SENSEA 3276007457483
Contents
SENSEA Easy Shower and Bath System
User Manual
Introduction
This user manual provides detailed instructions for the installation, operation, and maintenance of your SENSEA Easy Shower and Bath System. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. This system combines design and user comfort, ideal for various bathroom sizes, including those with sloped ceilings.
Safety Information
- Ensure all connections are secure and watertight to prevent leaks.
- Do not use abrasive cleaners or harsh chemicals on any part of the system, as this may damage the finish or materials.
- Always turn off the main water supply before attempting any installation or maintenance.
- If you are unsure about any installation steps, consult a qualified plumber.
Package Contents
Verify that all components listed below are present in your package before beginning installation.

Image: All components included in the SENSEA Easy Shower and Bath System package.
- Main Shower Bar (Stainless Steel)
- Swivel Overhead Shower Head (ABS, 25 cm diameter)
- Hand Shower (ABS, 3 spray modes)
- PVC Shower Hose (Twist-resistant)
- Integrated Shelf with Anti-slip Mat
- Diverter
- Mounting Hardware and Seals
Setup and Installation
The SENSEA Easy Shower and Bath System is designed for easy installation and can be connected to standard 15/21 mm outlets. The column is height-adjustable to adapt to existing drill holes.

Image: Installation diagram with key dimensions and adjustable height ranges.
- Prepare the Installation Area: Ensure the wall surface is clean and suitable for mounting. Turn off the main water supply.
- Measure and Mark: Use the provided template or measure according to the diagram to mark the drilling points for the wall mounts. Consider the adjustable height feature to align with existing holes if applicable.
- Drill Holes: Drill holes at the marked points and insert wall plugs.
- Attach Wall Brackets: Secure the wall brackets to the wall using the screws.
- Assemble the Shower Bar: Connect the main shower bar components as per the instructions, ensuring the diverter and hand shower holder are correctly oriented.
- Mount the System: Carefully place the assembled shower bar onto the wall brackets. Secure it in place.
- Connect Water Supply: Connect the system to your existing water outlets (15/21 mm standard connection). Ensure all connections are sealed properly to prevent leaks.
- Attach Shower Head and Hand Shower: Screw the swivel overhead shower head onto the top arm. Connect the PVC hose to the hand shower and the diverter outlet.
- Test for Leaks: Slowly turn on the main water supply and check all connections for any leaks.
Operation
Your SENSEA Easy Shower and Bath System offers versatile showering options for enhanced comfort.

Image: Details of the integrated shelf and hand shower holder.
- Diverter Function: Use the ergonomic diverter knob to easily switch water flow between the overhead shower head and the hand shower.
- Overhead Shower Head: The 25 cm diameter overhead shower head provides a soft, constant, and covering rain spray. It is swivel-adjustable for optimal positioning.
- Hand Shower Spray Modes: The hand shower features 3 adjustable spray modes: Shower, Shampoo, and Massage. Change modes by simply pressing the button on the hand shower handle.
- Integrated Shelf: The system includes a convenient shelf with an anti-slip mat to keep your shower products within easy reach.

Image: Hand shower spray patterns, anti-twist hose, easy clean nozzles, and swivel overhead shower head.
Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your shower system.
- Cleaning Nozzles: Both the overhead shower head and hand shower are equipped with anti-limescale nozzles. To remove limescale residues, simply wipe your fingers over the nozzles.
- General Cleaning: After each use, wipe down the system with a soft cloth to maintain its effectiveness and appearance.
- Recommended Cleaners: Clean the system with a mild soap solution and water.
- Avoid Harmful Cleaners: Do not use abrasive, acidic, or chlorine-based household cleaning products, as these can damage the black matt finish and materials.
Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water pressure from shower head/hand shower | Limescale buildup in nozzles or filter. | Wipe anti-limescale nozzles with fingers. Check and clean any filters in the connections. |
| Water leaking from connections | Loose connections or worn seals. | Tighten connections. Replace seals if necessary. Ensure plumber's tape was used during installation. |
| Diverter not switching properly | Internal debris or wear. | Flush the system by running water through both outlets. If problem persists, contact support. |
| Hand shower hose twisting | Hose not properly aligned or kinked. | Ensure the hose hangs freely. The PVC hose is designed to be twist-resistant, but severe kinks can still occur. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 3276007457483 |
| Product Dimensions | 54 x 25 x 115 cm (L x W x H) |
| Item Weight | 2.78 Kilograms |
| Main Material | Stainless Steel (pipes), ABS (shower heads, shelf), PVC (hose) |
| Color/Finish | Black Matt |
| Overhead Shower Diameter | 25 cm |
| Hand Shower Spray Modes | 3 (Shower, Shampoo, Massage) |
| Connection Standard | 15/21 mm |
Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact SENSEA customer service directly. Keep your proof of purchase for any warranty claims.
You can visit the official SENSEA brand store for more information and products: SENSEA Brand Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.