SENSEA 3276007457490

Download PDF
Contents

SENSEA Easy Mechanical Shower System User Manual

Model: 3276007457490

Product Overview

The SENSEA Easy Shower System combines modern design with practical functionality for an enhanced showering experience. This system features a swivel overhead shower, a 3-spray hand shower, and an integrated shelf for convenience. Constructed from durable ABS, PVC, and stainless steel, it is designed for longevity and ease of use.

SENSEA Easy Mechanical Shower System

Figure 1: Complete SENSEA Easy Mechanical Shower System, showcasing the overhead shower, hand shower, and integrated shelf.

SENSEA Easy Mechanical Shower System installed in a bathroom

Figure 2: The SENSEA Easy Mechanical Shower System installed in a modern bathroom setting, demonstrating its aesthetic integration.

Package Contents

Before beginning installation, ensure all components are present and undamaged. The package should contain the following items:

  • Shower column
  • Overhead shower
  • Hand shower
  • Shelf with removable mat
  • Hand shower hose
  • Stainless steel tubes
  • Mounting hardware (screws, wall plugs, seals, etc.)
Components of SENSEA Easy Mechanical Shower System

Figure 3: All components included in the SENSEA Easy Mechanical Shower System package, laid out for inspection.

Setup and Installation

This shower column is designed for wall mounting and can be adjusted in height to accommodate existing drill holes. It is compatible with all water heaters.

Pre-installation Checklist:

  • Ensure water supply is turned off.
  • Verify all package contents are present (refer to Package Contents section).
  • Gather necessary tools: drill, level, measuring tape, wrench, screwdriver.

Installation Steps:

  1. Measure and Mark: Determine the desired height for the shower column. The column is adjustable between 78 cm and 115 cm. Mark the drilling points on the wall according to the provided template or measurements.
  2. Drill Holes: Use an appropriate drill bit for your wall type and drill the marked holes. Insert wall plugs.
  3. Mount Brackets: Secure the mounting brackets to the wall using the provided screws. Ensure they are level.
  4. Assemble Column: Connect the main shower column components, including the overhead shower arm and the hand shower holder.
  5. Attach to Wall: Carefully attach the assembled shower column to the mounted brackets.
  6. Connect Water Supply: Connect the shower column to your existing hot and cold water outlets. Ensure all connections are tight to prevent leaks.
  7. Install Hand Shower and Hose: Attach the PVC hand shower hose to the column and then connect the hand shower.
  8. Install Shelf: Secure the integrated shelf to the column at a convenient height. Place the removable anti-slip mat on the shelf.
  9. Test: Slowly turn on the water supply and check for any leaks. Test both the overhead shower and hand shower functions.
Technical drawing with dimensions for SENSEA Easy Mechanical Shower System installation

Figure 4: Technical drawing illustrating key dimensions and installation requirements for the SENSEA Easy Mechanical Shower System, including adjustable height and connection points.

Operating Instructions

The SENSEA Easy Shower System is designed for intuitive operation, allowing you to easily switch between shower functions and adjust water flow.

Using the Overhead Shower:

  • The overhead shower has a diameter of 25 cm, providing a soft, constant, and covering rain spray.
  • Use the ergonomic diverter to direct water flow to the overhead shower.
  • The overhead shower is adjustable, allowing you to swivel it for optimal coverage.

Using the Hand Shower:

  • The hand shower offers 3 spray types: Shower, Shampoo, and Massage.
  • To change the spray type, simply press the button located on the hand shower handle.
  • Use the ergonomic diverter to direct water flow to the hand shower.
Close-up of SENSEA Easy Mechanical Shower System diverter and hand shower

Figure 5: Close-up view of the ergonomic diverter for switching water flow and the hand shower, highlighting its design.

Hand shower spray patterns and overhead shower features

Figure 6: Illustrations demonstrating the three spray patterns of the hand shower (1: Shower, 2: Shampoo, 3: Massage) and the swivel feature of the 25 cm diameter overhead shower.

Maintenance and Care

Proper maintenance ensures the longevity and optimal performance of your SENSEA Easy Shower System. Both the main showerhead and hand shower are easy to clean thanks to their anti-limescale nozzles.

Cleaning the Nozzles:

  • To remove limescale residues, simply wipe your fingers over the anti-limescale nozzles on both the overhead shower and the hand shower.

General Cleaning:

  • To maintain the product's effectiveness and appearance, wipe it with a soft cloth after each use.
  • Clean the surfaces with a mild soap solution.
  • DO NOT use abrasive, acidic, or chlorine-based household cleaning products, as these can damage the finish and materials.

Hose Care:

  • The PVC hand shower hose is designed to be twist-resistant, ensuring better durability and preventing tangles.

Troubleshooting

This section provides solutions to common issues you might encounter with your shower system.

ProblemPossible CauseSolution
Low water pressure from showerheads.Clogged nozzles or mineral buildup.Clean the anti-limescale nozzles by wiping them with your fingers. If persistent, remove showerheads and soak in a descaling solution.
Water leaking from connections.Loose connections or worn seals.Ensure all connections are tightened properly. Check and replace any damaged rubber seals or washers.
Difficulty switching between shower functions.Diverter mechanism is stiff or obstructed.Ensure no debris is obstructing the diverter. If stiffness persists, consult a qualified plumber.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact customer support.

Specifications

FeatureDetail
BrandSENSEA
ManufacturerADEO
Model Number3276007457490
Product Dimensions54 x 33 x 115 cm (L x W x H)
Item Weight3.02 Kilograms
ColorBlack
Finish TypeMatte
MaterialAcrylonitrile Butadiene Styrene (ABS), PVC, Stainless Steel
ShapeRound (Overhead Shower)
Number of Handles1
Handle MaterialMetal
Mounting TypeWall Mount
Included ComponentsShower column, overhead shower, hand shower, shelf with removable mat, hand shower hose, stainless steel tubes
CompatibilityCompatible with all water heaters

Warranty and Support

Information regarding product warranty and customer support is not explicitly provided in the available product data. For warranty details or technical assistance, please refer to the product packaging or contact the manufacturer, ADEO, or the brand, SENSEA, directly through their official channels.

You may also visit the product page on Amazon.nl for any updated information or contact options.

© 2023 SENSEA. All rights reserved.

This manual is for informational purposes only. Specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.