Commercial Electric 15-inch Brushed Nickel Ultra-Low Profile Integrated LED Flush Mount (2-Pack)

Introduction

This instruction manual provides important information for the safe installation, operation, and maintenance of your Commercial Electric 15-inch Brushed Nickel Ultra-Low Profile Integrated LED Flush Mount fixtures. These fixtures feature an ultra-low profile design with Edgelit technology, offering 90 CRI high color rendering for optimal illumination. The frosted acrylic diffuser ensures glare-free, natural light. Equipped with long-lasting LED technology, these lights provide significant energy savings and include a selectable color temperature (5CCT) switch for customizable lighting.

Image: A single Commercial Electric 15-inch Brushed Nickel Ultra-Low Profile Integrated LED Flush Mount fixture, showcasing its sleek, round design and brushed nickel finish.

Safety Information

• WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing.
• This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
• Use supply wires rated for at least 90°C (194°F).
• Ensure all electrical connections are secure and comply with local codes and ordinances.
• Do not alter, relocate, or remove any electrical components.
• Suitable for dry locations only. Do not install in areas exposed to moisture.

Image: Four circular icons illustrating key features: 'Hardwired' (electrical wires), 'Dimmable' (dimmer switch), 'Dry Location' (water drop with a cross), and 'LED Integrated' (light bulb with rays).

Package Contents

Verify that all components are present before beginning installation:

• 2 x 15-inch LED Flush Mount Fixtures
• Mounting Hardware (screws, wire nuts)
• LED Lens (pre-installed)

Image: Product packaging for the Commercial Electric 2-Pack LED Color Changing Flush Mount. It highlights features like ultra-low profile design, 14.8-inch diameter, and the 5CCT color temperature options.

Setup and Installation

The Commercial Electric LED Flush Mount is designed for easy, one-person installation using its exclusive quick install bracket.

1. Prepare for Installation: Turn off power at the circuit breaker or fuse box. Ensure the power is completely disconnected before proceeding.
2. Install Mounting Bracket: Secure the quick install bracket to the junction box in your ceiling using the provided screws. Ensure the bracket is firmly attached.
3. Select Color Temperature (CCT): Before wiring, locate the integrated switch on the back of the fixture. Select your desired color temperature: Warm White (2700K), Soft White (3000K), Neutral White (3500K), Bright White (4000K), or Daylight (5000K). This setting cannot be changed after installation without removing the fixture.
4. Wire Connections: Connect the fixture's wires to your household wiring. Connect the black wire from the fixture to the black (live) wire from the junction box, the white wire from the fixture to the white (neutral) wire from the junction box, and the ground wire from the fixture to the ground wire from the junction box. Use wire nuts to secure connections.
5. Attach Fixture: Hang the fixture from the installed bracket while completing the wiring. Once wired, swing the fixture up and secure it to the bracket using the lock bracket mechanism.

Image: An illustration demonstrating the easy installation process. It shows the quick install bracket attached to a junction box, with wires being connected, and an arrow indicating how the light fixture swings up and locks into place.

Image: The back of the product packaging, detailing LED lighting performance and highlighting the integrated switch for adjusting color temperature (2700K, 3000K, 3500K, 4000K, 5000K) before installation.

Operating Instructions

Once installed and power is restored, your LED flush mount fixture is ready for use. The selected color temperature will be active.

• Power On/Off: Operate the light using a standard wall switch connected to the fixture.
• Dimming: This fixture is compatible with many LED wall dimmers, allowing dimming to 10% without buzzing or flickering. Ensure your dimmer switch is LED-compatible for optimal performance.
• Color Temperature (CCT) Selection: The desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) must be selected via the switch on the back of the fixture prior to installation. It cannot be changed during normal operation without dismounting the fixture.

Image: The Commercial Electric 15-inch LED Flush Mount fixture installed on a white ceiling in a room with blue walls, demonstrating its low-profile appearance when in use.

Maintenance

The Commercial Electric LED Flush Mount is designed to be maintenance-free with no bulbs to change, offering a rated life of 45 years or 50,000 hours of continuous use.

• Cleaning: To clean the fixture, ensure the power is turned off. Use a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• LED Longevity: The integrated LED light source is designed for long-term performance and does not require replacement.

Troubleshooting

Specifications

Warranty

This Commercial Electric LED Flush Mount fixture is backed by a 5-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Support

For further assistance, technical support, or warranty inquiries, please contact Commercial Electric customer service. Refer to the product packaging or the Commercial Electric website for the most current contact information.

Online resources may also be available for additional installation guides or FAQs.