoid power tools, as they may overtighten screws and damage the engineered wood.
- Step-by-Step: Follow the numbered steps in the included manual precisely. Do not skip steps.
- Secure Fasteners: Ensure all screws and connectors are fully tightened for stability.
- Anti-Tipping Device: This is a critical step. Once the cabinet is assembled and placed in its final position, securely attach the anti-tipping device to the wall according to the instructions.
Operating Instructions
Using the Flip Drawers
The cabinet features three flip drawers designed for space-saving shoe storage.
- To open a drawer, gently pull the top edge of the drawer front outwards. The drawer will pivot downwards, revealing the shoe compartments.
- To close a drawer, push the drawer front upwards until it clicks securely into its closed position.
Adjusting Shelf Panels
Each flip drawer contains two tiers of storage space with adjustable panels to accommodate various shoe types.
- The internal panel can be adjusted to two different height grooves or removed entirely.
- To adjust, carefully lift the panel and reposition it into the desired groove.
- Removing the panel allows for storage of taller items like mid-boots or heels.
Maintenance and Care
Proper care will ensure the longevity and appearance of your shoe cabinet.
- Cleaning: Wipe the smooth surface with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, which can damage the finish.
- Dusting: Regularly dust the cabinet with a dry, soft cloth.
- Spills: Clean up spills immediately to prevent staining or damage to the engineered wood.
- Inspection: Periodically check all hardware and connections to ensure they remain tight. Retighten if necessary.
Troubleshooting
If you encounter any issues with your shoe cabinet, refer to the following common solutions:
- Cabinet feels wobbly: Ensure all assembly screws are fully tightened. Verify that the anti-tipping device is securely installed and fastened to the wall.
- Drawers do not close smoothly: Check for any obstructions inside the drawer or along the hinge mechanism. Ensure shoes are not overfilling the compartments.
- Scratches on surface: While the surface is scratch-resistant, minor scratches can occur. For deeper scratches, consider using a furniture repair marker that matches the cabinet's white finish.
- Insufficient shoe capacity: Utilize the adjustable/removable panels to optimize space for different shoe types. Flats and sandals will allow for more pairs than boots or high heels.
Specifications
| Feature | Detail |
|---|---|
| Brand | BORNOON |
| Model Name | SC-80 |
| Color | White |
| Product Dimensions (D x W x H) | 9.45" x 31.5" x 47.24" |
| Material | Engineered Wood |
| Number of Drawers | 3 (Flip Drawers) |
| Number of Shelves | 6 (2 per drawer) |
| Mounting Type | Floor Mount (Freestanding with Anti-Tip) |
| Special Features | Anti-Tip Safety, Adjustable Panels, Space Saving, Scratch Resistant |
| Item Weight | 59.9 pounds |
| Assembly Required | Yes |
Warranty and Support
BORNOON is committed to providing high-quality products and customer satisfaction. Your shoe cabinet comes with a commitment to quality and support.
- Damage Policy: In the event of any damage during logistics and transportation, even minor, BORNOON is willing to replace affected parts free of charge.
- Customer Service: For any questions, concerns, or assistance with assembly or product issues, please contact BORNOON customer support. We aim to provide a satisfactory response within 24 hours.
- Contact Information: Please refer to the contact details provided on the product packaging or the retailer's website for the most current support information.