Important Safety Information
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause property damage.
- WARNING: To avoid electric shock, disconnect power at the main circuit breaker or fuse box before installation or servicing.
- All electrical connections must be in accordance with local codes and the National Electric Code (NEC). If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.
- This fixture is intended for indoor use only.
- Do not exceed the recommended wattage for bulbs. Refer to the specifications section for details.
- Handle glass components and crystals with care to prevent breakage.
Package Contents
Carefully unpack your new fixture and lay out all parts on a clear area. Ensure all items listed below are present before discarding any packaging materials.
- Chandelier Frame (Matte Black)
- Crystal Teardrops (various sizes)
- Mounting Hardware Kit (crossbar, mounting screws, wire nuts, ground screw)
- Canopy and Collar Ring
- Chain (120 inches)
- Instruction Manual
Setup and Installation
Professional installation is recommended. Ensure power is OFF at the circuit breaker before proceeding.
- Turn Off Power: Locate the circuit breaker controlling the power to the installation location and turn it OFF.
- Prepare Mounting: Attach the mounting crossbar to the outlet box using the provided screws.
- Adjust Chain Length: Determine the desired hanging height and adjust the chain length by removing links as necessary.
- Wire Connections: Connect the fixture's wires to the house wires according to electrical codes (black to black, white to white, ground to ground). Secure connections with wire nuts.
- Secure Canopy: Tuck wires into the outlet box and raise the canopy to the ceiling, securing it with the collar ring.
- Attach Chandelier Body: Carefully attach the chandelier body to the chain.
- Install Bulbs: Screw in six (6) incandescent bulbs (not included) into the sockets. Do not exceed 60 watts per bulb.
- Attach Crystals: Carefully hang the crystal teardrops onto the designated hooks on the chandelier frame.
- Restore Power: Once installation is complete, turn the power back ON at the circuit breaker.
Operating Instructions
This chandelier operates like a standard lighting fixture. Ensure it is properly installed and connected to a power source.
- Turning On/Off: Use the wall switch connected to the fixture to turn the chandelier on or off.
- Dimming Functionality: This fixture is dimmable. If connected to a compatible dimmer switch (sold separately), you can adjust the light intensity. Ensure you use dimmable incandescent bulbs.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your chandelier.
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the metal finish. For crystals, a damp cloth with mild soap and water can be used, followed by a dry cloth. Avoid abrasive cleaners or solvents.
- Bulb Replacement: Ensure power is off. Allow bulbs to cool before replacing. Use only incandescent bulbs up to 60 watts.
Troubleshooting
If you experience issues with your chandelier, refer to the following common problems and solutions:
- Light does not turn on:
- Check if the power is on at the circuit breaker.
- Ensure the wall switch is in the "ON" position.
- Verify that bulbs are securely screwed in and are not burnt out.
- Inspect wire connections for proper contact.
- Flickering lights:
- Ensure bulbs are fully tightened.
- If using a dimmer, ensure it is compatible with incandescent bulbs and that the bulbs are dimmable.
- Check for loose wire connections.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 3039-59MB |
| Brand | Z-Lite |
| Finish Color | Matte Black |
| Material | Steel, Glass (for crystals) |
| Dimensions (W x L x H) | 58.75 x 58.75 x 34 inches |
| Item Weight | 38 pounds |
| Number of Lights | 6 |
| Bulb Type | Incandescent (not included) |
| Max Wattage per Bulb | 60 Watts |
| Total Wattage | 360 Watts (6 x 60W) |
| Voltage | 120 Volts |
| Dimmable | Yes |
| Moisture Rating | Dry Rated |
| Chain Length | 120 inches |
Warranty and Support
For warranty information or technical support, please contact Z-Lite customer service. Keep your purchase receipt for warranty claims.
- Manufacturer: Z-Lite
- Website: www.z-lite.com (Example link, actual link may vary)
- Contact: Refer to the Z-Lite website or original packaging for specific customer service contact details.
