ASRock B760M PG Lightning/D4 Motherboard Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your ASRock B760M PG Lightning/D4 motherboard. Please read this manual thoroughly before beginning the installation process to ensure proper setup and to maximize the performance and longevity of your system. This motherboard is designed for Intel LGA 1700 processors and supports DDR4 memory in a Micro-ATX form factor.

2. Product Overview

The ASRock B760M PG Lightning/D4 motherboard offers robust performance and essential features for a reliable computing experience. It features an LGA 1700 socket for Intel processors, DDR4 memory support, and a Micro-ATX form factor suitable for compact builds.

Figure 2.1: Top-down view of the ASRock B760M PG Lightning/D4 motherboard, showcasing the LGA 1700 CPU socket, DDR4 DIMM slots, and M.2 slots.

Figure 2.2: Front view of the motherboard, illustrating the arrangement of expansion slots, storage interfaces, and power connectors.

Figure 2.3: Rear Input/Output (I/O) panel, detailing the available ports for external device connectivity.

3. Setup

3.1. Preparing for Installation

• Ensure you have a compatible CPU (LGA 1700 socket), DDR4 RAM, and a power supply.
• Gather necessary tools: Phillips-head screwdriver, anti-static wrist strap (recommended).
• Work on a clean, flat, and static-free surface.

3.2. CPU Installation

1. Open the CPU socket lever and remove the protective cover.
2. Carefully align the CPU with the socket, ensuring the triangular markers match. Do not force the CPU into the socket.
3. Close the socket lever to secure the CPU.
4. Apply thermal paste and install the CPU cooler according to its manufacturer's instructions.

3.3. RAM Installation

1. Open the clips on both ends of the DDR4 DIMM slots.
2. Align the RAM module with the slot, ensuring the notch on the module matches the key in the slot.
3. Press down firmly on both ends of the RAM module until the clips snap into place.

3.4. Storage Device Installation

• M.2 SSD: Locate the M.2 slots. Insert the M.2 SSD at an angle and secure it with the provided screw.
• SATA Drives: Connect SATA data cables to the motherboard's SATA ports and to your SSDs/HDDs. Connect power cables from your PSU to the drives.

3.5. Power Supply Connection

• Connect the 24-pin ATX power connector from your PSU to the motherboard.
• Connect the 8-pin (or 4+4-pin) CPU power connector to the motherboard.

3.6. Front Panel Connections

• Connect the front panel headers (Power LED, HDD LED, Power Switch, Reset Switch) to the corresponding pins on the motherboard. Refer to the motherboard diagram for correct pin assignments.
• Connect front panel USB and audio cables.

4. Operating

4.1. First Boot

• After assembling all components, connect your monitor, keyboard, and mouse.
• Power on your system. The system should display the BIOS/UEFI screen.
• Access the BIOS/UEFI setup by pressing the designated key (usually Del or F2) during startup.

4.2. BIOS/UEFI Configuration

• Set the boot order to your preferred operating system installation media (USB drive or DVD).
• Configure other settings as needed, such as XMP profiles for RAM or fan curves.
• Save changes and exit the BIOS/UEFI.

4.3. Operating System Installation

Follow the on-screen instructions to install your operating system. After installation, install all necessary drivers from the ASRock website or the provided driver CD/USB drive for optimal performance.

5. Maintenance

5.1. Cleaning

• Regularly clean dust from your PC case and motherboard components using compressed air.
• Ensure the system is powered off and unplugged before cleaning.

5.2. BIOS/UEFI Updates

• Check the ASRock website for the latest BIOS/UEFI updates.
• Follow the instructions provided by ASRock carefully when updating the BIOS/UEFI to avoid system instability.

6. Troubleshooting

6.1. No Power/No Boot

• Check all power connections (24-pin ATX, 8-pin CPU) are securely seated.
• Ensure the power supply switch is in the 'ON' position.
• Verify front panel power switch connection to the motherboard.

6.2. No Display

• Confirm the monitor is connected to the correct graphics output (either integrated graphics on the motherboard or a dedicated graphics card).
• Reseat the RAM modules. Incorrectly seated RAM is a common cause of no display.
• If using a dedicated graphics card, ensure it is properly seated in the PCIe slot and has adequate power connections.

6.3. System Instability/Crashes

• Ensure all drivers are up to date.
• Check CPU and GPU temperatures to prevent overheating.
• Run memory diagnostic tools to check for faulty RAM.

7. Specifications

8. Warranty and Support

For detailed warranty information and technical support, please refer to the official ASRock website or contact ASRock customer service. Keep your proof of purchase for warranty claims. Support resources often include FAQs, driver downloads, and contact information for technical assistance.