FLEXISPOT MAH0002301

FLEXISPOT Electric Height Adjustable Standing Desk User Manual

Model: MAH0002301

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your FLEXISPOT Electric Height Adjustable Standing Desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

Safety Instructions

Package Contents

Verify that all parts listed below are included in your package:

FLEXISPOT Standing Desk packaging showing 'JUST ONE PACKAGE'
Figure 1: Product packaging indicating all components are included in one package.

Setup and Assembly

Follow these steps to assemble your FLEXISPOT Standing Desk. All necessary tools are included.

  1. Unpack all components and lay them out on a clean, flat surface.
  2. Assemble the desk frame according to the provided diagrams. Ensure all screws are tightened securely.
  3. Attach the desktop to the assembled frame.
  4. Mount the control panel to the underside of the desktop in your preferred location.
  5. Connect all necessary cables from the motor and control panel.
  6. Attach the side storage hooks if desired.
FLEXISPOT Standing Desk with laptop, monitor, and accessories
Figure 2: Fully assembled FLEXISPOT Standing Desk ready for use.

Assembly Video Guide

Video 1: Official FLEXISPOT installation guide for 40/48 inch standing desks. This video provides a visual walkthrough of the assembly process.

Operating Instructions

Your FLEXISPOT desk features an intuitive control panel for easy height adjustments.

Multi-function keypad with LED display, up/down keys, and memory function buttons
Figure 3: Multi-function keypad for desk operation.

Memory Presets

The control panel allows you to save up to four preferred height settings for quick adjustments.

  1. Adjust the desk to your desired height using the up/down arrows.
  2. Press the "M" button (Memory) followed by one of the numbered preset buttons (1, 2, 3, or 4) to save the current height to that preset.
  3. To recall a saved height, simply press the corresponding numbered preset button. The desk will automatically move to the saved position.

Features

Desk showing minimum and maximum height adjustments
Figure 4: Desk height adjustment range from 29" to 46.5".
Close-up of side storage hooks on the desk
Figure 5: Convenient side storage hooks for accessories.
Noise level comparison chart showing desk motor is less than 50dB
Figure 6: The desk operates with a whisper-quiet motor, less than 50dB.

Maintenance

Troubleshooting

ProblemPossible CauseSolution
Desk does not move.Power cable disconnected; Motor error.Check power connections; Unplug and replug the desk after 30 seconds.
Uneven height adjustment.Drive rod misalignment.Refer to assembly video for drive rod alignment.
Desk makes unusual noise.Loose screws; Obstruction.Tighten all screws; Check for obstructions under the desk.

Specifications

FeatureDetail
BrandFLEXISPOT
Model NumberMAH0002301
Product Dimensions24"D x 48"W x 29"H
ColorMaple
Base MaterialAlloy Steel
Top Material TypeEngineered Wood
Height Range28.9" - 46.5"
Maximum Weight Capacity154 Pounds
Noise Level<50dB
Assembly RequiredYes
Included ComponentsControl Panel, Desk Legs, Installation Instructions, Installation Tools

Warranty and Support

FLEXISPOT offers a limited warranty for this product. For specific warranty details, please refer to the documentation included with your purchase or visit the official FLEXISPOT website.

If you have any questions, require assistance with assembly, or encounter any issues with your desk, please contact the FLEXISPOT support team. Contact information can typically be found on the product packaging or the official brand website.

This product is sold and fulfilled by FlexiSpot, ensuring dedicated customer support.