Introduction
Thank you for choosing the OttLite LED Desk Lamp with Color Changing Base. This lamp is designed to provide high contrast, low glare illumination, which helps reduce eyestrain and allows you to see details clearly and comfortably. It features multiple light settings and a unique color-changing base to enhance your workspace or living area.
Setup
Follow these steps to set up your OttLite LED Desk Lamp:
- Unpack: Carefully remove all components from the packaging. Ensure all parts are present: the lamp unit and the power adapter.
- Placement: Place the lamp on a stable, flat surface. The base measures 6.5 x 6.75 inches, providing a secure foundation.
- Connect Power: Insert the small end of the power adapter into the power input port located at the back of the lamp base. Plug the other end of the power adapter into a standard electrical outlet.
Figure 1: The OttLite LED Desk Lamp with Color Changing Base, illustrating its sleek design and connectivity options.
Operating Instructions
Your OttLite lamp offers versatile lighting options for various tasks.
Main Light Operation
- Power On/Off: Press the main power button on the lamp base to turn the light on or off.
- Adjust Brightness: The lamp features three brightness settings. Briefly press the main power button repeatedly to cycle through the brightness levels.
- Change Color Mode: The lamp offers three color modes: warm light, cool light, and OttLite natural daylight. Press and hold the main power button to switch between these color modes.
Figure 2: Illustration of the three distinct brightness levels available for the main LED light.
Figure 3: The intuitive touch controls located on the lamp base for easy operation.
Color Changing Base Operation
- Activate Color Base: The color-changing base is controlled by a separate touch-sensitive color wheel on the lamp base. Touch the color wheel to turn on the base light.
- Select Color: Slide your finger along the color wheel to select your desired static color.
- Cycle Colors: Press and hold the color wheel for a few seconds to activate a continuous cycle through the entire color spectrum.
Figure 4: Examples of the vibrant color options available for the lamp's base.
USB Charging Port
- The lamp includes a 5V, 2.1A USB charging port located on the back of the base.
- Use this port to conveniently charge your smartphones, tablets, and other USB-powered devices.
Figure 5: The integrated USB charging port for convenient device charging.
Maintenance
To ensure the longevity and optimal performance of your OttLite LED Desk Lamp, follow these maintenance guidelines:
- Cleaning: Disconnect the lamp from the power source before cleaning. Use a soft, dry cloth to wipe down the lamp. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
- LED Care: The LEDs in this lamp are designed to last for many years and are not replaceable. Do not attempt to open or modify the lamp head.
- Storage: If storing the lamp for an extended period, ensure it is clean and dry. Store it in a cool, dry place away from direct sunlight.
Troubleshooting
If you encounter any issues with your OttLite LED Desk Lamp, refer to the following table for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Power adapter not properly connected or no power from outlet. | Ensure the power adapter is securely plugged into both the lamp and a working electrical outlet. Test the outlet with another device. |
| Main light is dim or flickers. | Incorrect brightness setting or power issue. | Cycle through brightness settings by pressing the main power button. Check power connection. |
| Color changing base does not work. | Not activated or touch control issue. | Ensure you are touching the color wheel correctly. Try unplugging and re-plugging the lamp. |
| USB charging port not working. | Device not compatible or power issue. | Ensure your device is compatible with 5V/2.1A USB charging. Check lamp's power connection. |
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | MCC00Z-SHPR |
| Brand | OttLite |
| Lamp Type | LED Desk Lamp |
| Light Source Type | LED |
| Brightness | 493 Lumens |
| Wattage | 4.93 watts |
| Voltage | 5 Volts |
| Color Modes | 3 (Warm, Cool, Natural Daylight) |
| Brightness Settings | 3 per color mode |
| Base Features | Color Changing, Touch Control |
| USB Charging Port | 5V, 2.1A |
| Height Adjustment | 12 to 24.25 inches |
| Base Dimensions | 6.5"W x 6.75"D |
| Overall Product Dimensions | 6.75"D x 6.5"W x 24.25"H |
| Item Weight | 3.04 pounds |
| Material | Metal, Plastic |
| Finish Type | Glossy |
| UPC | 761712018508 |
Figure 6: Key dimensions and adjustable features of the lamp.
Warranty and Support
OttLite Technologies stands behind the quality of its products. For specific warranty information and to register your product, please visit the official OttLite website or contact their customer support.
Manufacturer: OttLite Technologies
For further assistance, please refer to the contact information provided with your product packaging or visit the OttLite store online: OttLite Store
