ICE-WATCH 022055

ICE-WATCH ICE Digit Retro Blue Curacao Digital Watch User Manual

Model: 022055

Introduction

This manual provides comprehensive instructions for the ICE-WATCH ICE Digit Retro Blue Curacao digital watch, model 022055. This timepiece combines a retro aesthetic with modern digital functionality, offering features such as time display, alarm, chronograph, dual time, and backlight. Please read this manual carefully to ensure proper use and maintenance of your watch.

Front view of the ICE-WATCH ICE Digit Retro Blue Curacao digital watch, showing the digital display, gold-tone bezel, and blue plastic strap.

Figure 1: Front view of the ICE Digit Retro watch. This image displays the watch face with its digital time display, the gold-tone octagonal bezel, and the vibrant blue plastic strap. The buttons for 'RESET', 'ST/STP', 'MODE', and 'LIGHT' are visible on the sides of the case.

Setup

Initial Activation

Your watch is typically shipped with a plastic stopper in the crown/button to preserve battery life. Remove this stopper if present. The watch should power on automatically. If the display is blank, press any button to activate it.

Setting Time and Date

  1. Press the MODE button repeatedly until the time setting mode is displayed (usually indicated by flashing digits).
  2. Use the RESET button to select the digit you wish to adjust (hours, minutes, seconds, month, day).
  3. Use the ST/STP button to increase the selected digit. Hold the button to advance rapidly.
  4. Once all settings are correct, press the MODE button to exit the setting mode.
Side view of the ICE-WATCH ICE Digit Retro Blue Curacao digital watch, showing the buttons on the right side of the case.

Figure 2: Side view of the ICE Digit Retro watch. This image highlights the two control buttons located on the right side of the watch case, used for adjusting settings and operating functions.

Operating Instructions

Basic Time Display

In normal timekeeping mode, the watch displays the current time (hours, minutes, seconds) and date (day of week, month, day).

Using the Backlight

Press the LIGHT button (typically located on the top right or bottom right) to illuminate the display for a few seconds, improving visibility in low-light conditions.

Alarm Function

  1. Press the MODE button until the alarm setting screen appears.
  2. Use RESET to select hours or minutes.
  3. Use ST/STP to adjust the alarm time.
  4. Press MODE to confirm and exit.
  5. To activate/deactivate the alarm, press RESET while in alarm mode. An alarm icon will appear/disappear.

Chronograph (Stopwatch)

  1. Press the MODE button until the chronograph mode is displayed (usually showing "00:00:00").
  2. Press ST/STP to start the stopwatch.
  3. Press ST/STP again to pause/resume.
  4. Press RESET to reset the stopwatch to zero.

Dual Time

This feature allows you to track a second time zone. Consult the full manual for detailed instructions on setting and viewing dual time, as steps may vary slightly.

Maintenance

Cleaning Your Watch

Wipe the watch case and strap with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly. Avoid harsh chemicals or abrasive cleaners.

Water Resistance (30 Meters / 10 ATM)

Your ICE Digit Retro watch is water resistant up to 30 meters (10 ATM). This means it is suitable for everyday use, splashes, rain, and brief immersion in water, such as swimming or water sports. It is not suitable for diving or high-pressure water activities. Do not operate buttons while the watch is wet or submerged to prevent water ingress.

Back view of the ICE-WATCH ICE Digit Retro Blue Curacao digital watch, showing the stainless steel caseback with model number and water resistance rating.

Figure 3: Back view of the ICE Digit Retro watch. This image shows the stainless steel caseback, which includes the model reference (022055) and the water resistance rating of 30M.

Battery Replacement

The watch uses one Lithium metal battery. When the display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.

Strap Care

The plastic strap is durable but can be affected by prolonged exposure to direct sunlight, extreme temperatures, or harsh chemicals. Clean it regularly and avoid bending it excessively to prolong its lifespan.

Troubleshooting

Problem Possible Cause Solution
Display is blank or dim. Low battery or battery needs replacement. Replace the battery.
Time is incorrect. Time not set correctly or accidental button press. Refer to "Setting Time and Date" section to reset the time.
Buttons are unresponsive. Temporary software glitch or water ingress. Try a soft reset (if applicable, by holding all buttons for a few seconds) or allow the watch to dry if exposed to water. If issues persist, seek professional service.
Water inside the watch. Water resistance compromised (e.g., buttons pressed underwater, extreme pressure). Immediately take the watch to a qualified technician for inspection and repair to prevent further damage.

Specifications

  • Model Number: 022055
  • Brand: ICE-WATCH
  • Display Type: Digital
  • Movement Type: Quartz
  • Case Material: Gold-tone metal bezel with rubber case
  • Strap Material: Plastic
  • Dial Window Material: Mineral Glass
  • Case Diameter: 32 Millimeters
  • Band Width: 16 Millimeters
  • Case Thickness: 8 Millimeters
  • Weight: 28 Grams
  • Water Resistance: 30 Meters (10 ATM) - Suitable for swimming and water sports, not diving.
  • Special Features: Alarm, Chronograph, Dual Time, Backlight
  • Battery: 1 Lithium metal (included)
  • Clasp Type: Buckle

Warranty Information

This ICE-WATCH product is covered by the manufacturer's standard warranty against defects in materials and workmanship. The warranty period typically begins from the date of purchase. Please retain your proof of purchase for any warranty claims. The warranty does not cover damage resulting from improper use, accidents, unauthorized repairs, or normal wear and tear. For specific warranty terms and conditions, please refer to the warranty card included with your watch or visit the official ICE-WATCH website.

Support

For further assistance, technical support, or service inquiries regarding your ICE-WATCH ICE Digit Retro watch, please contact ICE-WATCH customer service. You can typically find contact details on the official ICE-WATCH website or through the retailer where the watch was purchased.

Official Website: www.ice-watch.com

When contacting support, please have your watch model number (022055) and proof of purchase readily available.

© 2023 ICE-WATCH. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.