Lamicall Magnetic Phone Ring Holder

Introduction

Thank you for choosing the Lamicall Magnetic Phone Ring Holder. This product is designed to enhance your smartphone experience by providing a secure grip and a convenient stand function. It features strong magnetic attachment for MagSafe-compatible devices and includes an adhesive metal ring for broader compatibility. Please read this manual carefully to ensure proper use and optimal performance.

The Lamicall Magnetic Phone Ring Holder securely attached to the back of a smartphone, demonstrating a comfortable grip.

Safety Information

• Keep the product away from strong magnetic fields that could interfere with other electronic devices.
• Do not expose the product to extreme temperatures or direct sunlight for prolonged periods.
• Ensure the magnetic attachment is secure before relying on the grip to prevent drops.
• Keep out of reach of children.

Package Contents

• Lamicall Magnetic Phone Ring Holder (1 unit)
• Adhesive Metal Ring (for non-MagSafe devices)

Setup

For MagSafe Compatible Devices (iPhone 12 series and newer, or MagSafe cases):

1. Ensure your device or case is clean and free of dust.
2. Align the Lamicall Magnetic Phone Ring Holder with the MagSafe area on the back of your device or case.
3. The magnets will automatically snap into place, securing the holder.

The magnetic phone ring holder being detached from an iPhone, highlighting its strong magnetic attachment to MagSafe-compatible devices.

For Non-MagSafe Devices (Android phones or non-MagSafe cases):

1. Clean the back surface of your phone or case thoroughly.
2. Peel off the protective film from the adhesive metal ring.
3. Carefully center and press the metal ring onto the desired position on your phone or case. Ensure it is flat and smooth.
4. Allow the adhesive to set for a few hours before attaching the magnetic phone ring holder.
5. Once the metal ring is securely attached, you can then attach the Lamicall Magnetic Phone Ring Holder to it magnetically.

An illustration demonstrating how the ring holder attaches directly to MagSafe-compatible iPhones and cases, and how a separate adhesive metal ring enables compatibility with non-MagSafe Android phones and cases.

Operating Instructions

Using as a Grip:

• Extend the soft belt from the ring holder.
• Place two fingers (e.g., index and middle finger) around the soft belt for a secure and comfortable hold.
• Important: Do not insert a single finger into the small hole between the belt. The design is for gripping the belt with two fingers to prevent discomfort.

A person holding a smartphone with the Lamicall Magnetic Phone Ring Holder, illustrating the ergonomic design for a comfortable and secure grip.

Demonstration of comfortable one-handed operation using the Lamicall Magnetic Phone Ring Holder.

Using as a Stand:

• Fold out the ring holder to create a stable kickstand.
• Place your phone horizontally on a flat surface for hands-free viewing.
• The stand supports various viewing angles for optimal comfort.

The phone ring holder folded out to act as a kickstand, supporting the smartphone in a horizontal position for hands-free viewing on a flat surface.

Wireless Charging:

• For wireless charging, simply detach the magnetic phone ring holder from your device.
• This allows for unobstructed charging on any wireless charging pad.

The magnetic phone ring holder easily detaches from the smartphone, allowing for convenient wireless charging without interference.

Features

• Soft Belt, No Finger Pain: Features a soft belt for a comfortable grip, reducing finger discomfort during prolonged use. The high-quality plastic construction is lighter than metal rings, minimizing strain on your fingers and phone.
• Strong Magnetic Force, Drop Prevention: Equipped with powerful magnets capable of holding up to approximately 1400g, ensuring a secure attachment to your device and preventing accidental drops.
• Versatile Stand Function: Easily converts into a kickstand for hands-free horizontal viewing, perfect for watching videos or video calls.
• Camera Lens Protection: With a thickness of 5.5mm, the holder slightly elevates your phone when placed flat, protecting the camera lenses from scratches.

A detailed view of the soft belt feature on the Lamicall Magnetic Phone Ring Holder, designed to prevent finger pain during prolonged use.

Compatibility

The Lamicall Magnetic Phone Ring Holder is compatible with a wide range of devices:

• Direct MagSafe Attachment: iPhone 2025, iPhone 17, iPhone 17 Pro, iPhone Air, iPhone 16, 16Plus, 16Pro, 16Pro Max, iPhone 15, 15Plus, 15Pro, 15Pro Max, iPhone 14, 14Plus, 14pro, 14pro max, iPhone 13, 13 Pro, 13 Pro Max, 13 mini, iPhone 12, 12 Pro, 12 Pro Max, 12 mini, and MagSafe-compatible cases.
• Via Adhesive Metal Ring (Included): Android smartphones such as Samsung Galaxy (S3, S4, S5, S6, S7, S8, S9, Note series), LG, Sony Xperia, Huawei, Xiaomi, and other non-MagSafe devices or cases.
• Also suitable for small tablets.

Maintenance

• To clean the product, wipe it gently with a soft, dry cloth.
• Avoid using harsh chemicals or abrasive materials, as these may damage the surface.
• Ensure the magnetic surfaces are clean for optimal adhesion.

Troubleshooting

Specifications

Warranty & Support

This Lamicall product comes with a 1-year warranty against manufacturer defects. If you encounter any issues or have questions regarding your product, please contact Lamicall customer support through the retailer where you purchased the item or visit the official Lamicall website for assistance.

For more information and support, please visit: Lamicall Store