Introduction
Thank you for choosing the LUXRITE UFO High Bay LED Shop Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Safety Information
- Always turn off power at the circuit breaker before installation, removal, or maintenance.
- Installation should be performed by a qualified electrician in accordance with all national and local electrical codes.
- Ensure the supply voltage is compatible with the fixture (120-277V).
- Do not look directly into the LED light source when illuminated, as it may cause eye damage.
- Do not modify the fixture in any way. Unauthorized modifications may void the warranty and create safety hazards.
- Ensure the mounting structure can support the weight of the fixture (approximately 7.9 lbs).
Package Contents
Verify that all components are present before beginning installation:
- LUXRITE UFO High Bay LED Shop Light Fixture
- 5ft Hardwire Cable (pre-attached)
- Mounting Hook
Product Features
The LUXRITE UFO High Bay LED Shop Light is designed for versatile and efficient commercial lighting applications.
- Color Tunable (3CCT): Select between 3500K (Natural White), 4000K (Cool White), and 5000K (Bright White) to suit your environment.
- Wattage Selectable: Adjust power consumption and brightness with options for 200W, 220W, or 240W.
- High Lumen Output: Up to 36,000 lumens at 240W/4000K for extensive illumination.
- 6KV Surge Protected: Built-in protection against power surges and voltage spikes.
- IP65 Rated: Certified for protection against dust and water, suitable for damp and wet locations.
- 0-10V Dimmable: Compatible with 0-10V dimmers for adjustable light levels.
- UL Certified: Ensures safety and quality standards are met.
- Long Lifespan: Rated for 50,000 hours of operation.
Overview of key features including lifespan, protection ratings, and adjustability.
Visual representation of different color temperatures and wattage outputs in a commercial space.
Detailed lumen output for each wattage and color temperature setting.
Setup and Installation
This fixture is designed for hardwired installation and comes with a pre-attached 5ft cable and a mounting hook.
- Power Disconnection: Before starting, ensure the power supply to the installation area is completely disconnected at the circuit breaker.
- Mounting Location: Select a suitable location that can safely support the fixture's weight and provides adequate clearance.
- Fixture Hanging: Securely attach the provided mounting hook to a sturdy ceiling structure. Hang the UFO High Bay LED fixture from this hook.
- Wiring Connections: Connect the fixture's hardwire cable to your building's electrical system (120-277V). Follow standard electrical codes for connecting live, neutral, and ground wires. The fixture includes additional wires for 0-10V dimming functionality; connect these to a compatible 0-10V dimmer if desired. Ensure all connections are secure and insulated.
- Power Restoration: Once installation is complete and all connections are verified, restore power at the circuit breaker.
The fixture with its hardwire cable and adjustment switches.
Product dimensions for planning installation space.
Operating Instructions
The LUXRITE UFO High Bay LED Light offers adjustable settings for optimal performance.
- Color Temperature Selection: Locate the CCT (Color Correlated Temperature) switch on the fixture. Before powering on, slide the switch to select your desired color temperature: 3500K, 4000K, or 5000K.
- Wattage Selection: Locate the wattage adjustment switch on the fixture. Before powering on, slide the switch to select your desired wattage: 200W, 220W, or 240W. This will adjust the brightness (lumens) of the light.
- Dimming Functionality: If connected to a compatible 0-10V dimmer, use the dimmer control to adjust the light output from 0% to 100%.
Maintenance
The LUXRITE UFO High Bay LED Light requires minimal maintenance.
- Cleaning: Ensure power is off before cleaning. Use a soft, dry, or slightly damp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents.
- Inspection: Periodically inspect the fixture and wiring for any signs of damage or wear. Address any issues promptly.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply; Loose wiring; Faulty fixture | Check circuit breaker; Verify wiring connections; Contact customer support if issue persists. |
| Light flickers | Unstable power supply; Incompatible dimmer; Loose wiring | Check power source stability; Ensure 0-10V dimmer compatibility; Inspect wiring connections. |
| Incorrect color temperature or brightness | CCT/Wattage switch set incorrectly | Adjust the CCT or wattage selection switch on the fixture (ensure power is off before adjusting). |
Specifications
| Specification | Detail |
|---|---|
| Brand | LUXRITE |
| Model Number | LR41526 |
| Wattage | 200W / 220W / 240W Selectable |
| Brightness | Up to 36000 Lumens (at 240W/4000K) |
| Color Temperature | 3500K / 4000K / 5000K Selectable |
| Voltage | 120-277V |
| Dimmable | 0-10V Dimmable |
| IP Rating | IP65 (Waterproof) |
| Surge Protection | 6KV Built-in |
| Lifespan | 50,000 Hours |
| Beam Angle | 90° |
| Material | Metal |
| Product Dimensions | 13.4"L x 13.4"W x 5.75"H |
| Item Weight | 7.87 Pounds |
| Certifications | UL Certified, DLC Premium |
The IP65 rating ensures protection against dust and water.
Built-in 6KV surge protection for enhanced durability.
Warranty and Support
This LUXRITE UFO High Bay LED Shop Light is backed by a 5-Year Manufacturer's Warranty, ensuring quality and reliability. For technical assistance, warranty claims, or any questions regarding your product, please contact LUXRITE customer support through the retailer where the product was purchased or visit the official LUXRITE website.
