1. Important Safety Information
Please read this manual thoroughly before assembly and use. Keep this manual for future reference. Incorrect assembly or use may result in product damage, property damage, or personal injury.
- Weight Capacity: Do not exceed the maximum load capacity of 50kg (110 lbs) for the TV stand. The top shelf has a capacity of 2.5kg, and the lower shelf has a capacity of 5kg.
- TV Size and VESA Compatibility: This stand is designed for 32-70 inch TVs. Ensure your TV's VESA pattern (mounting hole distance on the back of the TV) is compatible with the stand (max 600x400mm). Common compatible VESA patterns include 100x100, 200x100, 200x200, 300x200, 400x200, 300x300, 400x300, 400x400, and 600x400mm.
- Stability: Always ensure the casters are locked when the stand is in a stationary position to prevent accidental movement. Distribute weight evenly on shelves.
- Assembly: Follow all assembly instructions carefully. If you encounter any difficulties or have missing parts, contact customer support immediately. Do not use power tools for assembly unless specified, as overtightening screws can cause damage.
- Children: Keep children away from the TV stand during assembly. Do not allow children to climb on or play with the stand or attached TV.
2. Package Contents
Verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Instruction Manual
- Casters (4 units)
- Cable Ties
- Shelves (2 units)
- All necessary hardware (screws, washers, spacers, etc.)
- Main stand components (base, poles, TV mounting bracket)
3. Specifications
| Feature | Detail |
|---|---|
| Model Number | FM6614-JP |
| Brand | FORGING MOUNT |
| Compatible TV Sizes | 32-70 inches |
| Maximum Load Capacity (TV) | 50 kg (110 lbs) |
| Top Shelf Load Capacity | 2.5 kg |
| Lower Shelf Load Capacity | 5 kg |
| VESA Compatibility | 100x100, 200x100, 200x200, 300x200, 400x200, 300x300, 400x300, 400x400, 600x400mm |
| Height Adjustment Range | 1590mm to 1720mm (approx. 62.6 to 67.7 inches) |
| Tilt Angle | Up/Down 15° |
| Material | Steel |
| Movement Type | Swivel, Tilt, Rotate |
4. Setup and Assembly Instructions
Follow these steps carefully to assemble your FORGING MOUNT Mobile TV Stand.
Step 4.1: Attach Casters to the Base
Secure the four casters to the base of the TV stand. Ensure they are tightened properly for stability.
Description: This image illustrates the caster wheel with its locking mechanism. The blue arrow indicates the direction to press the lever to engage the brake, securing the stand in place.
Step 4.2: Assemble the Dual Poles and Shelves
Attach the dual support poles to the base. Then, install the two media shelves onto the poles. The shelves are height-adjustable and can be removed if not needed.
Description: This image displays the TV stand with its dual poles and two shelves. The top shelf is suitable for a laptop, and the lower shelf can hold smaller media devices like a projector or speaker. Dimensions and load capacities for each shelf are also shown.
Step 4.3: Attach the TV Mounting Bracket
Secure the TV mounting bracket to the dual poles at your desired height. Ensure the bracket is level and securely fastened.
Description: This diagram provides an overview of the TV stand's dimensions and VESA compatibility. It indicates support for 32-70 inch TVs with a maximum load of 50kg and VESA patterns up to 600x400mm.
Step 4.4: Mount the TV
Carefully attach your TV to the mounting bracket. Ensure all screws are tightened to secure the TV. Double-check the VESA compatibility and TV weight before mounting.
Description: This image shows the fully assembled FORGING MOUNT mobile TV stand with a television mounted, demonstrating its intended use.
5. Operating Instructions
5.1: Adjusting TV Height
The TV mounting bracket can be adjusted vertically along the dual poles. Loosen the securing bolts on the back of the poles, slide the TV to the desired height (between 1590mm and 1720mm), and then re-tighten the bolts securely. The stand offers 3-stage height adjustment for the metal poles.
Description: This diagram illustrates the height adjustment capability of the TV stand, showing a range from a minimum of 159cm to a maximum of 177cm. It highlights the three adjustable stages on the metal poles.
5.2: Adjusting TV Tilt Angle
The TV mounting bracket allows for a tilt adjustment of up to 15 degrees (up or down). Loosen the tilt adjustment knobs on the side of the bracket, set the desired angle, and then tighten the knobs firmly to secure the TV in position.
5.3: Moving the TV Stand
To move the stand, ensure all caster brakes are disengaged. Gently push the stand to its new location. The 360° rotating casters allow for easy maneuverability.
Description: This image demonstrates the ease of moving the TV stand due to its casters. A person is shown effortlessly pushing the stand, while another image shows a person struggling with a non-mobile stand.
5.4: Locking the Casters
Once the stand is in its desired position, engage the brakes on all four casters by pressing down on the lever located on each wheel. This will prevent the stand from moving accidentally.
Description: This image provides a close-up view of a caster wheel, highlighting the brake lever. The blue arrow indicates the action to engage the lock, ensuring the stand remains stationary.
5.5: Cable Management
Utilize the integrated cable management features on the back of the stand and the provided cable ties to organize and conceal TV and device cables for a tidy appearance.
6. Maintenance
- Cleaning: Wipe the stand with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by drying. Avoid abrasive cleaners or solvents.
- Inspections: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
- Caster Care: Keep casters free of dust and debris to ensure smooth movement.
7. Troubleshooting
- Stand is unstable:
- Ensure all assembly screws are fully tightened.
- Verify that the TV weight and VESA pattern are within the specified limits.
- Ensure the stand is placed on a flat, level surface.
- Lock all casters when the stand is stationary.
- Difficulty moving the stand:
- Check if all caster brakes are disengaged.
- Clean any debris from the caster wheels.
- TV is not level:
- Adjust the tilt mechanism on the TV mounting bracket.
- Ensure the stand itself is level on the floor.
- Missing parts or incorrect screws:
- Refer to the package contents list. If parts are missing or incorrect, contact customer support for assistance.
8. Warranty and Support
FORGING MOUNT products come with a 1-year manufacturer's warranty from the date of purchase.
For any questions, concerns, or issues regarding your product, including missing parts or assembly difficulties, please contact FORGING MOUNT customer support through your Amazon account:
- Go to Account Service.
- Select Order History.
- Find your order for the FORGING MOUNT Mobile TV Stand.
- Click on Seller.
- Select Ask a Question to contact us directly.
Our support team is available to assist you.